Natural Resources

Natural Resources

ISSN Print: 2158-706X
ISSN Online: 2158-7086
www.scirp.org/journal/nr
E-mail: nr@scirp.org
"Applications of Natural Fibers and Its Composites: An Overview"
written by M. R. Sanjay, G. R. Arpitha, L. Laxmana Naik, K. Gopalakrishna, B. Yogesha,
published by Natural Resources, Vol.7 No.3, 2016
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Design and Analysis of Sedan Car B-Pillar Outer Panel Using Abirbara with S-Glass Fiber Hybrid Composites
2021
[2] Raw and chemically treated bio‐waste filled (Limonia acidissima shell powder) vinyl ester composites: Physical, mechanical, moisture absorption properties, and …
2021
[3] Eco-friendly, bio-degradable and compostable plates from areca leaf
2020
[4] Experimental investigation on mechanical properties of banana/snake grass fiber reinforced hybrid composites
2020
[5] Modelling Mullins Effect Induced by Chain Delamination and Reattachment
2020
[6] A synergistic flame retardant of glycosyl cross-linking boron acid and ammonium salt of phytic acid to enhance durable flame retardancy of cotton fabrics
2020
[7] Investigation on Mechanical Behavior of Sisal Fiber Reinforced Polylactic Acid and Sisal/Epoxy Composites
2020
[8] Assessment of the mechanical properties of Peruvian Stipa Obtusa fibers for their use as reinforcement in composite materials
2020
[9] A comprehensive study on electrospinning of poly (vinyl alcohol): effects of the TCD, applied voltage, flow rate and solution concentration
2020
[10] Potential of Syngonanthus nitens fiber as a reinforcement in epoxy composite and its mechanical characterization
2020
[11] XPS and FTIR Studies of DC Reactive Magnetron Sputtered TiO2 Thin Films on Natural Based-Cellulose Fibers
2020
[12] Fabrication of Automobile Component Using Hybrid Natural Fiber Reinforced Polymer Composite
2020
[13] Forecasting the Finest Firmness of Biocomposites using Response Surface Design Methodology
2020
[14] Investigation on Mechanical Characteristics of Luffa Natural Fiber Reinforced Polymer Composite Materials.
2020
[15] Acoustic and mechanical characterisation of polypropylene composites reinforced by natural fibres for automotive applications
2020
[16] Characterization of mechanical behavior of pineapple leaf fiber composite
2020
[17] Effect of grain size on the structure and properties of coir epoxy composites
2020
[18] Physico-chemical and morphological evaluation of palm kernel shell particulate reinforced aluminium matrix composites
2020
[19] Thermal, acoustic, and dielectric behavior of epoxy-based hybrid composites using short hair fiber
2020
[20] Structural, thermal and mechanical properties of composites of poly (butylene adipate-co-terephthalate) with wheat straw microcrystalline cellulose
2020
[21] Tensile Properties of Bamboo Fiber Filled with Rock Dust Filler Reinforced Hybrid Composites
2020
[22] Immobilization of ferric tannate on wood fibers to functionalize wood fibers/diphenylmethane di-isocyanate composites
2020
[23] RESEARCH PAPER DRY SLIDING WEAR AND SURFACE MORPHOLOGICAL EXAMINATION OF AN ALUMINIUM MATRIX COMPOSITE REINFORCED WITH …
2020
[24] Kenaf fibre treatment and its impact on the static, dynamic, hydrophobicity and barrier properties of sustainable polystyrene biocomposites
2020
[25] Hybrid Fiber Composites
2020
[26] Natural Resources Based Green Composite Materials
2020
[27] Advancement in materials for industrial safety helmets
2020
[28] Introduction to Composite Materials
2020
[29] Biofunctionalization of Natural Fiber-Reinforced Biocomposites for Biomedical Applications
2020
[30] A new study on effect of various chemical treatments on Agave Americana fiber for composite reinforcement: Physico-chemical, thermal, mechanical and …
2020
[31] Challenges on machining characteristics of natural fiber-reinforced composites–A review
2020
[32] Microcrystalline cellulose treated by steam explosion and used for thermo-mechanical improvement of polypropylene
2020
[33] Natural and Synthetic Fibers for Hybrid Composites
2020
[34] Preparation and characterization of sodium silicate–treated jute-cotton blended polymer–reinforced UPR-based composite: effect of γ-radiation
