"Elevated Temperatures Tensile Characteristics of Cast A356/Al2O3 Nanocomposites Fabricated Using a Combination of Rheocasting and Squeeze Casting Techniques"
written by El-Sayed Youssef El-Kady, Tamer Samir Mahmoud, Mohamed Abdel-Aziz Sayed,
published by Materials Sciences and Applications, Vol.2 No.5, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Strength-ductility trade-off via SiC nanoparticle dispersion in A356 aluminium matrix
2020
[2] High Temperature Tensile and Strain Hardening Behaviour of AA5052/9 vol.% ZrB2 insitu Composite
2018
[3] Effect of transition metals on energy absorption during strain-controlled fatigue of an aluminum alloy
International Journal of Fatigue, 2016
[4] Synthesis of Aluminum–Aluminum Nitride Nanocomposites by a Gas–Liquid Reaction II. Microstructure and Mechanical Properties
Metallurgical and Materials Transactions A, 2016
[5] Caracterização microestrutural e mecânica da liga 354.0 com adições de cério e zircônio
2016
[6] Development of Metal Matrix Nanocomposites of AA6061–SiCp Using Ultrasonic Cavitations in Squeeze Casting Process
ASME 2015 International Mechanical Engineering Congress and Exposition, 2015
[7] Improving High-Temperature Tensile and Low-Cycle Fatigue Behavior of Al-Si-Cu-Mg Alloys Through Micro-additions of Ti, V, and Zr
Metallurgical and Materials Transactions A, 2015
[8] Effect of Hot Deformation on the Wear Behavior of Al2O3/A356 Nano-Composites
Modern Applied Science, 2015
[9] Effect of Hot Deformation on the Wear Behavior of Al^ sub 2^ O^ sub 3^/A356 Nano-Composites
Modern Applied Science, 2015
[10] Development and Evaluation of Mechanical Properties of Al/Ilmenite Nanocomposite
2015
[11] Development and Evaluation of Mechanical Properties of Al/Ilmenite Nanocomposite.
Applied Mechanics & Materials, 2014
[12] Effect of T6 Heat Treatment in the Microstructure and Mechanical Properties of A356 Reinforced with Nano Al< sub> 2 O< sub> 3 Particles by Combination Effect of Stir and Squeeze Casting
Procedia Materials Science, 2014
[13] Microstructure and Mechanical Properties of MWCNTs Reinforced A356 Aluminum Alloys Cast Nanocomposites Fabricated by Using a Combination of Rheocasting and Squeeze Casting Techniques
Journal of Nanomaterials, 2014
[14] IMPROVE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AL-A332–ALLOY REINFORCED AL2O3 MICRO AND NANO COMPOSITES FABRICATED BY STIR CASTING
Journal of Duhok University, 2014
[15] Microstructure and mechanical properties of MWCNTs reinforced A356 aluminum alloys cast nanocomposites fabricated by using a combination of rheocasting and …
Journal of Nanomaterials, 2014
[16] Effect of T6 heat treatment in the microstructure and mechanical properties of A356 reinforced with nano Al2O3 particles by combination effect of stir and squeeze …
Procedia Materials Science, 2014
[17] Machinability of A356/Al
2013
[18] Machinability of A356/Al2O3 cast aluminum metal matrix nanocomposites (MMCs)
2013
[19] Semi-solid high pressure die casting of metal matrix composites produced by liquid state processing
Solid State Phenomena, 2013
[20] Wear behaviour of A356 aluminium alloy reinforced with micron and nano size SiC particles
Materials Science Forum, 2013
[21] Processing Methods for Aluminum Nanocomposite Materials
2013
[22] Dynamic Behaviour of Cast A356/Al2O3 Aluminum Metal Matrix Nanocomposites
Materials Sciences and Applications, 2012
[23] Dynamic Behaviour of Cast A356/Al 2 O 3 Aluminum Metal Matrix Nanocomposites
2012
[24] МЕХАНИЧЕСКИЕ СВОЙСТВА МАТЕРИАЛОВ НА ОСНОВЕ АЛЮМИНИЯ, ДИСПЕРСНО-УПРОЧНЕННЫХ НАНОРАЗМЕРНЫМИ ЧАСТИЦАМИ Al2O3