Open Journal of Composite Materials

Open Journal of Composite Materials

ISSN Print: 2164-5612
ISSN Online: 2164-5655
www.scirp.org/journal/ojcm
E-mail: ojcm@scirp.org
"Improvement in Mechanical and Thermo-Mechanical Properties of Epoxy Composite Using Two Different Functionalized Multi-Walled Carbon Nanotubes"
written by M. B. A. Salam, M. V. Hosur, S. Zainuddin, S. Jeelani,
published by Open Journal of Composite Materials, Vol.3 No.2A, 2013
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Comparison study: The effect of unmodified and modified graphene nano‐platelets (GNP) on the mechanical, thermal, and electrical performance of different types of …
2021
[2] Effect of Nanofiller Content on Dynamic Mechanical and Thermal Properties of Multi-Walled Carbon Nanotube and Montmorillonite Nanoclay Filler Hybrid Shape …
2021
[3] Improved mechanical performance of three-dimensional woven glass/epoxy spacer composites with carbon nanotubes
2021
[4] Carbon Fiber Composites
2020
[5] Effect of amino-functionalization of MWCNTs on the mechanical and thermal properties of MWCNTs/epoxy composites
2020
[6] A Comprehensive Review on CNTs and CNT-Reinforced Composites: Syntheses, Characteristics and Applications
2020
[7] High-performance fiberglass/epoxy reinforced by functionalized CNTs for vehicle applications with less fuel consumption and greenhouse gas emissions
2020
[8] Mechanical and Physical Test of Hybrid Fiber Composites
2020
[9] Mechanical and wear characteristics of glass fiber reinforced modified epoxy nano composites–A review
2020
[10] Structure-property relationship of glass fabric/MWCNT/epoxy multi-layered laminates
2020
[11] Effect of Al‐SiC nanoparticles and cellulose fiber dispersion on the thermomechanical and corrosion characteristics of polymer nanocomposites
2020
[12] An analytical approach to determine coefficients of thermal expansion of CNT/polymer nanocomposites
2020
[13] Гибридные полимерные композиционные материалы. Часть 1. Состав и свойства
2019
[14] Detailed study of dynamic mechanical analysis for nanocomposites
2019
[15] Novel carbon-fibre powder-epoxy composites: Interface phenomena and interlaminar fracture behaviour
2019
[16] Influence of carbon nanotubes on thermal expansion coefficient and thermal buckling of polymer composite plates: experimental and numerical investigations
2019
[17] Investigation of Stress Distribution and Adhesion Effects of Strain Sensitive Epoxy/MWCNT Nanocomposite Films
2019
[18] Thermo Mechanical Properties of Carbon Nanotube Composites
2019
[19] Crosslinking and interfacial behavior of carboxylic functionalized carbon nanotube Epon nanocomposites: a molecular dynamic simulation approach
2019
[20] A bio-surfactant for defect control: Multifunctional gelatin coated MWCNTs for conductive epoxy nanocomposites
Composites Science and Technology, 2018
[21] Studies on the performance of multi-phased carbon/epoxy composites with nanoclay and multi-walled carbon nanotubes
Multiscale and Multidisciplinary Modeling, Experiments and Design, 2018
[22] Enhancement of flexural strength of glass fiber reinforced polymer laminates using multiwall carbon nanotubes
Polymer Engineering & Science, 2018
[23] Evaluation of dynamic properties of nano oil palm empty fruit bunch filler/epoxy composites
2018
[24] MECHANICAL STRENGTH AND THERMAL STABILITY OF WOVEN GLASS/KENAF FIBRE HYBRID-REINFORCED NANOCLAY WITH EPOXY COMPOSITES
2018
[25] Mechanical behavior of multifunctional and self-healing polymers and composites
2018
[26] Augmenting static and dynamic mechanical strength of carbon nanotube/epoxy soft nanocomposites via modulation of purification and functionalization routes
Soft Matter, 2018
