"Studies on Mechanical Properties of Jute/E-Glass Fiber Reinforced Epoxy Hybrid Composites"
written by M. R. Sanjay, B. Yogesha,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2016
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Experimental Investigation of Mechanical Properties and Bio-compatibility of Glass Fiber Reinforced Polymer Composite as Bio-implant
2020
[2] The Comparative studies of mechanical and interfacial properties between jute and E-Glass fiber-reinforced unsaturated polyester resin based composites
2020
[3] Investigation of Fracture Parameters of Jute/Glass Reinforced Hybrid Composite and Analysis by Using FEA
2020
[4] Experimental evaluation and numerical validation of bending and impact behaviours of hybrid composites with various stacking arrangements
2019
[5] Studies on Tensile and Compression Characteristics of Silk-Cotton Reinforced Composites
International Journal of Engineering Research & Technology, 2019
[6] Fabrication & characterization of ZnS micro particulate filled glass and jute fibre reinforced hybrid polymer composites
2019
[7] Estimation of Tensile Properties for Jute Natural and its Hybrid Laminate Composites
International Journal of Engineering Research & Technology, 2019
[8] EXPERIMENTAL INVESTIGATION OF ARECA/JUTE/GLASS FIBER REINFORCED HYBRID COMPOSITE PLATES
INTERNATIONAL JOURNAL OF INFORMATION AND COMPUTING SCIENCE, 2019
[9] Optimization of mechanical/thermal properties of glass/flax/waste cotton hybrid composite
2019
[10] Comparison study of mechanical and dynamic vibration properties of hole defect introduced in hybrid polymer composite
2019
[11] Flexural Strength of Hybrid Mendong–C-glass/Epoxy Thermoseting Composites
2019
[12] Mechanical Characterization of Natural Fiber based Polymer Matrix Composite-A Review
2019
[13] Low Cost Pre Cast Fiber Reinforced Polymer Composites for Rural Applications
2019
[14] Fabrication and Characterization of E-Glass Fiber Reinforced Unsaturated Polyester Resin Based Composite Materials
2019
[15] Synthesis and properties of pandanwangi fiber reinforced polyethylene composites: Evaluation of dicumyl peroxide (DCP) effect
2019
[16] A Study on The Effect of Sic on Mechanical Properties of Carbon/Banana Peduncle Fiber Reinforced Epoxy Composites
2019
[17] Natural Fiber Reinforced Synthetic Polymer Composites
2019
[18] Effect of sulfuric acid solution on thermal conductivity and impact strength of epoxy resin reinforced by silicon dioxide powder
2019
[19] Investigating the Effect of Fiber Concentration and Fiber Size on Mechanical Properties of Rice Husk Fiber Reinforced Polyester Composites
2018
[20] Comparative Study of Mechanical and Tribological Behaviour of Thermoplast-Based Composites: With Inorganic and Natural Particulate Fillers
Emergent Research on Polymeric and Composite Materials, 2018
[21] Fabrication of Glass/Jute/Epoxy Composite Based Industrial Safety Helmet
2018
[22] Mechanical Properties of Gamma-Irradiated Natural Fiber Reinforced Composites
2018
[23] Vibration analysis of Hybrid fabrics reinforced polymer matrix curved composite beams
Composites: Mechanics, Computations, Applications: An International Journal, 2018
[24] A Study on Mechanical Properties of Symmetrical and Asymmetrical Woven Jute Fiber Composite Polymer
IOP Conference Series: Materials Science and Engineering, 2018
[25] BUCKLING BEHAVIOUR OF WOVEN GLASS FIBER COMPOSITE LAMINATE WITH DIFFERENT CUTOUTS
International Journal of Pure and Applied Mathematics, 2018
[26] Experimental and Analysis of Jute Fabric with Silk Fabric Reinforced Polymer Composites
2018
[27] The Bending Property of the Epoxy (Ep/Mgo) And (Ep/Sio2) Composites After Immersion in Chemical Solution
2018
[28] Effect of UV irradiation and water absorption on mechanical properties of epoxy composites
2018
[29] Dielectric properties and interfacial adhesion of jute, kenaf and E‐glass fabrics reinforcing epoxy composites
2018
[30] A review on synthesis and characterization of commercially available natural fibers: Part-I
Journal of Natural Fibers, 2018
[31] The Effects of Triggering Mechanisms on the Energy Absorption Capability of Circular Jute/Epoxy Composite Tubes under Quasi-Static Axial Loading
Applied Composite Materials, 2018
[32] Mechanical Properties and Wear Properties of Kenaf–Aloe Vera–Jute Fiber Reinforced Natural Fiber Composites
Materials Today: Proceedings, 2018
[33] A Review of Recent Developments in Natural Fiber Composites and their Mechanical, Thermal & Machinabilty Properties
Advanced Materials Research, 2018
[34] Effects of triggering mechanisms on the crashworthiness characteristics of square woven jute/epoxy composite tubes
Journal of Reinforced Plastics and Composites, 2018
[35] The study of the bending property of the epoxy (Ep/MgO) and (Ep/SiO2) composites in natural conditions and after immersion in chemical solution
2018
[36] VIBRATIONAL ANALYSIS OF HYBRID FABRIC-REINFORCED POLYMER MATRIX CURVED COMPOSITE BEAMS
2018
[37] Study of Tensile Behaviour by Variation of Kevlar to the Jute Fibre Epoxy Hybrid Composites
International Journal of Engineering Research & Technology (IJERT), 2017
[38] Finite Element Analysis of Jute and Banana Fibers Reinforced Composites for Mechanical Properties
2017
[39] Mechanical characterization and finite element analysis of composite material
2017
[40] Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites
Journal of Industrial Textiles, 2017
[41] A Comprehensive Study on Fracture of Natural Fibre Composites
International Journal of All Research Education and Scientific Methods, 2017
[42] Production and characterization of a hybrid polymer matrix composite
Polymer composites, 2017
[43] Polymer Composites for Industrial Safety Helmets: A Review
International Journal of Advanced Production and Industrial Engineering, 2017
[44] Tensile Property Evaluation of Sisal–Glass Fiber Reinforced Polymer Based Composites
International Journal of Composite Materials, 2017
[45] Hybrid bast fiber reinforced thermoset composites
2017
[46] Comparative study on Mechanical properties of E-glass/Epoxy laminates filled with Silicon carbide, Activated charcoal and Mica
International Research Journal of Engineering and Technology, 2017
[47] Fabrication and Characterization Of Zns Microparticulate Filled Glass And Jute Fiber Reinforced Hybrid Polymer Composites
2017
[48] Preparation and Analysis of Hybrid Epoxy Composites
2017
[49] Effect of Stacking Sequence and Hybridization on Mechanical Properties of Jute-Glass Fiber Composites.
2016
[50] A REVIEW ON MECHANICAL PROPERTIES OF NATURAL FIBER REINFORCED HYBRID COMPOSITES
International Research Journal of Engineering and Technology, 2016
[51] Review on Development of Glass Fiber/Epoxy Composite Material and its Characterizations
International Journal of Science, Engineering and Technology Research (IJSETR), 2016
[52] Mechanical characterization of coir/palmyra waste fiber hybrid composites
IOP Conference Series: Materials Science and Engineering, 2016
[53] Effect of stacking sequence and hybridization on mechanical properties of jute-glass fiber composites
2016