2020
[35] Emerging Natural Fiber-Reinforced Cement Materials and Technology for 3D Concrete Printing: A Review
2020
[36] Fabrication and Characterization of Banana Fiber Reinforced Unsaturated Polyester Resin Based Composites
2020
[37] Effects of length and content of natural cellulose fiber on the mechanical behaviors of phenol formaldehyde composites
2020
[38] A novel approach for development of printed circuit board from biofiber based composites
2020
[39] A comprehensive review on material selection for polymer matrix composites subjected to impact load
2020
[40] Mechanical behavior of a composite material using a polyester matrix reinforced with Guadua angustifolia bamboo fibers
2020
[41] Mechanical behaviour and microscopic analysis of epoxy and E-glass reinforced banyan fibre composites with the application of artificial neural network and deep …
2020
[42] Bio-treatment of poplar via amino acid for interface control in biocomposites
2020
[43] Recent Advances of Hybrid Fiber Composites for Various Applications
2020
[44] Digital image correlation and acoustic emission for damage analysis during tensile loading of open-hole flax laminates
2020
[45] Influence of Gamma Radiation on Mechanical Properties of Jute Fabric-Reinforced Polymer Composites
2020
[46] Water Hyacinth for Biocomposites—An Overview
2020
[47] Characterization of New Cellulosic Fibers Obtained from Zingiber Officinale
2020
[48] Surface Modification of Bast-Based Natural Fibers through Environment Friendly Methods
2019
[49] FABRICATION AND CHARACTERIZATION OF ACACIA TORTILIS NATURAL FIBER RENFORCED POLYMER COMPOSITE EXTRACTED FROM ACACIA …
2019
[50] Lyophilized Protein Structures as an Alternative Biodegradable Material for Food Packaging
2019
[51] New Lignocellulosic Aristida adscensionis Fibers as Novel Reinforcement for Composite Materials: Extraction, Characterization and Weibull Distribution Analysis
2019
[52] Review of natural fiber-reinforced engineering plastic composites, their applications in the transportation sector and processing techniques
2019
[53] Tribological Properties of Calotropis Procera Natural Fiber Reinforced Hybrid Epoxy Composites
2019
[54] Mechanical Properties of Banana Fibers Reinforced Polyester Composite
2019
[55] Mechanical Properties of Woven Carbon Fiber/Kenaf Fabric Reinforced Epoxy Matrix Hybrid Composites
2019
[56] MECHANICAL AND THERMAL PROPERTIES OF GRAPHENE OXIDE REINFORCED POLYPROPYLENE/PINEAPPLE LEAVES FIBRE COMPOSITES
PERINTIS eJournal, 2019
[57] Antimicrobial Natural Cellulose Fibers from Hyptis suaveolens for Potential Biomedical and Textiles Applications
2019
[58] Bagasse sugarcane fibers as reinforcement agents for natural composites: description and polymer composite applications
2019
[59] A Study on The Effect of Sic on Mechanical Properties of Carbon/Banana Peduncle Fiber Reinforced Epoxy Composites
2019
[60] Effect of Steam Treatment on the Characteristics of Oil Palm Empty Fruit Bunch and Its Biocomposite
Indonesian Journal of Chemistry, 2019
[61] Modified hemp fibers intended for fiber‐reinforced polymer composites used in structural applications—A review. I. Methods of modification
2019
[62] Experimental Investigation on Natural Fibers Composite for Sustainable Development
2019
[63] Experimental Investigation on Mechanical Joint of Lontar (Borassus Flabellifer) Fiber Reinforced Polyester Composites under Static Flexural Test
2019
[64] Propuesta de aprovechamiento de la fibra de plátano en la región del Ariari Departamento del Meta
2019
[65] Caracterización de un material compuesto de matriz poliéster reforzada con fibra de yute precargada mediante moldeo por compresión
2019
[66] Textile: Substrates Modification by Novel Polymers
2019
[67] Effect of Graphene Powder on Banyan Aerial Root Fibers Reinforced Epoxy Composites
2019
[68] Effect of Agro-waste Microcoir Pith and Nano-alumina Reinforcement on Thermal Degradation and Dynamic Mechanical Behavior of Polyester Composites
2019
[69] Preparation and studies of pigeon pea stalk/polypropylene composites with and without compatibilizer
2019
