"Dissimilar Welding of Superduplex Stainless Steel/HSLA Steel for Offshore Applications Joined by GTAW"
written by Bravo Ivan Mendoza, Zepeda Cuauhtemoc Maldonado, Hernandez Apolinar Albiter, Piedras Eduardo Robles,
published by Engineering, Vol.2 No.7, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Microstructure and mechanical integrity relationship of PDC weld joints involving dissimilar marine grade alloys
2020
[2] Effect of intermetallic and secondary phases on dry and wet sliding wear behavior of super duplex stainless steel
2019
[3] Microstructure Evolution and Distribution of Mechanical Properties in Shielded Metal Arc Welded Dissimilar DSS 2205 and HY80 Joints
2019
[4] Effect of filler metal on mechanical properties and corrosion behavior of dissimilar metals welds
2019
[5] Avaliação Microestrutural e Resistência à Corrosão de uma Junta Dissimilar entre um Aço de Alta Resistência e Baixa Liga e Aço um Inoxidável Duplex
2019
[6] Dissimilar Welding between 2205 Duplex Stainless Steel and API X52 High Strength Low Alloy Steel
Diffusion Foundations, 2018
[7] Microstructural Characterization and Mechanical Properties of TIG-Welded API 5L X60 HSLA Steel and AISI 310S Stainless Steel Dissimilar Joints
Metallurgical and Materials Transactions A, 2018
[8] Analysis of Dissimilar Metal Welding of EN19 and SS304L
2018
[9] Effect of heat input on dissimilar welds of ultra high strength steel and duplex stainless steel: Microstructural and compositional analysis
Materials Characterization, 2017
[10] Combustion synthesis in bi-layered (Ti− Al)/(Ni− Al) system
Journal of Materials Processing Technology, 2017
[11] Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless steel weldments—A review
Journal of Manufacturing Processes, 2017
[12] Analysis of Metallurgical and Mechanical Properties of Continuous and Pulsed Current Gas Tungsten Arc Welded Alloy C-276 with Duplex Stainless Steel
Transactions of the Indian Institute of Metals, 2017
[13] Using Duplex Stainless Steel to Join X65 Pipe Internally Clad with Alloy 625 for Subsea Applications
Dissertation, Ohio State University, 2017
[14] Effect of the addition of nickel powder and post weld heat treatment on the metallurgical and mechanical properties of the welded UNS S32304 duplex …
2016
[15] Dissimilar welded joints operating in sub-zero temperature environment
The International Journal of Advanced Manufacturing Technology, 2016
[16] PENGARUH PROSES IN-SERVICE WELDING PADA NILAI KEKERASAN SAMBUNGAN
Metalurgi, 2016
[17] Non-destructive evaluation of weld discontinuity in steel tubes by gamma ray CT
Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2015
[18] Hardness and tensile properties of dissimilar welds joints between SAF 2205 and AISI 316L
Science and Technology of Welding and Joining, 2015
[19] An Experimental study on TIG welded joint between Duplex Stainless Steel and 316L Austenitic Stainless Steel
2015
[20] Effect of heat input on microstructure and mechanical properties of dissimilar joints between super duplex stainless steel and high strength low alloy steel
Materials & Design, 2014
[21] Studies on Pitting Corrosion Behaviour and Haz of GTAW of SDSS.
G Amizharasi, S Athiresan - Middle East Journal of Scientific Research, 2014, 2014
[22] Interface microstructure across cladding of super duplex stainless steel with austenitic stainless steel buffer layer
Surface and Coatings Technology, 2014
[23] Evaluation of Microstructure and Texture across the Welded Interface of Super Duplex Stainless Steel and High Strength Low Alloy Steel
Surface and Coatings Technology, 2014
[24] Evaluation of Dissimilar Joint Properties Between UNS S32750 and API X65
2014
[25] Optimization of Gas Metal Arc Welding Process Parameters for Welding Dissimilar Steels.
2014
[26] ارزيابي ريزساختار جوش هاي غير مشابه فولاد زنگ نزن سوپر دوفازي UNS 32750 به فولاد زنگ نزن آستنيتي AISI 304L‎
English Journals Database of Iran, 2013
[27] The microstructure evaluation of dissimilar welds of UNS 32750 super duplex stainless steel to AISI 304L austenitic stainless st
?Majlesi Journal of Materials Engineering?, 2013
[28] SHS welding by thermal explosion: Ti-Ti and Ti-NiAl joints
International Journal of Self-Propagating High-Temperature Synthesis, 2013
[29] ارزیابی ریزساختار جوش¬ های غیر مشابه فولاد زنگ نزن سوپر دوفازی UNS 32750 به فولاد زنگ نزن آستنیتی AISI 304L‎
2013
[30] Numerical Modeling of Heat Transfer and Fluid Flow in Keyhole Plasma Arc Welding of Dissimilar Steel Joints
Int J. Engi. Sci. and Tech, 2012
[31] Optimization of Bead Geometry in CO2 Laser Welding of Ti 6Al 4V Using Response Surface Methodology
Engineering, 2011