"Effect of Nano Size TiO2 Particles on Mechanical Properties of AWS E 11018M Type Electrode"
written by Tapan Kumar Pal, Utpal Kumar Maity,
published by Materials Sciences and Applications, Vol.2 No.9, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Microstructural Study for Optimization of Ce Content of Austempered Ductile Iron (ADI) Weld Metal
2019
[2] Cr6+ reduction in welding fumes by nano composite coatings on stainless steel manual metal arc welding electrodes
Process Safety and Environmental Protection, 2018
[3] Effect of Ti Addition on the Microstructure and Mechanical Properties of Weld Metals in HSLA Steels
Journal of Materials Engineering and Performance, 2018
[4] Influence of nano-sized flux materials in the reduction of the Cr (VI) in the stainless steel welding fumes
Journal of Manufacturing Processes, 2018
[5] Progress in Solar Energy and Engineering Systems
2017
[6] Modeling width of Weld in SAW with Adding Nano Material
2017
[7] Experimental investigation and optimization analysis of weld penetration in SAW of mild steel plates of solar fin coated with TiO2/Cr2O3 nano-particles by …
2017
[8] Rutile Electrodes Enhanced with TiO2 Nanoparticles
Advanced Materials Research, 2016
[9] Rutile Electrodes Enhanced with TiO2 Nanoparticles.
Advanced Materials Research, 2016
[10] Modification of cellulose and rutile welding electrode coating by infiltrated TiO2 nanoparticles
Metals and Materials International, 2016
[11] EFFECT OF NANOMATERIAL ADDITION USING GMAW AND GTAW PROCESSES
Rev. Adv. Mater. Sci., 2016
[12] Modeling  of  weld  height  in  gas  metal  arc  welding  process  in  the  presence  of  TiO 2  Nano-Particles  using  artificial  neural  network
2015
[13] Welding Fumes Reduction by Coating of Nano TiO< sub> 2 on Electrodes
Journal of Materials Processing Technology, 2015
[14] Modeling and optimization of dilution in SAW in the presence of Cr2O3 nano-particles
The International Journal of Advanced Manufacturing Technology, 2015
[15] The application of imperialist competitive algorithm for optimization of deposition rate in submerged arc welding process using TiO2 nano particle
Journal of Mechanical Science and Technology, 2015
[16] Welding Fume Reduction by Nano-Alumina Coating on Electrodes–Towards Green Welding Process
Journal of Cleaner Production, 2015
[17] مدل‌سازی ارتفاع جوش در فرآیند جوشکاری قوس الکتریکی با گاز محافظ در حضور نانوذرات TiO2 توسط شبکه‌ی عصبی مصنوعی‎
مهندسی مکانیک مدرس, 2015
[18] Optimization of the Depth of Penetration by Welding Input Parameters in SAW Process Using Response Surface Methodology
Metallurgical and Materials Transactions B, 2015
[19] Obtaining the creep constitutive parameters for the layers of butt-welded 1.25Cr0.5Mopipe
Modares Mechanical Engineering, 2015
[20] Welding fumes reduction by coating of nano-TiO2 on electrodes
Journal of Materials Processing Technology, 2015
[21] Strategies for Controlling Welding Fumes at the Source-A Review.
Applied Mechanics & Materials, 2014
[22] Strategies for Controlling Welding Fumes at the Source-A Review
2014
[23] Combined effect of TiO2 nanoparticles and input welding parameters on the weld bead penetration in submerged arc welding process using fuzzy logic
The International Journal of Advanced Manufacturing Technology, 2014
[24] Predicting the combined effect of TiO2 nano-particles and welding input parameters on the hardness of melted zone in submerged arc welding by fuzzy logic
Journal of Mechanical Science and Technology , 2013
[25] Effect of combining Cr2O3 nano-particles and welding input parameters on the heat affected zone width in submerged arc welding process
2012