[70] An Experimental Investigation on Tensile Properties of Hybrid BioPolyurethane Composite: Modeling and Optimization
2019
[71] Characterization of cellulosic fibre from Phoenix pusilla leaves as potential reinforcement for polymeric composites
2019
[72] Tribo-functional effects of double-crossed helix on surface finish, cutting friction and tool wear mechanisms during the milling process of natural fiber composites
2019
[73] Natural Fibers as Sustainable and Renewable Resource for Development of Eco-friendly Composites: A Comprehensive Review
2019
[74] Manufacture of Hybrid Natural/Synthetic Fiber Woven Textiles for Use in Technical Biocomposites with Maximum Biobased Content
2019
[75] Mechanical Properties of Short Sisal Fiber Reinforced Polylactic Acid (PLA) Biocomposite Processed by Injection Molding
2019
[76] Tailoring the Effective Properties of Typha Fiber Reinforced Polymer Composite via Alkali Treatment
2019
[77] Hybridization of Hemp Fiber and Recycled-Carbon Fiber in Polypropylene Composites
2019
[78] Mechanical evaluation of hybrid natural fibre–reinforced polymeric composites for automotive bumper beam: a review
2019
[79] Effect of pineapple leaf (PALF), napier, and hemp fibres as filler on the scratch resistance of epoxy composites
2019
[80] Water absorption behaviour on the mechanical properties of woven hybrid reinforced polyester composites
2019
[81] Characterization and Properties of Oil Palm Empty Fruit Bunch Reinforced Polyvinyl Alcohol Thin Films
2019
[82] Redesign a table arm for folding table using natural composite material and evaluate the strength of material
2019
[83] Effect of processing parameters on tensile properties of recycled polypropylene based composites reinforced with jute fabrics
2019
[84] A brief review of computational analysis and experimental models of composite materials for aerospace applications
2019
[85] Hybridization of Bast Natural and Synthetic Fibers in Thermoplastic Composites
2019
[86] Natural Fibers as Viable Sources for the Development of Structural, Semi-Structural, and Technological Materials–A Review
Advanced Materials Letters, 2019
[87] Additive Manufacturing: A Novel Method for Developing an Acoustic Panel Made of Natural Fiber-Reinforced Composites with Enhanced Mechanical and Acoustical …
2019
[88] Characterization and properties of cellulose microfibers from water hyacinth filled sago starch biocomposites
2019
[89] A Study of Chemical Treatment of Natural Fibers and Its Effect on the Mechanical Properties of Developed Composites
2019
[90] The effects of the temperature on the mechanical properties of natural yarns
2019
[91] Development of Vinyl Ester and Reed Composite Material with Weight Fraction of 10% and Reinforcement at Different Orientations
2019
[92] Tribological and dynamic mechanical analysis of bio-composites: A review
2019
[93] Natural Rubber Composites Filled with Crop Residues as an Alternative to Vulcanizates with Common Fillers
2019
[94] Mechanical properties of the Jute fibers-activated carbon filled reinforced polyester composites
2019
[95] Effect of agglomerated zirconia-toughened mullite on the mechanical properties of giant cane fiber mat epoxy laminated composites
2019
[96] Structural Analysis of Natural Fiber Reinforced Epoxy-Hybrid Composites
2019
[97] Influence of Poly (vinyl butyral) Modification on the Mechanical and Thermal Properties of Kevlar Fiber Reinforced Novolac epoxy/multiwalled carbon nanotube …
2019
[98] Mechanical Behaviour of Areca Nut, Sunn Hemp Natural Fibers and E-Glass Fibers Reinforced With Epoxy Composites
International Journal of Engineering and Advanced Technology, 2019
[99] Optimization of Sulfuric Acid Concentration and Hydrolysis Time on Crystallinity of Nanocrystalline Cellulose: A Response Surface Methodology Study
2019
[100] Effect of silanized sisal fiber on thermo-mechanical properties of reinforced epoxy composites
2019
[101] Tensile Properties of Hybrid Woven Glass Fibre/PALF Reinforced Polymer Composite
2019
[102] Processing of Green Composites
Green Composites, 2019
[103] Characterization of natural fiber reinforced polymer composites
2019
