Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"Effect of Surface Porosity on Tribological Properties of Sintered Pure Al and Al 6061"
written by Avijit Sinha, Zoheir Farhat,
published by Materials Sciences and Applications, Vol.6 No.6, 2015
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] The analysis of microstructure and mechanical properties in B4C reinforced Al–Zn alloy matrix composites manufactured using a new sintering approach
Russian Journal of Non-Ferrous Metals, 2022
[2] Investigation of solid particle erosion behavior of Al-Al2O3 and Al-ZrO2 metal matrix composites fabricated through powder metallurgy technique
Tribology International, 2022
[3] Titanium boride and titanium silicide phase formation by high power diode laser alloying of B4C and SiC particles with Ti: Microstructure, hardness and wear studies
Materials Today …, 2022
[4] A Comparative Study on Microstructure and Tribological Properties of Al/Gr Composites Prepared via Conventional and Flake Powder Metallurgy Techniques
Metallography, Microstructure, and Analysis, 2022
[5] Duplex electroless Ni-P/Ni-Cu-P coatings: Preparation, evaluation of microhardness, friction, wear, and corrosion performance
Journal of Electrochemical Science and …, 2022
[6] Influence of Porosity on Wear Resistance of Sintered Titanium under Boundary Lubrication
Journal of Friction and Wear, 2021
[7] Mechanical and Tibological Properties of SLM AlSi10Mg Alloy Subjected to ECAP
Solid State Phenomena, 2021
[8] Учредители: Государственное научное учреждение Институт механики металлополимерных систем имени ВА Белого НАН Беларуси
ТРЕНИЕ И ИЗНОС, 2021
[9] Влияние пористости на износостойкость спеченного титана в условиях граничной смазки
Трение и износ, 2021
[10] Mechanical, electrical, and biological properties of mechanochemically processed hydroxyapatite ceramics
Nanomaterials, 2021
[11] Tribology of Spray-Formed Aluminum Alloys and Their Composites
Tribology and Surface …, 2021
[12] Metal Matrix Composites Prepared by Powder Metallurgy Route
2021
[13] Effect of T6 heat treatment on the surface tribological and corrosion properties of AlSi10Mg samples produced by selective laser melting
2021
[14] Effect of copper incorporation on phase transformation behavior of electroless nickel–phosphorous coating and its effect on the tribological behavior
2021
[15] Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting
2021
[16] Effect of Different Sintering Temperatures on Microstructure and Mechanical Properties for Pure Al Material Produced by Powder Metallurgy
2021
[17] Oxidation issues during heat treatment and effect on the tribo-mechanical performance of electroless Ni-P–Cu deposits
2021
[18] Effect of SiCp reinforcement on mechanical properties of Al 6061 by Powder Metallurgy
2020
[19] A Statistical Assessment of Casting Quality–Tribological Properties of Eutectic Al-12Si Alloy: Effect of Mg
2020
[20] Caracterización de recubrimientos de aluminio procesados por proyección fría (Cold Spray) para reparaciones aeronáuticas
2020
[21] Investigation of mechanical and tribological properties of hybrid green eggshells and graphite-reinforced aluminum composites
2020
[22] High-strength Al0. 2Co1. 5CrFeNi1. 5Ti high-entropy alloy produced by powder metallurgy and casting: A comparison of microstructures, mechanical and tribological …
2020
[23] Thermal shock resistance of yttrium aluminium oxide Y3Al5O12 thermal barrier coating for titanium alloy
2020
[24] Strengthening of the mechanical and tribological properties of composite oxide film formed on aluminum alloy with the addition of graphite
2020
[25] Enhancing the Microstructure and Tribological Performance of Spray Formed Al Alloy by Cryorolling
2020
[26] Studies on mechanical properties of the sintered bronze-graphite composites
2019
[27] Investigations for Surface Hardness of Aluminum Matrix Composites with Hybrid Reinforcement
2019
[28] Investigation of nanomechanical and adhesion behavior for AlN coating and AlN/Fe2-3N composite coatings created by Active Screen Plasma Nitriding on Al 1050
2019
[29] Tribological studies of the sintered bronze—tungsten disulfide composites
2019
[30] Effects of Waste Eggshells addition on Microstructures, Mechanical and Tribological Properties of Green Metal Matrix Composite
2019
[31] Theoretical analysis and experimental investigation of contact fatigue and surface damage in prealloyed and diffusion bonded sintered steels
2018
[32] Study on the densification behavior of aluminum powders using microwave hot pressing process
The International Journal of Advanced Manufacturing Technology, 2018
[33] Study on the densification behavior of aluminum powders using microwave hot pressing process.
2018
[34] Ni-base superalloy powder-processed porous layer for gas cooling in extreme environments
Powder Metallurgy, 2016
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top