Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Microstructure and Mechanical Properties of as Cast Aluminium Alloy 7075/Basalt Dispersed Metal Matrix Composites"
written by S. Ezhil Vannan, S. Paul Vizhian,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Sliding Wear Behavior of Particulate Reinforced Aluminium Metal Matrix Composites
2020
[2] Influence of B 4 C Reinforcement Particles with Varying Sizes on the Tensile Failure and Fractography of LM29 Alloy Composites
2020
[3] Experimental investigation of the effect of processing parameters on densification, microstructure and hardness of selective laser melted 7075 aluminium alloy
2020
[4] Characterization and mechanical response of novel Al-(Mg–TiFe–SiC) metal matrix composites developed by stir casting technique
2019
[5] Basalt fibre reinforced aluminium matrix composites–A review
2019
[6] EFFECT OF THE REINFORCEMENT PARTICLE SIZE ON THE COMPRESSIVE STRENGTH AND IMPACT TOUGHNESS OF LM29 ALLOY-B4C COMPOSITES
STRUCTURAL INTEGRITY AND LIFE, 2019
[7] Study on Effect of Heat Treatment on Mechanical Properties of AA7075-MWCNT Composite
2019
[8] Micro-structural Analysis and Densification Behavior of Al–ZrB2 Powder Metallurgy Composite During Upsetting
Transactions of the Indian Institute of Metals, 2018
[9] Strain Hardening Behaviour and Its Effect on Properties of ZrB2 Reinforced Al Composite Prepared by Powder Metallurgy Technique
Journal of The Institution of Engineers (India): Series D, 2018
[10] Effect of deformation on properties of Al/Al-alloy ZrB2 powder metallurgy composite
Journal of Alloys and Compounds, 2018
[11] Towards More Sustainable Material Formulations: A Comparative Assessment of PA11-SGW Flexural Performance versus Oil-Based Composites
Polymers, 2018
[12] Mold Modeling and Optimization of Metallic Tension Bar in AA 7075 Aluminium Alloy Casting
Mechanics, 2018
[13] Experimental studies of mechanical properties and tribological behaviour of aluminium composite reinforced with coconut shell ash particulates
International Journal of Materials Engineering Innovation, 2018
[14] Mold Modeling of Metallic Tension Bar in AA 7075 Aluminium Alloy Casting.
Mechanika, 2018
[15] Review on wear characteristics of aluminum silicon carbide reinforced with basalt fibre
2018
[16] Transparent Glazes with Basalt Addition
19th International Metallurgy & Materials Congress, 2018
[17] Mechanical Behaviour of Aluminium Alloy Reinforced With SiC/Fly Ash/Basalt Composite for Brake Rotor
Polymers and Polymer Composites, 2017
[18] Dry Sliding Wear Behavior of AA 7075 Reinforced Short Coated Carbon Metal Matrix Composites
2017
[19] The effect of palm kernel shell ash on the mechanical properties of as-cast aluminium alloy matrix composites
2016
[20] Enhanced Mechanical Properties of Al-6061 Metal Matrix Composites Reinforced with α-Al2O3 Nanoceramics
2016
[21] Experimental investigations on mechanical behavior of aluminium metal matrix composites
IOP Conference Series: Materials Science and Engineering, 2016
[22] Stiffness of bio-based polyamide 11 reinforced with softwood stone ground-wood fibres as an alternative to polypropylene-glass fibre composites
European Polymer Journal, 2016
[23] Corrosion Characteristics of Basalt Short Fiber Reinforced with Al-7075 Metal Matrix Composites.
2015
[24] 玄武岩短纤维/硅橡胶/氟橡胶复合材料制备及表征
弹性体, 2015
[25] Corrosion Characteristics of Basalt Short Fiber Reinforced with Al-7075 Metal Matrix Composites
JJMIE, 2015
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top