International Journal of Nonferrous Metallurgy

International Journal of Nonferrous Metallurgy

ISSN Print: 2168-2054
ISSN Online: 2168-2062
www.scirp.org/journal/ijnm
E-mail: ijnm@scirp.org
"Microstructural Evolution in Cu-Mg Alloy Processed by Conform"
written by Lianpeng Song, Yuan Yuan, Zhimin Yin,
published by International Journal of Nonferrous Metallurgy, Vol.2 No.3, 2013
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] INFLUÊNCIA DA VELOCIDADE DE EXTRUSÃO NA HOMOGENEIDADE MICROESTRUTURAL DO PROCESSO DE CONFORMAÇÃO CONTÍNUA
[2] Regularities of Microstructure Evolution in a Cu-Cr-Zr Alloy during Severe Plastic Deformation
Materials, 2022
[3] Regularities of Microstructure Evolution in a Cu-Cr-Zr Alloy during Severe Plastic Deformation. Materials 2022, 15, 5745
2022
[4] Study of the Deformation during Turning of Brass Sheets on a Two-High Mill by Rolling Methods and Computer Simulation
Russian Metallurgy (Metally), 2021
[5] Investigation of the Stress-Strain State and Microstructure Transformation of Electrotechnical Copper Buses in the Deformation Zone during Continuous Extrusion
2021
[6] Исследование напряженно-деформированного состояния и трансформации микроструктуры медных электротехнических шин в очаге деформации при …
2021
[7] Исследование процесса деформирования методами прокатки и компьютерного моделирования при кантовке латунных листов на двухвалковом стане
2020
[8] ВЛИЯНИЕ ПАРАМЕТРОВ ПРОЦЕССА НЕПРЕРЫВНОГО ПРЕССОВАНИЯ НА ФОРМИРОВАНИЕ МИКРОСТРУКТУРЫ И МЕХАНИЧЕСКИЕ СВОЙСТВА …
2019
[9] On Solid-State Deposition of Metal Structures: Conceptualization of a New Additive Manufacturing Method based on Hybrid Metal Extrusion & Bonding
2019
[10] Investigating the Mechanics of Hybrid Metal Extrusion and Bonding Additive Manufacturing by FEA
2019
[11] Effect of Continuous Extrusion Parameters on Alloy M1 Round Section Bar Microstructure and Mechanical Property Formation
2019
[12] Generalised stacking fault energies of copper alloys: Density functional theory calculations
2019
[13] Исследование формирования микроструктуры сплава М1 в очаге деформации при непрерывном прессовании шин
2018
[14] Evolution of the Microstructure of the Copper Alloy (DIN-ECu-57) in the Deformation Zone in the Process of Pressing Conform
Materials Science Forum, 2018
[15] The Mechanics of the Continuous Rotary Extrusion Process Investigated by FEM analysis
2018
[16] INFLUENCE OF THE EXTRUSION SPEED ON THE MICROSTRUCTURAL HOMOGENEITY OF THE CONTINUOS FORMING PROCESS/INFLUÊNCIA DA …
2018
[17] Mechanical Properties of Steel DC01 Formed by Drece Method
2017
[18] Effect of Die Material and Hardness on the Productivity of Copper Strips via Hot Continuous Extrusion Process
2016
[19] Výběr vhodných materiálů pro zvýšení mechanických vlastností v pásu plechu na zařízení DRECE
2015
[20] Национальный исследовательский технологический университет «МИСиС», Москва, Россия. 2 ООО «Свелен», Санкт-Петербург, Россия.
С ДНЕМ МЕТАЛЛУРГА!, 1926
[21] INFLUÊNCIA DA GEOMETRIA DO FERRAMENTAL NAS PROPRIEDADES MECÂNICAS DE FIOS DE COBRE FABRICADAS PELO PROCESSO CONFORM
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top