[104] Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens
2019
[105] Fused deposition processing polycaprolactone of composites for biomedical applications
2019
[106] Polymer Nanocomposites for Advanced Automobile Applications
2019
[107] Insitu Self-Assembly of Bacterial Cellulose on Banana Fibers Extracted from Peels
2019
[108] A review on Sterculia urens Roxb.: a boon to the livelihood for tribal people and industry
2019
[109] Meta-analysis of Student Performance Assessment Using Fuzzy Logic
2019
[110] Investigation on mechanical properties of polyurethane hybrid nanocomposite foams reinforced with roselle fibers and silica nanoparticles
2019
[111] Study on Carbon, Glass, and Flax Hybrid Composites Using Experimental and Computational Techniques
2019
[112] Effect of hemp fibre length on the properties of polypropylene composites
2019
[113] Synergistic effect of hybrid Himalayan Nettle/Bauhinia-vahlii fibers on physico-mechanical and sliding wear properties of epoxy composites
2019
[114] Natural fiber–reinforced composites: A review on material, manufacturing, and machinability
2019
[115] The potential application of cereal straw as a bio-filler for elastomer composites
2019
[116] A review on the properties of natural fibres and its bio-composites: Effect of alkali treatment
2019
[117] Tensile strength of flax fabrics to be used as reinforcement in cement-based composites: experimental tests under different environmental exposures
2019
[118] Physical and Thermal Properties of Novel Native Andean Natural Fibers
2019
[119] PENGARUH FRAKSI VOLUME KOMPOSIT SERBUK CANGKANG KELAPA SAWIT/EPOKSI TERHADAP KEKERASAN DAN LAJU KEAUSAN
2019
[120] Bagasse sugarcane fibers as reinforcement agents for natural composites: description and polymer composite applications Fibras de bagazo de caña de …
2019
[121] Toughness and Fracture Surface of Frame of Drone Based on Composite from Waste Materials
2019
[122] KARAKTERISASI BIOKOMPOSIT BERBAHAN PATI TAPIOKA DAN CHITOSAN DIPERKUAT OLEH SERAT NANO BACTERIAL CELLULOSE YANG DIPERSIAPKAN …
2019
[123] Fabrication and characterization of ceramic fibers from preceramic polymers
2019
[124] Impact, Hardness and Water Absorption Properties of Natural Fibres (Banana, Hemp and Sisal) Hybrid Composite Material
2019
[125] Physical and acoustic properties of petroleum and renewable based polyurethane foam filled with shorea leprosula
2018
[126] Properties of Combretum dolichopetalum Fibre-High Density Polyethylene (HDPE) Composites
2018
[127] ANALYSIS OF ENGINEERING PROPERTIES OF LATERITE
2018
[128] Moldagem de compósitos de pead reciclado com tecido de fibras de juta e avaliação de propriedades de flexão
2018
[129] Analysis of Engineering Properties of Laterite Blocks Reinforced with Pineapple Leaf Fibres
2018
[130] ALKALINE TREATMENTS ON EFB FIBRE: THE EFFECT ON MECHANICAL-PHYSICAL PROPERTIES AND FIBRE-CEMENT HYDRATION RATE
Malaysian Construction Research Journal, 2018
[131] Kompozyty polimerowe zawierające włókna roślinne-czynniki wpływające na wytrzymałość mechaniczną
2018
[132] Properties of White Roselle (Hibiscus sabdariffa) Fibers
2018
[133] Fabrication and Properties of Polypropylene and Kenaf Fiber Composite
IOP Conference Series: Materials Science and Engineering, 2018
[134] Effect of Alfa Fiber Mechanical Separation on Dielectric Properties of Hybrid Unsaturated Polyester Composites
Polymer composites, 2018
[135] Experimental and Analysis of Jute Fabric with Silk Fabric Reinforced Polymer Composites
2018
[136] Effect of hygrothermal ageing on the hardness and drilling time of natural fiber composite material
2018
[137] Evaluation of machining performance of pineapple filler based reinforced polymer composites using abrasive water jet machining process
IOP Conference Series: Materials Science and Engineering, 2018
[138] Tensile and flexural properties of natural fiber reinforced polymer composites: A review
Journal of Reinforced Plastics and Composites, 2018
[139] Influence of the delignification process on the properties of panels made with Guadua fibers and plant resin
Industrial Crops and Products, 2018
