"Recycling of Glass Fibers from Fiberglass Polyester Waste Composite for the Manufacture of Glass-Ceramic Materials"
written by Felix Antonio López, Maria Isabel Martín, Irene García-Díaz, Olga Rodríguez, Francisco Jose Alguacil, Maximina Romero,
published by Journal of Environmental Protection, Vol.3 No.8, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Študija proizvodnosti hidrolize saharoze z encimom vezanim na odpadna steklena vlakna
2019
[2] Analysis of Sisal Fiber Waviness Effect on the Elastic Properties of Natural Composites Using Analytical and Experimental Methods
2019
[3] Preparation and Characteristics of Humidity Controlling Characteristic Porous Ceramics with Waste Fiberglass and Waste Catalyst
2018
[4] Characterization and morphological properties of glass fiber reinforced epoxy composites fabricated under varying degrees of hand lay-up techniques
Journal of Applied Sciences and Environmental Management, 2018
[5] Effect of Fiber Waviness on Tensile Properties of Sliver-Based Natural Fiber Composites
2018
[6] Cost-effective and sustainable approach to transform end-of-life vinyl banner to value added product
Resources, Conservation and Recycling, 2018
[7] CHARACTERIZATION OF THERMOPLASTICS FOR LEAF SPRING APPLICATION
2017
[8] Effect of the addition of fibreglass waste on the properties of dried and fired clay bricks
IOP Conference Series: Materials Science and Engineering, 2017
[9] THE IMPLEMENTATION OF RECYCLED THERMOSETTING COMPOSITE POWDER IN ROTATIONAL CASTING
2017
[10] GARMENTS WASTE RECYCLING IN DHAKA: A CASE STUDY OF MIRPUR AREA
2017
[11] GLASS-FIBRE REINFORCED COMPOSITES: THE EFFECT OF FIBRE LOADING AND ORIENTATION ON TENSILE AND IMPACT STRENGTH
Nigerian Journal of Technology, 2017
[12] Experimentally determined apparent thermal conductivity of banana fibre
2016
[13] A Comparison of Banana Fiber Thermal Insulation with Conventional Building Thermal Insulation
British Journal of Applied Science & Technology, 2016
[14] Application of waste bulk moulded composite (BMC) as a filler for isotactic polypropylene composites
Journal of Advanced Research, 2016
[15] High voltage fragmentation and mechanical recycling of glass fibre thermoset composite
CIRP Annals, 2016
[16] Towards a sustainable use of primary boron. Approach to a sustainable use of primary resources
Resources, Conservation and Recycling, 2015
[17] Mechanical and physicochemical characterization of an epoxy-based composite reinforced with fibrous biopolymer byproduct
Fibers and Polymers, 2015
[18] Regeneration of Thermally Recycled Glass Fibre for Cost-Effective Composite Recycling: Performance of fibre recyclates from thermoset composites and with …
2014
[19] Wpływ warunków przetwórstwa na właœciwoœci kompozytu poliwęglanu napełnionego włóknem szklanym
2014
[20] Regeneration of Thermally Recycled Glass Fibre for Cost-Effective Composite Recycling: Performance of fibre recyclates from thermoset composites and with …
2014
[21] Regeneration of Thermally Recycled Glass Fibre for Cost-Effective Composite Recycling: Performance of fibre recyclates from thermoset composites and with subsequent ReCoVeR treatments
ECCM16, 2014
[22] Development of crystalline phases in sintered glass-ceramics from residual E-glass fibres
Ceramics International, 2014
[23] Technical Characterization of Sintered-Glass Ceramics Derived from Glass Fibers Recovered by Pyrolysis
Journal of Materials in …, 2014
[24] Effect of recycled glass fiber on the corrosion behavior of reinforced mortar
Construction and Building Materials, 2014
[25] Wpływ warunków przetwórstwa na właściwości kompozytu poliwęglanu napełnionego włóknem szklanym
Przetwórstwo Tworzyw, 2014
[26] 废电路板中回收玻璃纤维对聚丙烯基复合材料力学性能的影响
化工进展, 2013
[27] Researches in the field of producing ceramic tiles of lower material capacity for interior wall facing
Engineering Structures and …, 2013