Cracking Phenomenon in Spot Welded Joints of Austenitic Stainless Steel

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

"Cracking Phenomenon in Spot Welded Joints of Austenitic Stainless Steel"
written by Ahmed M. Al-Mukhtar, Qasim M. Doos,
published by Materials Sciences and Applications, Vol.4 No.10, 2013

has been cited by the following article(s):

[1]	Investigate of the influence for multiple resistance welding currents in austerities nickel-chromium alloys on welded joints mechanical characteristics
	2020

[2]	Aircraft Fuselage Cracking and Simulation
	2020

[3]	Case Studies of Aircraft Fuselage Cracking
	2019

[4]	A Review on Resistance Spot Welding of Steel Material
	International Journal of Scientific Research and Engineering Development, 2019

[5]	Resistance spot welding of dissimilar alloys 1008 low carbon steel-5052 aluminum alloy
	2018

[6]	New Method of Resistance Spot Welding for Dissimilar 1008 Low Carbon Steel-5052 Aluminum Alloy
	Procedia Structural Integrity, 2018

[7]	Spot Welding Joint's Fracture Behavior and Fundamental
	Proceedings of the 7th International Conference on Fracture Fatigue and Wear, 2018

[8]	Effect of Heat Treatments on 302 Austenitic Stainless Steel Spot Weld
	Advanced Engineering Forum, 2018

[9]	Failure Mechanisms and Modeling of Spot Welded Joints in Low Carbon Mild Sheets Steel and High Strength Low Alloy Steel
	2018

[10]	A study on the fatigue life of spot welding under multi-axial loading conditions
	Advance in Structural Engineering Mechanlcs(ASE17), 2017

[11]	Review of Resistance Spot Welding Sheets: Processes and Failure Mode
	Advanced Engineering Forum, 2016

[12]	Mechanical Properties Investigation of Multi-Lap Stainless Steel Sheets
	Journal of Materials Science Research, 2015

[1]	Comparative Study of the Mechanical Properties of Spot Welded Joints Materials Science Forum, 2022 DOI:10.4028/p-488xsr

[2]	Case Studies of Aircraft Fuselage Cracking Advanced Engineering Forum, 2019 DOI:10.4028/www.scientific.net/AEF.33.11

[3]	New Method of Resistance Spot Welding for Dissimilar 1008 Low Carbon Steel-5052 Aluminum Alloy Procedia Structural Integrity, 2018 DOI:10.1016/j.prostr.2018.06.008

[4]	Failure Mechanisms and Modeling of Spot Welded Joints in Low Carbon Mild Sheets Steel and High Strength Low Alloy Steel Procedia Structural Integrity, 2018 DOI:10.1016/j.prostr.2018.06.013

[5]	Effect of Heat Treatments on 302 Austenitic Stainless Steel Spot Weld Advanced Engineering Forum, 2018 DOI:10.4028/www.scientific.net/AEF.29.19