|
[1]
|
Simultaneous effects of cutting depth and tool overhang on the vibration behavior of cutting tool and high-cycle fatigue behavior of product: experimental research on …
|
|
… International Journal of …,
2022 |
|
|
|
|
[2]
|
DEVELOPMENT AND ANALYSIS OF SURFACE ROUGHNESS MODEL IN DRY LONGITUDINAL TURNING OF C45E STEEL
|
|
Innovative Mechanical …,
2022 |
|
|
|
|
[3]
|
Cyber-Physical Quality Systems in Manufacturing
|
|
2021 |
|
|
|
|
[4]
|
Development of Surface Roughness Model in Turning Process of 3X13 Steel Using TiAIN Coated Carbide Insert
|
|
EUREKA: Physics and Engineering,(4),
2021 |
|
|
|
|
[5]
|
Experiment study on damping characteristics of the turning tool holder materials
|
|
2021 |
|
|
|
|
[6]
|
Analysis of Effects of Machining Parameters on Cutting Force Components in Turning AISI 201 Stainless Steel Using Cemented Carbide Cutting Tool Insert
|
|
2021 |
|
|
|
|
[7]
|
Numerical study of free vibration behaviour of filled tool holder using epoxy-granite
|
|
2020 |
|
|
|
|
[8]
|
Analysing Of Cutting Parameters by Turning Operation for Incole Material Using Mini Tab
|
|
2018 |
|
|
|
|
[9]
|
Effect Of Cutting Parameters On Surface Roughness And Cutting Tool Temperature In Turning AISI 1045 Steel
|
|
2017 |
|
|
|
|
[10]
|
OPTIMIZATION OF PROCESS PARAMETERS TO MINIMISE SURFACE ROUGHNESS IN TURNED PARTS BY EXPERIMENTATION AND ANALYTICAL
|
|
International Journal of Creative Research Thoughts (IJCRT),
2017 |
|
|
|
|
[11]
|
An Alternative Approach for Assessing the Impact of Cutting Conditions on Surface Roughness Using Single Decision Tree
|
|
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering,
2017 |
|
|
|
|
[12]
|
Modeling and Optimization of Hard Turning Operation on 41Cr4 Alloy Steel Using Response Surface Methodology
|
|
International Journal of Mechanical Engineering and Applications,
2016 |
|
|
|
|
[13]
|
Modeling and Optimization of Surface roughness and Machining Induced Vibration in 41cr4 Alloy Structural Steel Turning Operation Using Design of Experiment
|
|
The International Journal Of Engineering And Science (IJES),
2016 |
|
|
|
|
[14]
|
Effect of Tool holder over hang & Feed on Surface roughness in Turning application–an experimental approach
|
|
International Journal of Scientific & Engineering Research,
2016 |
|
|
|
|
[15]
|
Effect of Machining Process in Superfinish Turning on the Corrosion Behavior of UNS S31600 Stainless Steel in 6% NaCl Solution
|
|
2016 |
|
|
|
|
[16]
|
Modeling and Optimization of Surface roughness and Machining Induced Vibration in 41cr4 Alloy Structural Steel Turning Operation Using Design of Experiment
|
|
The International Journal Of Engineering And Science (IJES),
2016 |
|
|
|
|
[17]
|
An Investigation on Effect of Depth of Cut, Feed Rate and Tool Nose Radius on Induced vibration and Surface Roughness During hard Turning of 41Cr4 Alloy …
|
|
2016 |
|
|
|
|
[18]
|
A Study on the Effect of Depth of Cut, Feed Rate and Tool Overhang on the Induced Vibration and Surface Roughness During Hard Turning of 41Cr4 Alloy Steel Using Response Surface Methodology[J]. Inter
|
|
Journal of Emerging Technology and Advanced Engineering,
2016 |
|
|
|
|
[19]
|
The effects of process parameters on acceleration amplitude in the drilling of cold work tool steels
|
|
The International Journal of Advanced Manufacturing Technology,
2015 |
|
|
|
|
[20]
|
Optimization of Metal Removal Rate for 6061 Aluminium in Turning Operation Using ANOVA, Taguchi and Fuzzy Logic
|
|
International Journal of Research,
2015 |
|
|
|
|
[21]
|
The effects of process parameters on acceleration amplitude in the drilling of cold work tool steels.
|
|
International Journal of Advanced Manufacturing Technology,
2015 |
|
|
|