"Influence of Cutting Speed, Feed Rate and Bulk Texture on the Surface Finish of Nitrogen Alloyed Duplex Stainless Steels during Dry Turning"
written by D. Philip Selvaraj, P. Chandramohan,
published by Engineering, Vol.2 No.6, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Evaluation and multi-objective optimization of nose wear, surface roughness and cutting forces using grey relation analysis (GRA)
2019
[2] Studies on the Characterization and Machinability of Duplex Stainless Steel 2205 during Dry Turning
2019
[3] EXPERIMENTAL INVESTIGATIONS OF NITROGEN ALLOYED DUPLEX STAINLESS STEEL IN DRY MILLING PROCESS
Journal of Engineering Science and Technology, 2018
[4] Технологічне забезпечення циклічної довговічності деталей при їх токарному обробленні
2018
[5] Effect of cutting parameters on surface roughness in turning of annealed AISI-1020 steel
2018
[6] Efecto de los parametros do corto del torneado en la rugosidad superficial de acero AISI-1020 recocido
2018
[7] Machinability studies of Duplex Stainless Steel 2205 using coated tools
2017
[8] Effect Of Cutting Parameters On Surface Roughness And Cutting Tool Temperature In Turning AISI 1045 Steel
2017
[9] EFFECT OF CUTTING PARAMETERS ON SURFACE ROUGHNESS IN TURNING OPERATIONS
Al-Qadisiya Journal for Engineering Sciences, 2016
[10] The effect of heat treatment on the mechanical properties and machinability of AAR Grade E steel
2016
[11] Process Capability Analysis of a Centre Lathe Turning Process
2016
[12] PREDICTION OF SURFACE ROUGHNESS IN END MILLING OPERATION OF DUPLEX STAINLESS STEEL USING RESPONSE SURFACE …
2015
[13] PREDICTION OF SURFACE ROUGHNESS IN END MILLING OPERATION OF DUPLEX STAINLESS STEEL USING RESPONSE SURFACE METHODOLOGY
Journal of Engineering Science and Technology, 2015
[14] Factors influencing surface integrity in hard machining of steels-A review
2015
[15] Comportement des carbures métalliques lors de l'usinage des aciers inoxydables: Application aux austénitiques et martensitiques
2015
[16] Performance analysis of cryogenically treated and Ti Al N coated cermet cutting tools
2014
[17] Experimental Investigations on Surface Roughness, Cutting Force and Tool Wear of Duplex Stainless Steel in End Milling Using Taguchi Method
International Review of Mechanical Engineering (IREME), 2013
[18] Surface layer properties of AISI 316L steel when turning under dry and with minimum quantity lubrication conditions
?Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture?, 2012
[19] Optimization of cryogenic treatment parameters to maximise the tool wear of HSS tools by Taguchi method
MC Kumar, P VijayaKumar, B Narayan - Citeseer, 2012
[20] Optimization of cryogenic treatment parameters to maximize the tool wear of HSS tools by Taguchi method
International Journal of Modern Engineering Research (IJMER), 2012
[21] Effect of cryogenic treatment of cemented carbide inserts on properties & performance evaluation in machining of stainless steel
Thesis, 2011