"Effect of Heat Treatment Processes on the Mechanical Properties of Medium Carbon Steel"
written by T. Senthilkumar, T. K. Ajiboye,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Finite Element Modeling of a Thin Circular Disc Manufactured by Forming Process used in Cyclic Loading and Unloading Applications
2020
[2] A short review on different metal alloys on rapid cooling process
2020
[3] Influence of Oak Tree Ash onthe Microstructure and Mechanical Properties of Medium Carbon Steel
2020
[4] Optimization of Heat Treatment Process Parameter for High Speed Steel Taper Shank Drill
2020
[5] MICROSTRUCTURAL IMAGE ANALYSES OF MILD CARBON STEEL SUBJECTED TO A RAPID CYCLIC HEAT TREATMENT.
2020
[6] Improving the Performance of M42 Twist Drill Tool
2019
[7] Pengaruh Heat Treatment terhadap Perubahan Struktur Mikro dan Konduktivitas Termal pada Baja S 45 C
2019
[8] Effect of Cooling Medium and Tempering on Microstructures and Hardness of SK3 High Carbon Steel
2019
[9] MATERIAL POWER INFLUENCE OF BUCKET TEETH EXCAVATORAISI 4140USING ABRASIVE WEAR TEST WITH OGOSHI UNIVERSAL HIGH SPEEDTESTINGMETHOD
GLOBAL JOURNAL OF ADVANCED ENGINEERING TECHNOLOGIES ANDSCIENCES, 2019
[10] АНАЛИЗ ТЕХНОЛОГИИ ИЗГОТОВЛЕНИЯ ДЕТАЛЕЙ ИЗ ПОРОШКОВЫХ МАТЕРИАЛОВ ДЛЯ ПРИВОДА ЭЛЕКТРОИНСТРУМЕНТА
2019
[11] ЭФФЕКТИВНОСТЬ УПРАВЛЕНИЯ ПРЕДПРИЯТИЕМ В СОВРЕМЕННОМ ИНФОРМАЦИОННОМ ОБЩЕСТВЕ
2019
[12] Intercritical and subcritical spheroidization of 10B38 cold heading steel
2019
[13] A REVIEW ON EFFECT OF HEAT TREATMENT ON MECHANICAL PROPERTIES OF VARIOUS STEELS
2019
[14] Study the effect of cooling medium on the torsion resistance and hardness of medium carbon steel
IOP Conference Series: Materials Science and Engineering, 2018
[15] Effects of Quenchants on Impact Strength of Single-Vee Butt Welded Joint of Mild Steel
IOP Conference Series: Materials Science and Engineering, 2018
[16] EFFECT OF COOLING RATE ON HARDNESS OF AISI 1040 STEEL
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, 2018
[17] "INVESTIGATION OF HARDNESS FOR AISI 1040 STEEL USING VARIOUS COOLING METHODS "
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, 2018
[18] Effect of Heat Treatment Parameters on Mechanical Properties of Medium Carbon Steel
2018
[19] INVESTIGATION OF HARDNESS FOR AISI 1040 STEEL USING VARIOUS COOLING METHODS
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, 2018
[20] Analysis of AISI material power of AISI 4140 bucket teeth excavator using influence of abrasive wear
AIP Conference Proceedings, 2018
[21] Experimental Determination of Effect of Cooling Medium on Torsional Properties of MT40N
International Journal for Research in Applied Science & Engineering Technology, 2018
[22] Study on Effect of Post Processing on Direct Metal LASER Sintered 420 Stainless steel Infiltrated with Bronze
2018
[23] Parameter Optimization of Heat Treatment on AISI 4140 Material Hardness Value for Bucket Teeth Application Using Taguchi Method
2018
[24] INFLUENCE OF HEAT TREATMENT ON THE ABSORBED ENERGY OF CARBON STEEL ALLOYS USING OIL QUENCHING AND WATER QUENCHING
Journal of Mechanical Engineering Research and Developments, 2018
[25] Rapid Cyclic Heating of Mild Steel and its Effects on Microstructure and Mechanical properties
IOP Conference Series: Materials Science and Engineering, 2018
[26] Experimental Study on Heat Treatment of SS 420 and EN 24 Using Nanoparticulate Quenching Process
International Journal of Nanoscience, 2018
[27] MATERIAL POWER INFLUENCE OF BUCKET TEETH EXCAVATORAISI 4140 USING ABRASIVE WEAR TEST WITH OGOSHI UNIVERSAL HIGH SPEED TESTINGMETHOD
Global Journal of Advance Engineering Technology and Sciences, 2018
[28] Effect of Quenching and Tempering on Corrosion of Low Carbon Steel in Acid Environment
2018
[29] Effect of Heat Treatment in Low Carbon Steel
2018
[30] Rapid cyclic heating of mild steel and its effect on microstructure and mechanical properties
2018
[31] EFFECT OF CYCLIC RAPID HEATING ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF
2017
[32] Investigation of Influence of Quenching and Annealing on the Plane Fracture Toughness and Brittle to Ductile Transition Temperature of the Zinc Coated Structural …
International Journal of Surface Engineering and Interdisciplinary Materials Science (IJSEIMS), 2017
[33] تصميم نظام قطع جديد في قصاصة النباتات المحمولة‎
2017
[34] An Experimental Investigation on Hardness and Microstructure of Heat Treated EN 9 Steel
IOP Conference Series: Materials Science and Engineering, 2017
[35] EFFECTS OF THERMAL TREATMENT PROCESSES (TTP) ON SOME OF THE MECHANICAL PROPERTIES OF WELDED 0.165% CARBON STEEL
2017
[36] Influence of Cryogenic Processing on Microstructure and Properties of En8 Steel
International Journal of Scientific & Engineering Research, 2017
[37] Effect of Heat Treatment on Low Carbon Steel: An Experimental Investigation.
