"Effect of Aqueous Extracts of Salvadora persica “Miswak” on the Acid Eroded Enamel Surface at Nano-Mechanical Scale"
written by Tahani M. Bawazeer, Mohammad S. Alsoufi, Dina Katowah, Waad S. Alharbi,
published by Materials Sciences and Applications, Vol.7 No.11, 2016
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Amendments of the Structural and Physical Properties of Cotton Fabrics Dyed with Natural Dye and Treated with Different Mordants
2019
[2] Salvadora Persica branches biomass adsorbent for removal of uranium(VI) and thorium(IV) from aqueous solution: kinetics and thermodynamics study
2019
[3] Quantitative analysis of 0% infill density surface profile of printed part fabricated by personal FDM 3D printer
2018
[4] Experimental Investigations into the Mechanical, Tribological, and Corrosion Properties of Hybrid Polymer Matrix Composites Comprising Ceramic Reinforcement for …
International Journal of Biomaterials, 2018
[5] Surface roughness quality and dimensional accuracy—a comprehensive analysis of 100% infill printed parts fabricated by a personal/desktop cost-effective …
2018
[6] Surface Roughness Quality and Dimensional Accuracy-A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective …
2018
[7] Mechanical reverse engineering approach for precise measurements of reproducing disc CAM
2018
[8] Experimental Investigation of Wire-EDM Process Parameters for Surface Roughness in the Machining of Carbon Steel 1017 and Aluminum Alloy 6060
2018
[9] Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost …
2018
[10] The Effect of Detergents on the Appearance of Automotive Clearcoat Systems Studied in an Outdoor Weathering Test
2017
[11] Abrasive WaterJet Machining of Thick Carrara Marble: Cutting Performance vs. Profile, Lagging and WaterJet Angle Assessments
2017
[12] Influence of Abrasive Waterjet Machining Parameters on the Surface Texture Quality of Carrara Marble
2017
[13] How Surface Roughness Performance of Printed Parts Manufactured by Desktop FDM 3D Printer with PLA+ is Influenced by Measuring Direction
2017
[14] Surface Roughness and Knoop Indentation Micro-Hardness Behavior of Aluminium Oxide (Al2O3) and Polystyrene (C8H8) n Materials
2016