Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"Effect of Soaking Time on the Mechanical Properties of Annealed Cold-Drawn Low Carbon Steel"
written by Nurudeen Adekunle Raji, Oluleke Olugbemiga Oluwole,
published by Materials Sciences and Applications, Vol.3 No.8, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Optimization of wear performance and COF of AISI 1040 steel using grey relational analysis
Materials Today: Proceedings, 2022
[2] Effect of Process Annealing Temperature on Some Tensile Properties and Microstructure of Cold Rolled 1010 Steel.
Journal of Academic Research (Applied Sciences), 2022
[3] Recrystallization Annealing Soaking Time Effect on the Tribological Behavior of Cold Upsetted Low Carbon Steel
Materials Research, 2022
[4] Investigation of the mechanical properties of annealing heat treated low carbon steel
Algerian Journal of …, 2022
[5] The study of diffusion annealing procedure on the chemical behaviour of mild steel
AIP Conference …, 2022
[6] Experimentally Determination of Burst Pressure and Failure Location of Liquefied Petroleum Gas Cylinder
2021
[7] Mechanical and Structural Responses of Low Carbon Steel to Cold Rolling and Stress Relief Anneal Treatments
2020
[8] Prediction of Mechanical Properties for High Strength Low Alloyed Steels in a Commercial Hot Dip Galvanizing Line without Soaking Section
2020
[9] Development of a novel Fast-Warm stamping (FWS) technology for manufacturing high-strength steel components
2020
[10] Distinctiveness of Welding Joints Design Based on Mechanical and Corrosion Environmental Influence on Low Carbon Steel
2019
[11] Investigation on the effect of cold drawing process on mechanical properties and structure of seamless steel (Ck60) tube
2019
[12] The consequences of eliminating the soaking section of a commercial hot-dip galvanising line for HSLA production and a control strategy for improving product …
2019
[13] Performance Evaluation of the Effects of Post Weld Heat Treatment on the Microstructure, Mechanical and Corrosion Potentials of Low Carbon Steel
ADVANCED TECHNOLOGIES AND MATERIALS, 2019
[14] An investigation study using mixture proportion of polyethylene glycol-water as quenching medium and their effects on low carbon steel heat treatment process.
International Journal of Energy & Environment, 2018
[15] Optimasi Proses Annealing pada Proses Fine Drawing Untu Kmemperbaiki Sifat Mekanis Produk Kawat Tembaga
2018
[16] Effect of Heat Exposure Time on Tensile Properties in Cold Rolled Steel
2018
[17] Experiment on Effect of heat treatment on mechanical and microstructure properties of AISI steel
Materials Today: Proceedings, 2018
[18] An investigation study using mixture proportion of polyethylene glycol-water as quenching medium and their effects on low carbon steel heat treatment process
2018
[19] The Influence of the Deformation Degree on the Mechanical Properties and Microstructures of the Blanks Obtained by Tube and Wire Drawing
2017
[20] The Influence of the Deformation Degree on the Mechanical Properties and Microstructures of the Blanks Obtained by Tube and Wire Drawing.
Advanced Materials Research, 2017
[21] Hardness and flexural properties of heat treated SKD61 medium carbon steel
2016
[22] Microstructure analysis of steel SA516Gr70 due to tensile strain and creep
2016
[23] Role of Eddy Current Non-Destructive Testing in the Fitness-For-Purpose Assessment of Steel Components
2016
[24] EXPERIMENTAL RESEARCH ON THE INFLUENCE OF COLD ROLLING PARAMETERS ON THE MECHANICAL PROPERTIES OF STEEL FOR DEEP …
2015
[25] Experimental research on the influence of cold rolling parameters on the mechanical properties of steel for deep drawing
2015
[26] Literature review on the effect of processing on the mechanical and metallurgical properties of low carbon steels
2015
[27] Optimasi Proses Annealing pada Proses Fine Drawing untuk Memperbaiki Sifat Mekanis Produk Kawat Tembaga
2015
[28] Study and development of empirical relations among various physical parameters of LPG cylinder material and suggest fail safe inspection plan for manufacturing
2015
[29] An Assessment of the Microstructure and Mechanical Properties of 0.26% Low Carbon Steel under Different Cooling Media: Analysis by one-way ANOVA
Industrial Engineering Letters, 2014
[30] EXPERIMENTAL RESEARCH CONCERNING THE INFLUENCE OF THE COLD ROLLING PARAMETERS ON MECHANICAL PROPERTIES OF STEEL FOR DEEP DRAWING
THE ANNALS OF “DUN?REA DE JOS” UNIVERSITY OF GALA?I FASCICLE V, TECHNOLOGIES IN MACHINE BUILDING, 2014
[31] STUDY ON LPG CYLI
Int J Adv Engg Tech/IV/III/July-Sept, 2013
[32] Optimization of the Annealing Parameters for Improved Tensile Properties in Cold Drawn 0.12 wt% C Steel
Engineering, 2013
[33] COMPARATIVE ANALYSIS OF LPG CYLINDER HARDNESS VALUES OBTAINED FROM BRINELL HARDNESS TEST AND PORTABLE HARDNESS TESTER
Int J Adv Engg Tech/IV/III/July-Sept, 2013
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top