|
[1]
|
Nanoindentation, scratch, and corrosion studies of aluminum composites reinforced with submicron B4C particles
|
|
International Journal of Metalcasting,
2022 |
|
|
|
|
[2]
|
Mechanical properties and tribological performance of A356/Cr3C2-NiCr surface composite developed by high-velocity oxy-fuel and post friction stir processing …
|
|
Surfaces and …,
2022 |
|
|
|
|
[3]
|
Tribological behavior of AZ31/ZrO2 surface nanocomposites developed by friction stir processing
|
|
2020 |
|
|
|
|
[4]
|
Electrochemical Properties of Al2O3-Fe/Si Composites Prepared by High-Energy Mechanical Milling
|
|
2020 |
|
|
|
|
[5]
|
Development of A356/Al2O3+ SiO2 surface hybrid nanocomposite by friction stir processing
|
|
2019 |
|
|
|
|
[6]
|
Quasi Crystal Al (1xxx)/Carbonised Coconut Shell Nanoparticles: Synthesis and Characterisation
|
|
MRS Advances,
2018 |
|
|
|
|
[7]
|
SYNTHESIS AND CHARACTERIZATION OF CARBON NANOTUBES AND NANO ALUMINA-REINFORCED ALUMINUM MATRIX NANOCOMPOSITES
|
|
2017 |
|
|
|
|
[8]
|
POTENTIAL OF CARBONISED COCONUT SHELL AS A BALL-MILLING INTERFACE FOR SYNTHESIS OF ALUMINIUM (1XXX) NANOPARTICLES.
|
|
2017 |
|
|
|
|
[9]
|
Nanoquasicrystalline Al-Fe-Cr-Ti alloy matrix/γ-Al2O3 nanocomposite powders: The effect of the ball milling process
|
|
Journal of Alloys and Compounds,
2017 |
|
|
|
|
[10]
|
POTENTIAL OF CARBONISED COCONUT SHELL AS A BALL-MILLING INTERFACE FOR SYNTHESIS OF ALUMINIUM (1XXX) NANOPARTICLES
|
|
Annals of the Faculty of Engineering Hunedoara-International Journal of Engineering,
2017 |
|
|
|
|
[11]
|
Nanoquasicrystalline Al-Fe-Cr-Ti alloy matrix/γ-Al 2 O 3 nanocomposite powders: The effect of the ball milling process
|
|
Journal of Alloys and Compounds,
2016 |
|
|
|
|
[12]
|
SE.4-O052 Oral Regular FRACTAL ANALYSIS APPLIED TO EVALUATE THE ELECTROCHEMICAL BEHAVIOR OF Mo-Zn PREPARED BY HIGH-ENERGY MECHANICAL ALLOYING
|
|
2016 |
|
|
|
|
[13]
|
Analiza procesa trenja i habanja nanokompozita sa metalnom osnovom
|
|
2015 |
|
|
|
|
[14]
|
Nanoquasicrystalline Al-based matrix/γ-Al2O3 nanocomposites
|
|
Journal of Alloys and Compounds,
2015 |
|
|
|
|
[15]
|
Synthesis and Characterization of Metal Matrix Composites Using High Energy Ball Milling Technique
|
|
International Journal of Applied Engineering Research,
2015 |
|
|
|
|
[16]
|
Nanoquasicrystalline Al-based Matrix/γ-Al< sub> 2 O< sub> 3 Nanocomposites
|
|
Journal of Alloys and Compounds,
2014 |
|
|
|
|
[17]
|
STUDIES OF CRYSTALLITE SIZE AND LATTICE STRAIN IN AL-AL2O3 POWDERS PRODUCED BY HIGH-ENERGY MECHANICAL MILLING
|
|
2014 |
|
|
|
|
[18]
|
Characterisation of Al-10 wt.% Al2O3 Powder Composite: Synthesised via Ball Milling
|
|
Spvryan’s International Journal of Engineering Sciences & Technology,
2014 |
|
|
|
|
[19]
|
Preparation and characterization of Al-Si3N4 composite particles
|
|
Solid State Phenomena ,
2013 |
|
|
|
|
[20]
|
Synthesis and Characterization of Al–Al2O3and Al/(Al2O3-Zro2) Nanocomposites Using High-Energy Milling
|
|
Int. Journal of Engineering Research and Applications,
2013 |
|
|
|
|
[21]
|
Microstructural features and mechanical properties of Al 5083/SiCp metal matrix nanocomposites produced by high energy ball milling and spark plasma sintering
|
|
Materials Science and Engineering: A,
2012 |
|
|
|
|
[22]
|
Microstructural features and mechanical properties of Al 5083/SiC< sub> p metal matrix nanocomposites produced by high energy ball milling and spark plasma sintering
|
|
Materials Science and Engineering: A ,
2012 |
|
|
|
|
[23]
|
Microstructural and Morphological Evolutions of Al-Al2O3 Powder Composite during Ball Milling
|
|
International Journal of Engineering Research and Technology,
2012 |
|
|
|
|
[24]
|
تاثير اندازه ذرات تقويت کننده و دماي بارريزي بر ريزساختار و خواص مکانيکي کامپوزيت زمينه فلزي Al-Al2O3 توليد شده به روش ريخته گري گردابي
|
|
|
|
|
|