2017
[38] Optimization of Chemical Composition for Pressure Vessel Steel Grade P460NL2 Industrial Trial Research.
Advanced Materials Research, 2017
[39] A Study on the Tensile Test Properties of Medium Carbon Steel Specimens Under Specific Manufacturing Conditions
2016
[40] Designing spring load system for mechatronic actuator
2016
[41] Investigationon Hardness or Heat Treated ASSAB Tool Steels
Indian Journal of Science and Technology, 2016
[42] Effect of Quenching Media on Mechanical Properties for Medium Carbon Steel
Int. Journal of Engineering Research and Application, 2016
[43] Intensifying the Mechanical Properties of Is-4454/1981 Spring Steel Material
Asian Journal of Research in Social Sciences and Humanities, 2016
[44] 'Department of Metallurgical and Materials Engineering
2016
[45] Hardness and flexural properties of heat treated SKD61 medium carbon steel
2016
[46] Investigation of NLO Active 2-Amino-5-methylpyridinium 2-hydroxy-5-chlorobenzoate Single Crystals
Asian Research Consortium, 2016
[47] Effects of Thermal Treatment Processes (TTP) on the Tensile Properties of 0.165% Carbon Steel
2016
[48] The effect of heat treatment on the mechanical properties and machinability of AAR Grade E steel
2016
[49] Electrochemical Corrosion Behavior of Spirally-welded API X-70 Line-pipe Steel in Acidic and Salt Media
2015
[50] A Study on the Effect of Heat on Properties of Reinforcing Steel Bars made from Scrap Metal
2015
[51] Surface Layer Modelling for Materials under Thermal Hardening Process
Industrial Engineering Letters, 2015
[52] Fatigue Behaviour of Medium Carbon Steel of Different Grain Structures
Industrial Engineering Letters, 2015
[53] Effect of Heat Treatment on Microstructure and Mechanical Properties of SAE 1025 Steel: Analysis by one-way ANOVA
2015
[54] Pengaruh Heat Treatment Terhadap Struktur dan Kekerasan Lapisan Cr-Al pada Low Carbon Steel yang Didepositkan dengan Metode Pemaduan Mekanik
2015
[55] An Assessment of the Microstructure and Mechanical Properties of 0.26% Low Carbon Steel under Different Cooling Media: Analysis by one-way ANOVA
Industrial Engineering Letters, 2014
[56] Experimental Analysis of Temperature Distribution in Machining Operation
TK Ajiboye, AGF Alabi, AM Abioye - rspublication.com, 2014
[57] Investigation on the Mechanical Properties of SA 210C Tubular Joints
Procedia Engineering, 2014
[58] Study of Hydrogen Permeation in a Micro-Alloyed Heat Treated Steel
Defect and Diffusion Forum, 2014
[59] A STUDY ON THE MECHANICAL PROPERTIES OF S45C MEDIUM TYPE CARBON STEEL SPECIMENS UNDER LATHE MACHINING AND QUENCHING CONDITIONS
2014
[60] Studying the Post Weld Microstructural Evolution of Conventionally Heat Treated Medium Carbon Steel
JO Ayanleke, GO Olorunfemi, B Eng - akamaiuniversity.us, 2014
[61] Effect of Tempering Temperature on Mechanical Properties of Medium Carbon Steel
SA Tukur, MM Usman, I Muhammad, NA Sulaiman - ijettjournal.org, 2014
[62] Investigation on the Mechanical Properties of SA 210 C Tubular Joints
Procedia Engineering, 2014
[63] VARIATION OF FACE RUN OUT FOR CROWN WHEELS PLACED IN THE STACK OF A HEAT FURNACE AND THE DESIGN OF V-STACK
2014
[64] Fatigue Characteristic of Medium Carbon Steel with Different Grain Structures
Fatigue of Materials III Advances and Emergences in Understanding: Proceedings of the Third Biennial Symposium, 2014
[65] Effect of Heat Treatments on Corrosion of Welded Low-Carbon Steel in Acid and Salt Environments
2013
[66] The Effect of Heat Treatment on Elastic-Plastic Behavior and Absorbing Energy for L-shaped Mild Steel Under Compressive Axial Load.
AA Ghaidan - Al-Rafadain Engineering Journal, 2013
[67] The Effects of Heat Treatment on Microstructure and Mechanical Properties of AISI 4140 for Base Cutter Cane Harvester
Advanced Materials Research, 2013
[68] The Effect of Heat Treatment onElastic-PlasticBehaviorand Absorbing Energy for L-shaped Mild Steel Under CompressiveAxialLoad-ENG
AL Rafdain Engineering Journal, 2013
[69] Effect of Titanium Addition on Behavior of Medium Carbon Steel
Journal of Minerals and Materials Characterization and Engineering, 2012
[70] Evaluation of Mechanical Properties of Medium Carbon Steel Quenched in Water and Oil
Journal of Minerals and Materials Characterization and Engineering, 2012
[71] Influence of Boron Additions on Mechanical Properties of Carbon Steel
Journal of Minerals and Materials Characterization and Engineering, 2012
[72] Pengaruh Heat Treatment Terhadap Struktur dan Kekerasan Lapisan Cr-Al pada Low Carbon Steel yang Didepositkan dengan Metode
[73] Improving the Performance of Tool in High Speed Drilling-Review
[74] A Review on Optimization of Heat Treatment Process Parameter for High Speed Steel Taper Shank Drill
[75] CORROSION EVALUATION ON MILD STEEL IN DIFFERENT SELECTED MEDIA