Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"Experimental Investigation on the Effect of Reinforcement Particles on the Forgeability and the Mechanical Properties of Aluminum Metal Matrix Composites"
written by S. Das, R. Behera, A. Datta, G. Majumdar, B. Oraon, G. Sutradhar,
published by Materials Sciences and Applications, Vol.1 No.5, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] A Review of Wire Arc Additive Manufacturing (WAAM) of Aluminium Composite, Process, Classification, Advantages, Challenges, and Application
2021
[2] Metal Matrix Composites Synthesized by Laser-Melting Deposition: A Review
2020
[3] A novel approach for the production and characterisation of aluminium–alumina hybrid metal matrix composites
2020
[4] Wear behavior of Al 7075/Al2O3/SiC Hybrid NMMC's by Stir Casting Method
2020
[5] Workability, Densification and Failure Characteristics of Selective Heated Sintered Powder Metallurgy Preforms during Upsetting
2020
[6] Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method
2019
[7] Influence of warm temperature (0.3-0.5 Tm) uniaxial compression on the distribution of reinforcing particles in a 2124-Al/10% SiC MMC
2019
[8] FORMABILITY CHARACTERISTICS OF Al-Cu-TiC COMPOSITE MATERIAL DURING COLD UPSETTING
2019
[9] FABRIKASI KOMPOSIT Al/Al₂O₃ BERPORI DENGAN 10, 20 DAN 30 wt% SPACE HOLDER
2018
[10] Tribological Behavior of Al 7075/SiC Metal Matrix Nano-composite by Stir Casting Method
2018
[11] Review of duplex electroless coatings and their properties
Advances in Materials and Processing Technologies, 2018
[12] Processing and Mechanical Behavior of TiB2 and ZnSt2 Reinforced Aluminium Alloy 6061 Hybrid Composite using Stir Casting
2018
[13] A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
"JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY", 2018
[14] Effect of SiC Reinforcement on Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite
IOP Conference Series: Materials Science and Engineering, 2018
[15] Investigation of Mechanical Properties of Aluminum 6063 with Boron Carbide and Fly Ash Composite Material
2018
[16] Characterization and Mechanical Properties of 2014 Aluminum Alloy Reinforced with Al2O3p Composite Produced by Two-Stage Stir Casting Route
Journal of The Institution of Engineers (India): Series C, 2018
[17] A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
2018
[18] Wear behaviour of Al 7075/SiC/Mg metal matrix nano composite by liquid state process
Advanced Composites and Hybrid Materials, 2018
[19] TOZ METALURJİ METODU İLE ÜRETİLEN ALÜMİNYUM MATRİSLİ VE ALÜMİNA TAKVİYELİ KOMPOZİT MALZEMENİN ABRASİV
2018
[20] Experimentation on composite brake pads with aluminum reinforcement of SiC and Flyash
2018
[21] Aluminium SiC Metal Matrix Composite: A Review
2017
[22] Hot workability and densification behavior of sintered powder metallurgy Al-B4C preforms during upsetting
Journal of Manufacturing Processes, 2017
[23] Fabrication and Testing of Aluminium 6061 Alloy & Silicon Carbide Metal Matrix Composites
2017
[24] A REVIEW ON THE MECHANICAL PROPERTIES OF ALUMINIUM BASED METAL MATRIX COMPOSITE VIA POWDER METALLURGY
International Journal of Innovation Sciences and Research, 2017
[25] Wear Behaviour of Al-6061 alloy with different mesh size and reinforcement of SiC Metal Matrix Composite
2016
[26] Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review
Procedia Technology, 2016
[27] Wear Behaviour of Al-6061/SiC Metal Matrix Composites
Journal of The Institution of Engineers (India): Series C, 2016
[28] R.,“Experimental Investigation of Mechanical and Wear behaviour of Aluminium LM6/ZrO 2 Composite fabricated by stir casting method”
2015
[29] 摩擦攪拌粉末プロセスによる SiC 粒子分散 Al 基複合材料の作製
粉体および粉末冶金, 2015
[30] R.,“Experimental Investigation of Mechanical and Wear behaviour of Aluminium LM6/ZrO2 Composite fabricated by stir casting method”
2015
[31] Studies on the formability of powder metallurgical aluminum–copper composite
Materials & Design, 2014
[32] EFFECT OF SILICON CARBIDE PERCENTAGE ON FRACTURE TOUGHNESS OF ALUMINIUM SILIOCN CARBIDE METAL MATRIX COMPOSITES
2014
[33] Effect of Carbon Nanotubes Addition on Fracture Toughness in Aluminium Silicon Carbide Composite
2014
[34] Effect of silicon carbide percentage on fracture toughness of aluminum silicon carbide metal matrix composites
2014
[35] Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material.
2013
[36] Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material
Metallurgical and Materials Transactions B, 2013
[37] Rolling of cast Al‐SiCp particulate metal matrix composites and strip mechanical properties
Materialwissenschaft und Werkstofftechnik , 2013
[38] A Review on Processing of Particulate Metal Matrix Composites and its Properties
International Journal of Applied Engineering Research, 2013
[39] Hot rolling behaviour of stir-cast Al 6061 and Al 6082 alloys–SiC fine particulates reinforced composites
Journal of Materials Processing Technology, 2012
[40] COMPACTION, SINTERING AND MECHANICAL PROPERTIES OF Al-SiCp COMPOSITES
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET), 2012
[41] The Microstructure and Hardness of Al2O3 Particle Reinforced Composite
Applied Mechanics and Materials, 2012
[42] TM METODU İLE ÜRETİLEN Al2O3-TAKVİYELİ ALUMINYUM ESASLI KOMPOZİTLERİN AŞINMA DAVRANIŞI İÇİN İSTATİSTİKSEL MODEL OLUŞTURULMASI
Y ?AH?N, KE ?KSüZ - timak.balikesir.edu.tr�, 2012
[43] The Effects of Binders on the Strength and Hardness of Aluminium (Al) and Silicon Carbide (SiC) Particulates
2011
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top