"Recent Trends in Producing Ultrafine Grained Steels"
written by Hossam Halfa,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Residual stress, phase, microstructure and mechanical property studies of ultrafine bainitic steel through laser shock peening
2019
[2] Increasing phase transformation rate in advanced high strength steel applications
2019
[3] Failure of Locking Wires of an Aeroengine Component: Attributed Primarily to Over-twisting and Secondarily to Engine Vibration and Improper Material Selection
2019
[4] Isothermal Recrystallization Behavior of Cold-Deformed Martensite in an Ultra-Low-Carbon Microalloyed Steel
International Journal of ISSI, 2019
[5] Process control maps to design an ultra-high strength-ductile steel
2019
[6] Microstructural evolution and strengthening of selective laser melted 316L stainless steel processed by high-pressure torsion
2019
[7] Improvement of fracture toughness of Ti+ Nb stabilized microalloyed and interstitial free steels processed through single phase regime control multiaxial forging
2019
[8] Numerical Investigations on Residual Stress in Laser Penetration Welding Process of Ultrafine-Grained Steel
2018
[9] Developing High Strength-High Toughness Low Carbon Steel Using Combined V-Ti-Micro-Alloying and Different Thermo-Mechanical Treatments
Key Engineering Materials, 2018
[10] Study for Combined Wire+ Powder Laser Metal Deposition of H11 and Niobium
Procedia Manufacturing, 2018
[11] Current challenges in material choice for high-performance engine crankshaft
Procedia Structural Integrity, 2018
[12] Effect of niobium on microstructure-property relationship in H11 hot-work tool steel via wire-and powder-based laser metal deposition
International Journal of Mechatronics and Manufacturing Systems, 2018
[13] Residual Stress, Phase, Microstructure and Mechanical Property Enhancement of Ultrafine Bainitic Steel through Laser Shock Processing
2018
[14] Improvement of Strength-Toughness-Hardness Balance in Large Cross-Section 718H Pre-Hardened Mold Steel
Materials, 2018
[15] Design Optimization of Microalloyed Steels Using Thermodynamics Principles and Neural-Network-Based Modeling
Metallurgical and Materials Transactions A, 2018
[16] Microstructure and mechanical property improvement of X70 in asymmetrical thermomechanical rolling
The International Journal of Advanced Manufacturing Technology, 2018
[17] A Review on Nano-Scale Precipitation in Steels
Technologies, 2018
[18] Microstructure and Impact Toughness of Offshore Steel
Archives of Metallurgy and Materials, 2018
[19] Factors controlling ambient and high temperature yield strength of ferritic stainless steel susceptible to intermetallic phase formation
Materials Science and Engineering: A, 2018
[20] Risks, Toxicity, and Challenges of Nanomaterials
2017
[21] Simultaneous Investigation of the Effect of Advanced Thermomechanical Treatment and Repetitive Cyclic Voltammetry on the Electrochemical Behavior of AISI 430 …
Journal of Materials Engineering and Performance, 2017
[22] OBTAINING HIGH-STRENGTH STATE OF HIGH-CARBON STEEL SHKH15 IN CASE OF SEVERE PLASTIC DEFORMATION
2017
[23] Experimental study of the relation between hardness and grain size of various nanocrystalline iron alloys
2017
[24] MODELLING AND SIMULATION OF ECAP AND P-ECAP TECHNIQUES OF GRAIN INDUCEMENT IN MILD STEEL
2017
[25] Simultaneous Investigation of the Effect of Advanced Thermomechanical Treatment and Repetitive Cyclic Voltammetry on the Electrochemical Behavior of AISI 430 Ferritic Stainless Steel
Journal of Materials Engineering and Performance, 2017
[26] Electrochemical Behavior of Pure Copper in Phosphate Buffer Solutions: A Comparison Between Micro-and Nano-Grained Copper.
2016
[27] 1500MPa 级冷轧马氏体钢板的弯曲性能和韧性研究
宝钢技术, 2016
[28] On the study of tensile and strain hardening behavior of a thermomechanically treated ferritic stainless steel
Materials Science and Engineering: A, 2016
[29] The influence of cyclic voltammetry passivation on the electrochemical behavior of fine and coarse-grained AISI 430 ferritic stainless steel in an alkaline solution
Journal of Alloys and Compounds, 2016
[30] Strengthening Mechanisms and Electrochemical Behavior of Ultrafine-Grained Commercial Pure Copper Fabricated by Accumulative Roll Bonding
Metallurgical and Materials Transactions A, 2016
[31] Influence of grain refinement on the electrochemical behavior of AISI 430 ferritic stainless steel in an alkaline solution
Applied Surface Science, 2016
[32] Effect of critical temperatures on microstructures and mechanical properties of Nb–Ti stabilized IF steel processed by multiaxial forging
Materials & Design, 2016
[33] Structural characterization of ultrafine-grained interstitial-free steel prepared by severe plastic deformation
Acta Materialia, 2016
[34] Study on the bendability and toughness of a 1 500 MPa cold-rolled martensitic sheet steel
Baosteel Technical Research, 2016
[35] MV Karavaeva, SK Kiseleva, AV Ganeev, EO Protasova, MM Ganiev, LA Simonova &
2015
[36] Electrochemical Behavior of Pure Copper in Phosphate Buffer Solutions: A Comparison Between Micro-and Nano-Grained Copper
Journal of Materials Engineering and Performance, 2015
[37] Comparison of electrochemical behavior between coarse-grained and fine-grained AISI 430 ferritic stainless steel by Mott–Schottky analysis and EIS measurements
Journal of Alloys and Compounds, 2015
[38] Effect of tempering temperature on the microstructure and mechanical properties in mooring chain steel
Materials Science and Engineering: A, 2015
[39] Superior strength of carbon steel with an ultrafine-grained microstructure and its enhanced thermal stability
Journal of Materials Science, 2015
[40] Nucleation and growth of carbo-nitride nanoparticles in α-Fe based-alloys and associated interfacial process
Nanotechnology Reviews, 2015
[41] Nucleation and growth of carbo-nitride nanoparticles in α-Fe-based alloys and associated interfacial process
Nanotechnology Reviews, 2015
[42] Studium jemnozrnných materiálů připravovaných metodou intenzivní plastické deformace
2015
[43] Recrystallization of ferrite and austenite
2014
[44] ОСОБЕННОСТИ ФОРМИРОВАНИЯ СЕГРЕГАЦИЙ И КАРБИДОВ ЖЕЛЕЗА НА ГРАНИЦАХ ЗЕРЕН И МЕХАНИЗМЫ УПРОЧЕНИЯ В …