Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite"
written by Belete Sirahbizu Yigezu, Manas Mohan Mahapatra, Pradeep Kumar Jha,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.4, 2013
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Studies on micro structural characteristics, mechanical and tribological behaviours of boron carbide and cow dung ash reinforced aluminium (Al 7075) hybrid metal …
2020
[2] Influence of dual reinforcement (nano CuO+ reused spent alumina catalyst) on microstructure and mechanical properties of aluminium metal matrix composite
2020
[3] Investigations on properties of Mg-Al2O3 composites fabricated via stir casting route
2020
[4] Experimental analysis and mechanical characterization of Al 6061/alumina/bagasse ash hybrid reinforced metal matrix composite using vacuum-assisted stir casting …
2020
[5] SiC Reinforcement in the Synthesis and Characterization of A356/AL 2 O 3/Sic/Gr Reinforced Composite-Paving a Way for the Next Generation of Aircraft Applications
2020
[6] Multifactor optimization for development of hybrid aluminium matrix composites
2020
[7] Mechanical characterization of al7050 metal matrix composite reinforced with b4c by electromagnetic stir casting method
2020
[8] Microstructure, Hardness and Chip Formation of an Aluminum Alloy Metal Matrix Composite Fabricated by Squeeze Casting Method
2020
[9] Characterization and Mechanical Properties of 2024/Y2O3 Composite Developed by Stir Rheocasting
2020
[10] Mechanical and tribological behaviours of aluminium hybrid composites reinforced by CDA-B4C
2020
[11] Microstructure and Mechanical Characteristics of CDA–B 4 C Hybrid Metal Matrix Composites
2019
[12] Microstructure and Mechanical Characteristics of CDA–B4C Hybrid Metal Matrix Composites
2019
[13] Microstructure characterization and evaluation of mechanical properties of stir rheocast AA2024/TiB2 composite
2019
[14] Computational Fluid Dynamics Simulation on Particulate Distribution in Gyro Casting for the Manufacture of Al/SiC Particulate Metal Matrix Composite
2019
[15] Recent progress in production of metal matrix composites by stir casting process: An overview
2019
[16] Compression and Diametral Tensile Strength Analysis of Graphene–Al2O3 Reinforced AA 2024 and AA 2219 Hybrid Nanocomposites
2019
[17] Compression and Diametral Tensile Strength Reinforced Analysis AA 2024 of and Graphene–Al
2019
[18] Development of AA2024/TiB 2+ Y 2 O 3 Hybrid Composites with Improved Mechanical Properties Through Stir Rheocasting
2019
[19] Processing and characterization of AA2024/Al2O3/SiC reinforces hybrid composites using squeeze casting technique
2019
[20] Effects of Silicon Carbide and Tungsten Carbide in Aluminium Metal Matrix Composites
2019
[21] Study on properties and selection of metal matrix and reinforcement material for composites
2019
[22] Production of aluminum alloy-based metal matrix composites using scrap aluminum alloy and waste materials: Influence on microstructure and mechanical properties
2019
[23] Investigations for Surface Hardness of Aluminum Matrix Composites with Hybrid Reinforcement
2019
[24] A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites
2019
[25] A review on the production of metal matrix composites through stir casting–Furnace design, properties, challenges, and research opportunities
2019
[26] Effect of ceramic reinforcement on the microstructural, mechanical and tribological behavior of Al-Cu alloy metal matrix composite
2019
[27] A Survey on Effect of Agro Waste Ash as Reinforcement on Aluminium Base Metal Matrix Composites
2019
[28] Processing and Characterization of AA2024/Al 2 O 3/SiC Reinforces Hybrid Composites Using Squeeze Casting Technique
2019
[29] SUPERIOR MATERIAL PROPERTIES OF HYBRID FILLER-REINFORCED ALUMINUM MMC THROUGH DOUBLE-LAYER FEEDING TECHNIQUE ADOPTED IN …
2018
[30] An Investigation on the Mechanical Properties of Nano-Al2O3 and TiC Reinforced Aluminum Matrix Hybrid Composites
Journal of Advanced Microscopy Research, 2018
[31] Studies on Mechanical and Abrasive Wear Properties of Cu-Ni-Si/Si3N4 Functionally Graded Composite
Silicon, 2018
[32] Heat Treating Studies of Graphene Reinforced Aluminium Metal Matrix Composite
Materials Today: Proceedings, 2018
[33] Fabrication of LM 25/WC functionally graded composite for automotive applications and investigation of its mechanical and wear properties
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018
[34] Experimental Investigation of Processes and Properties of Aluminium Matrix Composites
2018
[35] MECHANICAL AND TRIBOLOGICAL ENHANCEMENT OF AA6063 ALUMINUM ALLOY USING SOLID SPHERE FLY ASH PARTICLES REINFORCEMENT
2018
[36] Wear analysis by Taguchi technique of Al6061 based hybrid composite reinforced with SiC and Al2O3
2017
[37] A SIGNIFICANT REASSESS ON PERFORMANCE AND MACHINING OF METAL MATRIX COMPOSITES
2017
[38] Wear Characteristics of LM13 Alloy with Course Size of Rutile Reinforcement
2017
[39] Comparative study on the mechanical and microstructural characterization of AA 7075 nano and hybrid nanocomposites produced by stir and squeeze castin
journal of Advanced Research, 2017
[40] Ni-NiO Porous Preform with Controlled Porosity Using Al2O3 Powder
Materials Science Forum, 2017
[41] The Synthesis of Silicon Carbide in Rhombohedral Form with Different Chemicals
Metallurgical and Materials Transactions A, 2017
[42] Effect of different reinforcement on metal matrix
2017
[43] Archachatina marginata bio-shells as reinforcement material in metal matrix composites.