[140] Effect of Various Chemical Treatments of Prosopis juliflora Fibers as Composite Reinforcement: Physicochemical, Thermal, Mechanical, and Morphological …
Journal of Natural Fibers, 2018
[141] A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization
2018
[142] Effects of Fiber Size and Fiber Content on Mechanical and Physical Properties of Mengkuang Reinforced Thermoplastic Natural Rubber Composites
2018
[143] Potential of natural/synthetic hybrid composites for aerospace applications
Sustainable Composites for Aerospace Applications, 2018
[144] Vibration analysis of Hybrid fabrics reinforced polymer matrix curved composite beams
Composites: Mechanics, Computations, Applications: An International Journal, 2018
[145] Mechanical Characterization of Areca husk-Coir fiber reinforced hybrid Composites
Materials Today: Proceedings, 2018
[146] Obtaining and Optimization of Cellulose Pulp from Leaves of Agave tequilana Weber Var. Blue. Preparation of Handmade Craft Paper
Waste and Biomass Valorization, 2018
[147] Effect of stacking sequence on properties of coconut leaf sheath/jute/E-glass reinforced phenol formaldehyde hybrid composites
Journal of Industrial Textiles, 2018
[148] ANALISA SIFAT FISIK DAN MEKANIK DARI GREEN COMPOSITE MATERIAL DARI LIMBAH STYROFOAM, AMPAS TEBU DAN CANGKANG TELUR SEBAGAI …
2018
[149] A review on synthesis and characterization of commercially available natural fibers: Part-I
Journal of Natural Fibers, 2018
[150] Synthesis and characterization of cellulosic fiber from red banana peduncle as reinforcement for potential applications
Journal of Natural Fibers, 2018
[151] The Hybrid Effect of Jute/Kenaf/E-Glass Woven Fabric Epoxy Composites for Medium Load Applications: Impact, Inter-Laminar Strength, and Failure Surface …
Journal of Natural Fibers, 2018
[152] Fabrication of Glass/Jute/Epoxy Composite Based Industrial Safety Helmet
Materials Today: Proceedings, 2018
[153] Characterization and properties of natural fiber polymer composites: A comprehensive review
Journal of Cleaner Production, 2018
[154] Experimental determination of elastic modulus of elasticity and Poisson's coefficient of date palm tree fiber
Journal of Religion, Spirituality & Aging, 2018
[155] Water-resistant hemp fiber-reinforced composites: In-situ surface protection by polyethylene film
Industrial Crops and Products, 2018
[156] Modeling and Predicting the Mechanical Properties of Nano Clay Dispersed Natural Fiber Hybrid Intra-ply Woven Fabric Composite by Using Response Surface …
Advanced Manufacturing and Materials Science, 2018
[157] Characterization of natural cellulosic fiber from bark of Albizia amara
Journal of Natural Fibers, 2018
[158] Effect of untreated fiber loading on the thermal, mechanical, dielectric, and microwave absorption properties of polycaprolactone reinforced with oil palm empty fruit bunch biocomposites
Polymer composites, 2018
[159] Development of a Batik Fiberglass Composite for Marine Applications Based on Water Absorption Testing
Engineering Applications for New Materials and Technologies, 2018
[160] Tert-butyl catechol/alkaline-treated kenaf/jute polyethylene hybrid composites: impact on physico-mechanical, thermal and morphological properties
Polymer Bulletin, 2018
[161] Study on characterization and physicochemical properties of new natural fiber from Phaseolus vulgaris
Journal of Natural Fibers, 2018
[162] A comprehensive review on surface modification, structure interface and bonding mechanism of plant cellulose fiber reinforced polymer based composites
Composite Interfaces, 2018
[163] Influence of Chemical Surface Modifications on Mechanical Properties of Combretum dolichopetalum Fibre-High Density Polyethylene (HDPE) Composites
Pakistan Journal of Scientific and Industrial Research Series A: Physical Sciences, 2018
[164] Comparison of fibres properties of azadirachta indica and acacia arabica plant for lightweight composite applications
STRUCTURAL INTEGRITY AND LIFE, 2018
[165] Natural Fibers for Sustainable Bio-Composites
2018
[166] Funcionalizacion De Nanocelulosa Extraida De Estopa De Fique Mediante Su Modificacion Con Nanoparticulas De Plata.
