Modern Mechanical Engineering

Modern Mechanical Engineering

ISSN Print: 2164-0165
ISSN Online: 2164-0181
www.scirp.org/journal/mme
E-mail: mme@scirp.org
"Axial Tensile Testing of Single Fibres"
written by Prasanna Kumar Ilankeeran, Preetamkumar M. Mohite, Sudhir Kamle,
published by Modern Mechanical Engineering, Vol.2 No.4, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] A proposal to modify the Kelly-Tyson equation to calculate the interfacial shear strength (IFSS) of composites with low aspect ratio fibers
2020
[2] Weibull statistical analysis and experimental investigation of size effects on tensile behavior of dry unidirectional carbon fiber sheets
2020
[3] Processing and Characterization of Nanocellulose Composites: The Leap from Poly (lactic acid) to Polyamide 6
2020
[4] Comparison of Mechanical Performance and Life Cycle Cost of Natural and Synthetic Fiber-Reinforced Cementitious Composites
2020
[5] Control of Cracking in Textile Reinforced Concrete with Unresin Carbon Fibers
2020
[6] Effect of chemical treatment and fumed silica coating on tensile and thermogravimetric properties of jute yarn
2020
[7] Tensile properties of mineral fibers determined with Sentmanat extensional rheometer
2020
[8] Surfactant Adsorption to Cyclopentane Hydrate Interfaces
2019
[9] Integrative design methodologies for lightweight carbon fiber furniture design
Interaction - HUMAN-COMPUTER, 2019
[10] Viability Study for a Carbon-Cork Sandwich Composite
2019
[11] Use of Fibre Reinforcement in Soil for Sustainable Solution of Infrastructure
Innovative Research in Transportation Infrastructure, 2019
[12] Experimental study on the effects of surface treatment reagents on tensile properties of Banana fiber reinforced polyester composites
2019
[13] Physical and Mechanical Characterization of Several Varieties of Oil Palm Mesocarp Fibers Using Different Cross-Sectional Assumptions
2019
[14] A Multiscale Modelling Approach for Estimating the Effect of Defects in Unidirectional Carbon Fiber Reinforced Polymer Composites
2019
[15] Progressive failure analysis of woven composites considering structural characteristics based on micro-mechanics
2019
[16] Carbon Materials: Science And Applications
2019
[17] Evaluation of critical parameters in tensile strength measurement of single fibres
2019
[18] Estimation of the Effects of the Cross-Head Speed and Temperature on the Mechanical Strength of Kenaf Bast Fibers Using Weibull and Monte-Carlo Statistics
2019
[19] COMPATIBILITY ASSESSMENT FOR PHYSICAL AND MECHANICAL PROPERTIES OF EMPTY FRUIT BUNCH CEMENT-BONDED FIBREBOARD
2018
[20] Corrigendum: Dry-spinning of cellulose nanocrystal/polylactic acid composite fibers
2018
[21] Quantitative Ranking and Development of Hydrate Anti-Agglomerants
2018
[22] Dry-spinning of cellulose nanocrystal/polylactic acid composite fibers
2018
[23] Electroless Ni-P metallization on palladium activated polyacrylonitrile (PAN) fiber by using a drying process
Materials Chemistry and Physics, 2018
[24] RANCANG BANGUN ALAT UJI TARIK SERAT ALAM UNTUK MENDUKUNG INDUSTRI NASIONAL
2018
[25] Compósitos cimentícios armados com fios de carbono: avaliação experimental da armadura mínima de tração
2018
[26] The effects of processing on performance and utility in plant fibre-based composites
2018
[27] Physical Properties of E-glass Fiber According to Fiberizing Temperature
2017
[28] INFLUENCE OF RECYCLING PROCESS ON THE TENSILE PROPERTY OF CARBON FIBER
21st International Conference on Composite Materials, 2017
[29] Enhancing the interfacial strength of glass/epoxy composites using ZnO nanowires
Composite Interfaces, 2017
[30] Synthesis and Characterization of Highly Elastic TiCu-Based Amorphous Micro-Wires
Materials transactions, 2017
[31] Evaluation of Tensile Properties of Natural Silk and Coir Fibers
Innovative Design and Development Practices in Aerospace and Automotive Engineering, 2017
[32] 섬유화 온도 변화에 따른 E-glass fiber 의 물리적 특성
2017
[33] Reduction of Clathrate Hydrate Film Growth Rate by Naturally Occurring Surface Active Components
Energy & Fuels, 2017
[34] Characterization of tensile and compressive properties of single fiber filament of toho hts 40 carbon fiber
2017
[35] CONCEPTUAL FRAMWORK OF SCREW PINE LEAVES BIOCOMPOSITE FOR FURNITURE COMPONENT
2016
[36] TO OPTIMIZE THE COST OF SEAT STRUCTURE BY ANALYZING THE ACCURACY OF MECHANICAL PROPERTIES BETWEEN FEA ANALYSIS AND …
2016
[37] Manufacturing and Analysis of Bioactiva Glass Fiber, and its Application in Biomedical Engineering
2016
[38] Damage mechanisms in short glass fibre reinforced thermoplastic during in situ microtomography tensile tests
Composites Part B: Engineering, 2016
[39] Review on Development of Glass Fiber/Epoxy Composite Material and its Characterizations
International Journal of Science, Engineering and Technology Research (IJSETR), 2016
[40] TO OPTIMIZE THE COST OF SEAT STRUCTURE BY ANALYZING THE ACCURACY OF MECHANICAL PROPERTIES BETWEEN FEA ANALYSIS AND …
International Research Journal of Engineering and Technology, 2016
[41] Determination of Optical Fiber Strain in Multi-tube Cable by Finite Element Analysis and its Experimental Validation
2015
[42] Preparation of carbon fiber from water hyacinth liquid tar
International Journal of Industrial Chemistry, 2015
[43] The effectiveness of combined gripping method in tensile testing of UHMWPE single yarn
IOP Conference Series: Materials Science and Engineering, 2015
[44] Micromechanical Cohesive Force Measurements Between Precipitated Asphaltene Solids and Cyclopentane Hydrates
Energy & Fuels, 2015
[45] "A Statistical Analysis of Effects of Test Methods on Spun Carbon Nanotube Yarn "
2015
[46] Statistical Analysis of Effects of Test Methods on Spun Carbon Nanotube Yarn
2015
[47] г. Москва При статическом растяжении современных высокопрочных волокон наблюдается зависимость модуля упругости от базы измерения. Авторы …
2014
[48] VALUE-ADDED LIGNIN BASED CARBON FIBER FROM ORGANOSOLV FRACTIONATION OF POPLAR AND SWITCHGRASS
2014
[49] Carbon Nanotube-reinforced Hybrid Composites Enabled by the PopTube Approach
2014
[50] Longitudinal shear modulus of single aramid, carbon and glass fibres by torsion pendulum tests
International Journal of Mechanical and Mechatronics Engineering, 2014
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top