Modeling and Numerical Simulation of Material Science

Modeling and Numerical Simulation of Material Science

ISSN Print: 2164-5345
ISSN Online: 2164-5353
www.scirp.org/journal/mnsms
E-mail: mnsms@scirp.org
"A Solute Pinning Approach to Solute Drag in Multi-Component Solid Solution Alloys"
written by Emmanuel Hersent, Knut Marthinsen, Erik Nes,
published by Modeling and Numerical Simulation of Material Science, Vol.4 No.1, 2014
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] The Effect of Zn Incorporation on the Structure and Mechanical Properties of the Al–Zn Alloy System
Transactions of the Indian Institute of …, 2022
[2] Effect of heat treatment on the FeCoCrNiMnAl high-entropy alloy cladding layer
Surface Engineering, 2021
[3] Solute drag forces from equilibrium interface fluctuations
2020
[4] Modeling of static recrystallization in complexly alloyed austenite
2020
[5] A Growth Kinetics Study and Simulation for Recrystallized Ferrite Grains under the Annealing of Automotive Steel Cold-Rolled Sheets
2019
[6] Исследование и моделирование кинетики роста рекристаллизованного зерна феррита при отжиге холоднокатаных листов из автомобильных сталей
2019
[7] A comparison study of dislocation density, recrystallization and grain growth among nickel, FeNiCo ternary alloy and FeNiCoCrMn high entropy alloy
2019
[8] Modeling of grain growth kinetics in complexly alloyed austenite
2019
[9] Strategies for Producing Bulk Nanocrystalline Al-Mg Alloys by Cryogenic Milling and SPS Consolidation
2018
[10] Effect of oxygen content on thermal stability of grain size for nanocrystalline Fe10Cr and Fe14Cr4Hf alloy powders
Journal of Alloys and Compounds, 2017
[11] Drag Effects of Solute and Second Phase Distributions on the Grain Growth Kinetics of Pre-Extruded Mg-6Zn Alloy
Journal of Materials Science & Technology, 2016
[12] On the Effect of Atoms in Solid Solution on Grain Growth Kinetics
Metallurgical and Materials Transactions A?, 2014
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top