Modern Mechanical Engineering

Modern Mechanical Engineering

ISSN Print: 2164-0165
ISSN Online: 2164-0181
www.scirp.org/journal/mme
E-mail: mme@scirp.org
"Design and Development of Shell & Tube Heat Exchanger for Beverage"
written by Shravan H. Gawande, Sunil D. Wankhede, Rahul N. Yerrawar, Vaishali J. Sonawane, Umesh B. Ubarhande,
published by Modern Mechanical Engineering, Vol.2 No.4, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Comparison of selected shell and tube heat exchangers with segmental and helical baffles
2020
[2] Numerical analysis of a modified shell and tube heat exchanger model
2019
[3] METODOLOGÍA DE DISEÑO MECÁNICO PARA INTERCAMBIADORES TIPO TUBOS-CORAZA, CABEZAL FLOTANTE Y TUBOS EN U
2019
[4] PENGEMBANGAN PERANGKAT LUNAK DESAIN DAN EVALUASI ALAT PENUKAR KALOR TIPE DOUBLE PIPE DAN SHELL AND TUBE
2019
[5] Forecasting Performance of Organic Rankine Cycle (ORC) Used in Shell-and-tube Heat Exchanger by PSO Technique
Jour of Adv Research in Dynamical & Control Systems, , 2018
[6] Application of entropy and entransy concepts to design shell and tube type surface condenser at different 4L/D ratios for Maral Overseas Ltd
International Journal of Ambient Energy, 2018
[7] Numerical Investigation of Steady-State Heat Conduction in Arbitrary Shaped Heat Exchanger Tubes with Mutliply Connected Cross Sections
International Journal of Applied and Computational Mathematics, 2018
[8] Parametric and Quantitative Analysis on the Development of Shell and Tube Heat Exchanger
International Journal of Advanced Engineering, Management and Science, 2018
[9] Design, Fabrication and Testing of Shell and Tube Heat Exchanger for Heat Recovery from Hydraulic Oil
2017
[10] A BEM formulation of two dimensional steady state heat conduction in exchanger tubes of arbitrary cross sections
International Journal of Heat and Mass Transfer, 2017
[11] Thermodynamic Analysis of Designed and Fabricated Shell and Tube Type Heat Exchanger by DSTHE Software: KERN Method
Polycyclic Aromatic Compounds, 2017
[12] Performance and emission characteristics of a diesel engine runs with corn oil biodiesel blends and air pre-heater
Mechanika, 2017
[13] International Journal of Advance Engineering and Research Development
2017
[14] Modeling and CFD Simulation of Exhaust Gas Recirculation Cooler for Diesel Engine and Compare It with Triangular and Square Fin Tube EGR
International Journal for Scientific Research & Development, 2017
[15] Performance and emission characteristics of a diesel engine fulled by corn oil biodiesel blends with air pre-heater
2017
[16] aerd International Journal of Advance Engineering and Research Development
2015
[17] Performance Analysis and Optimization of Counter Flow Shell and Tube Heat Exchanger Under Diff. Geometric Conditions Using ANSYS 15.0
International Journal of Engineering and Management Research, 2015
[18] A Review on Comparison between Shell And Tube Heat Exchanger And Helical Coil Heat Exchanger
2015
[19] Optimization of Supersonic Ejector by Condensing Rocket Plume
2015
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top