Optimizing the Glass Fiber Cutting Process Using the Taguchi Methods and Grey Relational Analysis

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

New Journal of Glass and Ceramics

ISSN Print: 2161-7554
ISSN Online: 2161-7562
www.scirp.org/journal/njgc
E-mail: njgc@scirp.org

Google-based Impact Factor: 0.73
Citations h5-index & Ranking*

Journals Menu

"Optimizing the Glass Fiber Cutting Process Using the Taguchi Methods and Grey Relational Analysis"
written by Chao-Lieh Yang,
published by New Journal of Glass and Ceramics, Vol.1 No.1, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	A Multi-Criteria Approach to Maintenance Performance Assessment in a Manufacturing System
	Engineering Access, 2022

[2]	Effect of nano filler addition on carbon reinforced polymer composite
	Materials Today …, 2022

[3]	Optimization of tribological property of carbon fiber reinforced nano filler filled polymer composites using Taguchi method
	2020

[4]	Kinematic features of the lapping process and determination of its basic parameters
	2020

[5]	Grey relational evaluation of impact and control of malaria in Sub-Saharan Africa
	2019

[6]	Application of Artificial Neural Network: A Case Study of Biomedical Alloy
	2019

[7]	OPTIMIZATION OF VARIOUS DRILLING MACHINE PARAMETERS USING GREY RELATION METHOD AND ANOVA APPROACH
	2017

[8]	INVESTIGATION ON RADIAL DRILLING MACHINE FOR VARIOUS PARAMETERS USING GREY RELATIONAL METHOD
	International Journal of Research In Science & Engineering, 2017

[9]	Experimental and Statistical Parametric Optimisation of Surface Roughness and Machining Productivity by Lapping
	Transactions of FAMENA, 2016

[10]	菱形驅動 β 型史特靈引擎之多目標最佳化設計—灰色田口法之應用
	臺灣逢甲大學學位論文, 2016

[11]	Modeling and multiresponse optimization of the mechanical properties of Roselle fiber-reinforced vinyl ester composite
	Polymer-Plastics Technology and Engineering, 2015

[12]	MULTI OBJECTIVE OPTIMIZATION OF MACHINING PARAMETERS DURING TURNING OF E 250 B0OF STANDARD IS: 2062 MATERIALUSING GREY …
	2015

[13]	MULTI OBJECTIVE OPTIMIZATION OF MACHINING PARAMETERS DURING TURNING OF E 250 B0OF STANDARD IS: 2062 MATERIALUSING GREY …
	2015

[14]	Multi Optimization in Wet Turning Process Using Taguchi Based Grey Relation Analysis
	Proceeding of the 5th National Conference on Recent Advances in Manufacturing (RAM 2015) SVNIT, 2015

[15]	Multi objective optimization of machining parameters during turning of E 250 B0 of standard IS: 2062 materialusing grey relation analysis
	International Journal of Advanced Research in Management and Social Sciences, 2015

[16]	Multi-response Optimization in Machining of GFRP (Epoxy) Composites: An Integrated Approach
	Journal for Manufacturing Science and Production, 2015

[17]	MULTI OPTIMIZATION OF PROCESS PARAMETERS BY USING GREY RELATION ANALYSIS-A REVIEW
	2015

[18]	Optimization of multi-tool machining processes with simultaneous action
	The International Journal of Advanced Manufacturing Technology, 2015

[19]	Modeling and Multi-Response Optimization of the Mechanical Properties of Roselle Fiber-Reinforced Vinyl Ester Composite
	Polymer-Plastics Technology and Engineering, 2015

[20]	MULTI OBJECTIVE OPTIMIZATION OF MACHINING PARAMETERS DURING TURNING OF E 250 B0OF STANDARD IS: 2062 MATERIALUSING GREY RELATION ANALYSIS
	International Journal of Advanced Research in Engineering and Applied Sciences , 2015

[21]	Taguchi method for optimization of fabrication parameters with mechanical properties in sisal fibre–vinyl ester composites
	Australian Journal of Mechanical Engineering, 2015

