Comparison of Loading Functions in the Modelling of Automobile Aluminium Alloy Wheel under Static Radial Load

Journals Menu

Follow SCIRP

ISSN Print: 2165-3917
ISSN Online: 2165-3925
www.scirp.org/journal/ojapps
E-mail: ojapps@scirp.org

"Comparison of Loading Functions in the Modelling of Automobile Aluminium Alloy Wheel under Static Radial Load"
written by Samuel Onoriode Igbudu, David Abimbola Fadare,
published by Open Journal of Applied Sciences, Vol.5 No.7, 2015

has been cited by the following article(s):

[1]	Passenger Cars Wheel Performance Test Simulation for Service Life Evaluation: A Review
	Journal of Failure Analysis and …, 2022

[2]	Experimental Investigation on the Formability of Al-Mg Alloy 5052 Sheet by Tensile and Cupping Test
	Materials, 2022

[3]	Experimental Investigation on the Formability of Al‑Mg Alloy 5052 Sheet by Tensile and Cupping Test. Materials 2023, 15, 8949
	2022

[4]	Optimization and investigation of automotive wheel rim for efficient performance of vehicle
	Materials Today: Proceedings, 2021

[5]	Design and analysis of mesh size subjected to wheel rim convergence using finite element method
	Procedia Structural …, 2021

[6]	Influence of artificial aging time on bending characteristics of 6061 aluminum sheet
	2020

[7]	Wheels in automotive industry—-A case study toward the development of magnesium-based composite wheels
	2020

[8]	Modelling and Static Analysis of Wheel Spacer
	2019

[9]	Studi Numerik Pengaruh Variasi Jumlah Dan Ketebalan Spoke Pada Velg Paduan Aluminium Untuk Mobil MPV
	2019

[10]	A review on selection, manufacturing and testing of composite materials for alloy wheels
	2018

[11]	Effect of Mg, SiC and Fly Ash Particulates in Aluminium Alloy for Automotive Wheel Rim Applications
	2018

[12]	Investigation of Stress and Displacement Distribution in Advanced Steel Rims
	2017

[1]	Biocomposite and Synthetic Composites for Automotive Applications 2021 DOI:10.1016/B978-0-12-820559-4.00011-0

[2]	Design and Analysis of Mesh Size Subjected to Wheel Rim Convergence Using Finite Element Method Procedia Structural Integrity, 2021 DOI:10.1016/j.prostr.2021.10.008

[3]	Design and Analysis of Mesh Size Subjected to Wheel Rim Convergence Using Finite Element Method Procedia Structural Integrity, 2021 DOI:10.1016/j.prostr.2021.10.008

[4]	Influence of artificial aging time on bending characteristics of 6061 aluminum sheet Materialwissenschaft und Werkstofftechnik, 2020 DOI:10.1002/mawe.202000100

[5]	Influence of artificial aging time on bending characteristics of 6061 aluminum sheet Materialwissenschaft und Werkstofftechnik, 2020 DOI:10.1002/mawe.202000100

Follow SCIRP