2017
[44] Evaluation of Wear and Corrosion Properties of AA6061/TiB2 Composites Produced by FSP Technique
2017
[45] A comparative study of structural and mechanical properties of Al–Cu composites prepared by vacuum and microwave sintering techniques
Journal of Materials Research and Technology, 2017
[46] Microstructure and mechanical properties of aluminium metal matrix composites with addition of bamboo leaf ash by stir casting method
Transactions of Nonferrous Metals Society of China, 2017
[47] FABRICATION AND CHARECTERISATION OF ALUMINUM-GRAPHITE COMPOSITE MATERIAL
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 2017
[48] Hardness and microstructure properties of AlCu-B4C/hBN hybrid composites
International Advanced Technologies Symposium, 2017
[49] Multi-objective optimization of laser curve cutting of aluminium metal matrix composites using desirability function approach
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2016
[50] Development of functionally graded aluminium composites using centrifugal casting and influence of reinforcements on mechanical and wear properties
Transactions of Nonferrous Metals Society of China, 2016
[51] The Mechanical Properties and Abrasive Wear Behavior of Functionally Graded Aluminum/AlB2 Composites Produced by Centrifugal Casting
Particulate Science and Technology, 2016
[52] Abrasive Wear Behaviour of Monolithic Alloy, Homogeneous and Functionally Graded Aluminium (LM25/AlN and LM25/SiO2) Composites
African Journal of Aquatic Science, 2016
[53] Investigation on Mechanical Properties and Analysis of Dry Sliding Wear Behavior of Al LM13/AlN Metal Matrix Composite based on Taguchi's Technique
2016
[54] A Cognitive Brand Positioning Exploration with Data Mining
Asian Journal of Research in Social Sciences and Humanities, 2016
[55] Microstructure and Hardness Studies of Magnesium-Aluminum Alloy and Fused Silica Particulate Composite
International Journal for Ignited Minds, 2016
[56] Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites
Science and Engineering of Composite Materials, 2016
[57] The experimental optimization of abrasive wear resistance model for an in-situ AlB2/Al-4Cu metal matrix composite
Industrial Lubrication and Tribology, 2016
[58] Study of Dispersoid Content and Chill Effect for Improved Mechanical Properties of Aluminum Alloy Composite
International Journal for Ignited Minds, 2016
[59] 离心铸造制备功能梯度铝基复合材料及增强相对其力学和磨损性能的影响
中国有色金属学报(英文版), 2016
[60] Investigations on Machining Characteristics of Metal Matrix Composites Using Abrasive Flow Machining
2016
[61] Persuade of Reinforcement on the Mechanical Properties and Scrutiny of Process Parameters of the New Hybrid Al7075 Composite Dispersed with B4C and SIC …
2016
[62] Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics
Journal of Materials Research and Technology, 2015
[63] Computational investigation on thermal conductivity behavior of Al 6061–SiC–Gr hybrid metal matrix composites
International Journal of Computational Materials Science and Engineering, 2015
[64] Investigating the quality characteristics of Al5052/SiC metal matrix composites machined by CO2 laser curve cutting
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 2015
[65] Preparation, Characterization and Machinability of Al7075-Al 2 O 3 Matrix Composite Using Multi Layer Coated Carbide Insert
Procedia Materials Science, 2014
[66] Fabrication, Surface Morphology and Corrosion Investigation of Al 7075-Al 2 O 3 Matrix Composite in Sea Water and Industrial Environment
Procedia Engineering, 2014
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top