Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Optimization of Friction and Wear Behaviour in Hybrid Metal Matrix Composites Using Taguchi Technique"
written by V. C. Uvaraja, N. Natarajan,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Optimization of ductility and yield strength on Al2024/B4C composite material using Taguchi Technique
2021
[2] Frictional behaviour of AA7050/7.5 B4Cp/Gr hybrid composites fabricated through stir casting
2021
[3] Tribo-mechanical behaviour of aluminium-based metal matrix composite: A review
2021
[4] A Review on the Significance of Hybrid Particulate Reinforcements on the Mechanical and Tribological Properties of Stir-Casted Aluminum Metal Matrix Composites
2021
[5] Optimization of process parameter on yield strength and ductility on Al7075/SiC/Gr. Hybrid composite by using Taguchi's technique
2021
[6] Investigating the Effect of Si 3 N 4 Reinforcement on the Morphological and Mechanical Behavior of AA2219 Alloy
2021
[7] Al-Ni/GO ve Al-Ni/TiO2 metal matrisli kompozit malzemelerin üretilmesi ve karakterizasyonu
2020
[8] Simultaneous optimization of drilling responses using GRA on Al-6063/TiC composite
2020
[9] A review of ceramic/bio-based hybrid reinforced aluminium matrix composites
2020
[10] Experimental investigation on mechanical properties and wear characterization of Al‐Si12CulMg1 aluminium alloy reinforced with titanium diboride and boron carbide …
2020
[11] Mechanical and Wear Performances of Aluminium‑Based Metal Matrix Composites: A Review
2020
[12] Study of Parametric Influence on Dry Sliding Wear and Corrosion Behavior of AA5754-TiB2 In Situ Composites
2020
[13] Investigation of wear behavior of aged and non-aged SiC-reinforced AlSi7Mg2 metal matrix composites in dry sliding conditions
2020
[14] Experimental Investigation of Mechanical and Tribological Properties of Al 7075—MoS2/ZrO2/Ni Hybrid Composite
Advances in Materials and Metallurgy, 2019
[15] Investigations for Surface Hardness of Aluminum Matrix Composites with Hybrid Reinforcement
2019
[16] Effects of flyash addition on the dry sliding tribological behavior of aluminum composites
2019
[17] Intercritical and subcritical spheroidization of 10B38 cold heading steel
2019
[18] Characterization of Al-7075 metal matrix composites: a review
2019
[19] STUDY OF THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF ALUMINIUM HYBRID COMPOSITES WITH
2019
[20] Investigation on mechanical and corrosion behaviour of AA8011 reinforced with TiC and graphite hybrid composites
2019
[21] Experimental study on the mechanical properties of heat treated aluminium composites
2019
[22] Synthesis, Characterization and Dry Sliding Wear Behaviour of Al 7075–MoSi2 Composites Prepared by Stir Casting Technique
Transactions of the Indian Institute of Metals, 2019
[23] Optimization of Wear and Friction Parameters of Al-WC Composite Using Response Surface Methodology
2019
[24] Effect of ceramic and metallic reinforcement on mechanical, corrosion, and tribological behavior of aluminum composite by adopting design of experiment through …
2018
[25] Dry sliding wear characterization of red mud reinforced aluminium composite
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018
[26] Effect of Ceramic and Metallic Reinforcement on Mechanical, Corrosion, and Tribological Behavior of Aluminum Composite by Adopting Design of Experiment Through Taguchi Technique
2018
[27] The effect of fiber orientation on wear behavior of glass fiber-epoxy filled with particles
Industrial Lubrication and Tribology, 2018
[28] Optimization of Tribological Behaviour of Aluminium Based Metal Matrix Composites Using Grey-Taguchi Method
Journal of Advanced Microscopy Research, 2018
[29] Optimization of Dry Sliding Wear Properties of Aluminum MMCs Using Grey-Taguchi Method
Journal of Advanced Microscopy Research, 2017
[30] INVESTIGATION ON THE MICROSTRUCTURE AND WEAR CHARACTERISTICS OF HEAT TREATED HYBRID ALUMINIUM COMPOSITES
2017
[31] Fabrication and Performance Test of Aluminium Alloy-Rice Husk Ash Hybrid Metal Matrix Composite as Industrial and Construction Material
2017
[32] Wear and Friction Study of Ferroelectric Composite Nanomaterial on Pin on Disc Machine
IOSR Journal of Applied Physics, 2017
[33] REVIEW PAPER ON FABRICATION OF ALUMINUM MAGNESIUM COMPOSITE MATERIAL
2017
[34] Friction & Wear Analysis of PTFE material & its composites
International Journal of Scientific & Engineering Research, 2017
[35] Tribological and Frictional Characteristics of Alsi7mg-Wc-Graphite Hybrid Composites
2016
[36] Experimental Investigation on Tribological Quantities of Bearing Material (Brass) Using TAGUCHI Technique
2016
[37] Enhanced Fuzzy Rule with Modified Particle Swarm Optimization Based Handoff Algorithm in Wireless Mobile Communication Network
Asian Journal of Research in Social Sciences and Humanities, 2016
[38] Characterization of hybrid aluminum matrix composites for advanced applications–A review
Journal of Materials Research and Technology, 2015
[39] Process Parameter Optimization in Jatropha Methyl Ester Yield Using Taguchi Technique
Materials and Manufacturing Processes, 2015
[40] Evaluation of the Taguchi Method for Wear Behavior of Al6061/Cu-SiC/Cu-Gr Hybrid Composite
Materials Today: Proceedings, 2015
[41] B4C takviyeli alüminyum kompozit malzemelerin yarı katı karıştırma yöntemi ile üretimi ve karakterizasyonu
2015
[42] Opportunities And Challenges For Indian Banks In Future
SHIV SHAKTI International Journal of in Multidisciplinary and Academic Research (SSIJMAR), 2014
[43] Application of Taguchi Technique to Optimize Tribological Behaviour of Al6061T6/SiC/Al2O3 Metal Matrix Composite
V Kumar, AK Mishra, BK Roy - ijsrp.org, 2014
[44] Wear Characterization of Aluminium/Sic/Al2O3 Hybrid Metal Matrix Composite Using Taguchi Technique
International Journal of Innovative Research and Development, 2014
[45] A Review on Sliding Wear Behaviour of Aluminium Matrix Composites with Hybrid Reinforcements for Automotive Applications
Tribology Online, 2014
[46] Tribological and mechanical behavior of particulate aluminum matrix composites
Journal of Reinforced Plastics and Composites, 2014
[47] SHIV SHAKTI
2014
[48] Study of Dry Sliding Wear Behavior of Aluminium/SiC/Al2O3/Graphite Hybrid Metal Matrix Composite Using Taguchi Technique
International Journal of Scientific and Research Publications, 2013
[49] Frictional and wear characteristics of stir-cast hybrid composite aluminium Al6061reinforced with SiC particulates
2013
[50] Influence of Boron Additions on Mechanical Properties of Carbon Steel
Journal of Minerals and Materials Characterization and Engineering, 2012
[51] Entangled dilaton dyons
2012
[52] ALUMINUM BASED HYBRID METAL MATRIX COMPOSITES: A REVIEW OF SELECTION PHILOSOPHY AND MECHANICAL PROPERTIES FOR ADVANCED …
Free SCIRP Newsletters
Copyright © 2006-2022 Scientific Research Publishing Inc. All Rights Reserved.
Top