[22]	Taguchi method for optimization of fabrication parameters with mechanical properties in fiber and particulate reinforced composites
	International Journal of Plastics Technology, 2015

[23]	Optimization of Machinability Parameters of Al6061 using Taguchi
	International Journal of Current Engineering and Technology, 2014

[24]	Improving the Quality of Surfaces Finished by Lapping by Robust Parameter Design
	Journal of Economics, Business and Management, 2014

[25]	Optimisation of machining parameters by criterion of maximum productivity
	International Journal of Production Research, 2014

[26]	Current Research Trend in Wire EDM: An Overview
	YMCAUST International Journal of Research, 2013

[27]	TAGUCHI METHOD FOR IMPROVING POWDER COATING PROCESS–A CASE STUDY
	BEST: International Journal of Management, InformationTechnology and Engineering, 2013

[28]	Prediction of cutting forces in machining of unidirectional glass fiber reinforced plastics composite
	Frontiers of Mechanical Engineering, 2013

[29]	Grey-based Taguchi approach for wear assessment of SiC filled carbon–epoxy composites
	Materials & Design, 2012

[30]	Multiple Response Optimization of Three-Body Abrasive Wear Behaviour of Graphite Filled Carbon-Epoxy Composites Using Grey-Based Taguchi Approach
	Journal of Minerals and Materials Characterization and Engineering, 2012

[1]	Optimization of the face milling operations by the criterion of the maximal productivity rate Production Engineering, 2024 DOI:10.1007/s11740-023-01249-9

[2]	Effect of nano filler addition on carbon reinforced polymer composite Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2021.12.320

[3]	Optimization of tribological property of carbon fiber reinforced nano filler filled polymer composites using Taguchi method PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS RESEARCH (ICAMR - 2019), 2020 DOI:10.1063/5.0023102

[4]	Grey relational evaluation of impact and control of malaria in Sub-Saharan Africa Grey Systems: Theory and Application, 2019 DOI:10.1108/GS-06-2019-0020

[5]	Taguchi method for optimization of fabrication parameters with mechanical properties in sisal fibre–vinyl ester composites Australian Journal of Mechanical Engineering, 2017 DOI:10.1080/14484846.2015.1093258

[6]	Multi-Response Optimization of EDM for Ti-6Al-4V Using Taguchi - Grey Relational Analysis Solid State Phenomena, 2017 DOI:10.4028/www.scientific.net/SSP.266.43

[7]	Optimization of multi-tool machining processes with simultaneous action The International Journal of Advanced Manufacturing Technology, 2016 DOI:10.1007/s00170-015-6920-x

[8]	Taguchi method for optimization of fabrication parameters with mechanical properties in fiber and particulate reinforced composites International Journal of Plastics Technology, 2015 DOI:10.1007/s12588-015-9128-x

[9]	Modeling and Multiresponse Optimization of the Mechanical Properties of Roselle Fiber-Reinforced Vinyl Ester Composite Polymer-Plastics Technology and Engineering, 2015 DOI:10.1080/03602559.2015.1036438

[10]	Multi-response Optimization in Machining of GFRP (Epoxy) Composites: An Integrated Approach Journal for Manufacturing Science and Production, 2015 DOI:10.1515/jmsp-2014-0054

[11]	Prediction of cutting forces in machining of unidirectional glass fiber reinforced plastics composite Frontiers of Mechanical Engineering, 2013 DOI:10.1007/s11465-013-0262-x

[12]	Grey-based Taguchi approach for wear assessment of SiC filled carbon–epoxy composites Materials & Design, 2012 DOI:10.1016/j.matdes.2012.04.051

[13]	Multiple Response Optimization of Three-Body Abrasive Wear Behaviour of Graphite Filled Carbon-Epoxy ComPosites Using Grey-Based Taguchi Approach Journal of Minerals and Materials Characterization and Engineering, 2012 DOI:10.4236/jmmce.2012.119082

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

New Journal of Glass and Ceramics

New Journal of Glass and Ceramics

Journals Menu

Home

About SCIRP

Service

Policies