[27] Effect of nano-carbon percentage on properties of composite materials
Journal of Chemical Engineering and Materials Science, 2017
[28] Aligned multi-walled carbon nanotubes (MWCNT) and vapor grown carbon fibers (VGCF) reinforced epoxy adhesive for thermal conductivity applications
Journal of Materials Science: Materials in Electronics, 2017
[29] Superior thermomechanical and wetting properties of ultrasonic dual mode mixing assisted epoxy-CNT nanocomposites
High Performance Polymers, 2017
[30] Influence of nanotube content on the mechanical and thermo-mechanical behaviour of–COOH functionalized MWNTs/epoxy composites
2017
[31] Low-velocity impact performance of carbon fiber-reinforced plastics modified with carbon nanotube, nanoclay and hybrid nanoparticles
Journal of Reinforced Plastics and Composites, 2017
[32] Thermal and dynamic mechanical properties of cellulose nanofibers reinforced epoxy composites
International Journal of Biological Macromolecules, 2017
[33] Cellulose Nanofibers-Graphene Nanoplatelets Hybrids Nanofillers as High-Performance Multifunctional Reinforcements in Epoxy Composites
Polymers and Polymer Composites, 2017
[34] Long term hydrothermal effect on the mechanical and thermo-mechanical properties of carbon nanofiber doped epoxy composites
Journal of Polymer Engineering, 2017
[35] Flexural, Viscoelastic and Thermal Properties of Epoxy Polymer Composites Modified with Cellulose Nanofibers Extracted from Wheat Straw
Sensors & Transducers, 2017
[36] Epoxy Composites Based on Resins Having High Flexibility Reinforced with Functionalized Carbon Nanotubes
2017
[37] АНАЛИЗ МЕТОДОВ ТЕРМОМЕХАНИЧЕСКИХ ИСПЫТАНИЙ КОМПОЗИТНЫХ МАТЕРИАЛОВ И СРАВНЕНИЕ РЕЗУЛЬТАТОВ
2017
[38] The synergistic effect of CNTs and flame retardants on the mechanical behavior of aerospace epoxy resin
2017
[39] Study of Carbon Nanotube Sheets: Assembly, Texture Analysis and Applications
2017
[40] Demulsification performance and the relative solubility number (RSN) of modified poly (maleic anhydride-alt-1-dodecene) on naturally asphaltenic crude oil emulsion
2017
[41] Tensile and Viscoelastic Properties of Epoxy-Carbon Nanotube Nanocomposites
2017
[42] EXTRACTION OF CELLULOSE AND LIGNIN FROM BIOMASS AND THEIR USE IN REINFORCING POLYMERS AND SYNTHESIS OF PHENOLIC RESINS
2017
[43] Efficiency and mechanism of demulsification of oil-in-water emulsions using ionic liquids
2016
[44] Development of nanocomposite for rigid riser application: Diallyl bisphenol A modified Bismaleimide/epoxy interpenetrating network and its nanocomposite (NH2 …
Composites Science and Technology, 2016
[45] Оптимизация рецептурно-технологических параметров, обеспечивающих максимальную теплостойкость полимерных композитов, определяемую …
2016
[46] 碳纳米管/环氧树脂复合材料
消防科学与技术, 2016
[47] Influence of diaminobenzoyl‐functionalized multiwalled carbon nanotubes on the nonisothermal curing kinetics, dynamic mechanical properties, and thermal conductivity of epoxy–anhydride composites
Journal of Applied Polymer Science, 2016
[48] Scheming of microwave shielding effectiveness for X band considering functionalized MWNTs/epoxy composites
IOP Conference Series: Materials Science and Engineering, 2016
[49] Mechanical performances of hygrothermally conditioned CNT/epoxy composites using seawater
Journal of Polymer Engineering, 2016
[50] Cure cycle optimization for the resin infusion technique using carbon nanotube additives
Carbon, 2016
[51] The effect of traditional flame retardants, nanoclays and carbon nanotubes in the fire performance of epoxy resin composites
Fire and materials, 2016
[52] Influence of diaminobenzoyl‐functionalized multiwalled carbon nanotubes on the nonisothermal curing kinetics, dynamic mechanical properties, and thermal …
