has been cited by the following article(s):
[1]
|
An Analysis of Process Parameters in the Hydroforming of a Hemispherical Dome Made of Fiber Metal Laminate
Applied Composite Materials,
2021
DOI:10.1007/s10443-021-09884-0
|
|
|
[2]
|
A comparative study on the GLARE stamp forming behavior using cured and non-cured preparation followed by hot-pressing
The International Journal of Advanced Manufacturing Technology,
2021
DOI:10.1007/s00170-021-07196-y
|
|
|
[3]
|
Surface topography evolution of woven thermoplastic composites under deformation
Composites Part B: Engineering,
2020
DOI:10.1016/j.compositesb.2020.107880
|
|
|
[4]
|
An Investigation into Process Parameters Effect on the Formability of GLARE Materials Using Stamp Forming
Applied Composite Materials,
2019
DOI:10.1007/s10443-019-09788-0
|
|
|
[5]
|
Effect of temperature on formability of glass mat reinforced thermoplastic sheets with ductile dummy sheets
Journal of Central South University,
2019
DOI:10.1007/s11771-019-4047-1
|
|
|
[6]
|
Effects of exposure time and intensity on the shot peen forming characteristics of Ti/CFRP laminates
Composites Part A: Applied Science and Manufacturing,
2016
DOI:10.1016/j.compositesa.2016.09.019
|
|
|