Liquid Column Deformation and Particle Size Distribution in Gas Atomization

Journals Menu

Follow SCIRP

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

"Liquid Column Deformation and Particle Size Distribution in Gas Atomization"
written by Georgios S. E. Antipas,
published by Materials Sciences and Applications, Vol.2 No.2, 2011

has been cited by the following article(s):

[1]	Characteristics of 7055Al alloy powders manufactured by gas-solid two-phase atomization: A comparison with gas atomization process
	Materials & Design, 2017

[2]	雷射積層製造用鐵基金屬玻璃粉末與其工件性質之研究
	2017

[3]	雷射積層製造用鐵基金屬玻璃粉末與其工件性質之研究; Fe-based metallic glass powder preparation and additive manufacturing workpiece properties analysis
	2017

[4]	Analysis of the influence of the gas velocity, particle size and nucleation temperature on the thermal history and microstructure development in the tool steel during …
	Journal of Alloys and Compounds, 2014

[5]	Plasma-spray synthesis and characterization of ti-based nitride and oxide nanogranules
	Materials Research, 2014

[6]	Analysis of the influence of the gas velocity, particle size and nucleation temperature on the thermal history and microstructure development in the tool steel during atomization
	Journal of Alloys and Compounds, 2014

[7]	Effect of the heat curing on strength development of self-compacting mortars containing calcined silt of dams and Ground Brick Waste
	Materials Research, 2013

[8]	Semi-quantitative model of the microstructure development in the high-alloyed iron based alloy during atomization
	Materials Research, 2012

[9]	BEP Report

Follow SCIRP