Journal of applied polymer science, 2016
[53] Fabrication and characterization of carbon nanofiber (CNF) based epoxy composites
IOP Conference Series: Materials Science and Engineering, 2015
[54] Development and characterization of polyethylene glycol–carbon nanotube hydrogel composite
Journal of Materials Chemistry B, 2015
[55] Development of nanocomposite for rigid riser application: Diallyl bisphenol A modified Bismaleimide/epoxy Interpenetrating Network and its Nanocomposite (NH 2-MWCNT)
Composites Science and Technology, 2015
[56] Thermal and mechanical behavior of poly (vinyl butyral)‐modified novolac epoxy/multiwalled carbon nanotube nanocomposites
Journal of Applied Polymer Science, 2015
[57] Pristine and amino functionalized carbon nanotubes reinforced glass fiber epoxy composites
Composites Part A: Applied Science and Manufacturing, 2015
[58] Effect of Premixed Asphaltenes and Demulsifier on Oil-Water Interfacial Properties
2015
[59] Characterization of Mechanical and Viscoelastic Properties of SC-15 Epoxy Nanocomposites Reinforced With Multi-Walled Carbon Nanotubes, Nanoclay and …
2014
[60] Comparison of Low Velocity Impact Properties of MMT, MWCNT and MMT/MWCNT Binary Nanoparticles modi?ed Carbon/Epoxy Composites Subjected to Marine Environmental Conditioning
Conference Paper, 2014
[61] Dynamic Mechanical and Flexural Characteristics of Glass-Carbon Hybrid Composites
Applied Mechanics and Materials, 2014
[62] TENSILE AND FLEXURAL STUDIES ON GLASS-CARBON HYBRID COMPOSITES SUBJECTED TO LOW FREQUENCY CYCLIC LOADING
International Journal of Engineering & Technology , 2014
[63] Low Velocity Impact Characterization of Nanoclay and MWCNTs Binary Nanoparticles Modified Carbon/Epoxy Composites Subjected to Marine Environmental …
2014
[64] Characterization of Mechanical and Viscoelastic Properties of SC-15 Epoxy Nanocomposites Reinforced With Multi-Walled Carbon Nanotubes, Nanoclay and Binary …
2014
[65] Mechanical and physical properties of epoxy resin based nanocomposites reinforced with polyamine functionalized carbon nanotubes
Polymer composites, 2014
[66] CHARACTERIZATION OF MECHANICAL AND VISCOELASTIC PROPERT IES OF CARBON FIBER REINFORCED EPOXY COM POSITES MODIFIED WITH MULTI - WALLED CARBON NANOTU BES, NANOCLAY AND HYBRID NANOPARTICLES
2014
[67] Characterization of Mechanical and Viscoelastic Properties of SC-15 Epoxy Nanocomposites Reinforced With Multi-Walled Carbon Nanotubes, Nanoclay and Binary …
2014
[68] Low Velocity Impact Characterization of Nanoclay and MWCNTs Binary Nanoparticles Modified Carbon/Epoxy Composites Subjected to Marine Environmental …
2014
[69] Improvement in Mechanical and Thermo-Mechanical Properties of Carbon fibre/Epoxy Composites Using Carboxyl Functionalized Multi-Walled Carbon Nanotubes
Polymers & polymer composites, 2013
[70] Improvement in Mechanical and Thermo-Mechanical Properties of Carbon fibre/Epoxy Composites Using Carboxyl Functionalized Multi-Walled Carbon Nanotubes.
Polymers & Polymer Composites, 2013
[71] Characterization of nano-crystalline Mg–Ni–Al hydrotalcite derived mixed oxides as hydrogen adsorbent
2013
[72] Thermodynamics conditions for Guerbet ethanol reaction
2013
[73] Characterization of nano-crystalline MgeNieAl hydrotalcite derived mixed oxides as hydrogen adsorbent
2013
[74] Investigation of the Effect of Nano Particles on Visco-elastic Behaviour of CFRP Hybrid Nanocomposites
[75] Comparison of Low Velocity Impact Properties of MMT, MWCNT and MMT/MWCNT Binary Nanoparticles modified Carbon/Epoxy Composites Subjected to …
[76] CHARACTERIZATION OF MECHANICAL AND VISCOELASTIC PROPERTIES OF CARBON FIBER REINFORCED EPOXY COMPOSITES MODIFIED WITH …
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top