2018
[167] Toughness and Fracture Surface of Frame of Drone Based on Green Composite Materials
2018
[168] VIBRATIONAL ANALYSIS OF HYBRID FABRIC-REINFORCED POLYMER MATRIX CURVED COMPOSITE BEAMS
2018
[169] The potential of nanoclay modified Spartium junceum L. fibres used as reinforcement in PLA matrix composites for automotive applications
2018
[170] COMPATIBILITY ASSESSMENT FOR PHYSICAL AND MECHANICAL PROPERTIES OF EMPTY FRUIT BUNCH CEMENT-BONDED FIBREBOARD
2018
[171] Experiment on Morphological Characteristics and Mechanical Behaviour of Arecanut Husk Fibre (AHF)
2018
[172] A comprehensive review of techniques for natural fibers as reinforcement in composites
2018
[173] Mechanical Properties of Gamma-Irradiated Natural Fiber Reinforced Composites
2018
[174] Studies on the degradation of jute blended cotton fabric in soil, water and ambient atmosphere
2018
[175] Investigation on Flax Natural Fiber Reinforced Polymer Matrix Composites
International Journal of Engineering Research & Technology (IJERT), 2018
[176] Investigation of Mechanical Properties of Natural Fibers–A Review
International Journal of Innovative Science and Research Technology, 2017
[177] Feasibility of incorporating treated lignin and cellulose nanofiber in fiberboards made from corn stalk and rice straw
2017
[178] Testing Methods for Composite Materials
2017
[179] Review on Three-Dimensionally Emulated Fiber-Embedded Lactic Acid Polymer Composites: Opportunities in Engineering Sector
International Journal of Sustainable Development & World Ecology, 2017
[180] Application of Antimicrobial Microcapsules on Agrotextiles
2017
[181] Mechanical Properties of Phenol Formaldehyde Hybrid Composites Reinforced with Natural Cellulose Fibers
2017
[182] Bacterial cellulose-assisted de-lignified wheat straw-PVA based bio-composites with novel characteristics
Carbohydrate Polymers, 2017
[183] State-of-Art on Hybridization of Natural Fiber Reinforced Polymer Composites
2017
[184] Tensile Property Evaluation of Sisal–Glass Fiber Reinforced Polymer Based Composites
International Journal of Composite Materials, 2017
[185] Physicochemical Properties of New Cellulosic Fibers from Azadirachta indica Plant
Ironmaking & Steelmaking: Processes, products and Applications, 2017
[186] Characterization of New Natural Cellulosic Fiber from Heteropogon Contortus Plant
International Journal of Food Sciences and Nutrition, 2017
[187] A review on mode-I interlaminar fracture toughness of fibre reinforced composites
Journal of Physics: Conference Series, 2017
[188] Study of a unidirectional flax reinforcement for biobased composite
Thèse, 2017
[189] Hybrid bast fiber reinforced thermoset composites
Hybrid Polymer Composite Materials, Volume 3, 2017
[190] Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites
Journal of Industrial Textiles, 2017
[191] MECHANICAL CHARACTERSTIZATION OF WOVEN PALMYRA/COIR FIBRE REINFORCED HYBRID POLYESTER COMPOSITES
2017
[192] Rotational molding of self‐hybrid composites based on linear low‐density polyethylene and maple fibers
Polymer Composites, 2017
[193] Effect of composition of fibers on properties of hybrid composites
International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), 2017
[194] Hybridization Effect of Sisal/Glass/Epoxy/Filler Based Woven Fabric Reinforced Composites
Experimental Techniques, 2017
[195] Characterisation of Pulp and Paper Manufactured from Oil Palm Empty Fruit Bunches and Kenaf Fibres.
2017
[196] Studies on hybridization effect of jute/kenaf/E-glass woven fabric epoxy composites for potential applications: Effect of laminate stacking sequences
Journal of Industrial Textiles, 2017
[197] Physicochemical and Thermal Properties of Ceiba pentandra Bark Fiber
Journal of Biomaterials Science Polymer Edition, 2017
[198] A review on synthesis and characterization of commercially available natural fibers: Part II
Studies in Higher Education, 2017
[199] Characterization of natural cellulosic fiber from Epipremnum aureum stem
Journal of the Textile Institute, 2017
[200] Investigating the impact of plant fibres in increasing the strength of concrete
International Journal of Applied Environmental Sciences (IJAES), 2017
[201] Review on Mechanical properties and Fatigue life of E-Glass/Bamboo Fiber Reinforced Polymer Composites
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & MANAGEMENT, 2017
[202] Effet de l'oxydation TEMPO des fibres de lin sur l'efficacité de greffage des agents de couplage silane
2017
[203] Mechanical Properties of Composite Waste Material Based Styrofoam, Baggase and Eggshell Powder for Application of Drone Frames
IOP Conference Series: Earth and Environmental Science, 2017
[204] Study of a unidirectional flax reinforcement for biocomposite
2017
[205] Processing Techniques of Polymer Matrix Composites–A Review
International Journal of Engineering Research and General Science, 2016
[206] Ocena primernosti bukove žagovine kot ojačitvene komponente pri pripravi termoplastičnih biokompozitov
2016
[207] Enzymatic and Bacterial modifications of natural Biofibres for Synthesis of biocomposites
2016
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top