Analysis of Tool Wear Rate in Drilling Operation using Scanning Electron Microscope (SEM)

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1
Citations h5-index & Ranking*

Journals Menu

"Analysis of Tool Wear Rate in Drilling Operation using Scanning Electron Microscope (SEM)"
written by Anil Jindal,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2012

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Effect of Various Microstructures Obtained from Heat Treatment on Machinability Behavior of Ti-6Al-4V Alloy
	International Journal of …, 2022

[2]	Experimental analysis on drilling of super duplex stainless steel 2507 (SDSS 2507) using cryogenic LCO2 and MQL process
	Biomass Conversion …, 2022

[3]	Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid
	Materials Today …, 2022

[4]	Determination of twist drill bits wear: the effect of the composition and structure of the steels
	Polish Journal of …, 2022

[5]	Drilling of 7075 Aluminum Alloys
	2022

[6]	Comparison of Tool Wear Mechanisms During Drilling of Aluminium Alloy 7075 in Dry and Chilled Air Conditions
	Journal of Science …, 2022

[7]	Estudo experimental da furação de aços inoxidáveis austeníticos e duplex com brocas de 2 e 3 gumes
	2022

[8]	Investigation of the Effect of Drill Bit Feature on Hole Surface Quality and Tool Wear
	Dicle Üniversitesi Mühendislik Fakültesi Mühendislik …, 2021

[9]	Effect of process parameters on drilling—An overview
	2021

[10]	Study the Effect of Different Drilling Methods on Hole Dimensional Accuracy and Surface Roughness of AISI 1045 Steel
	2021

[11]	Review on tool condition classification in milling: A machine learning approach
	2021

[12]	The Effect of Cutting Parameters on Tool Wear in Drilling Aluminium 7075
	2020

[13]	Skäreggprepareringens påverkan på slitage hos hårdmetallborrar: En fallstudie enligt DMAIC på Scania Motorbearbetning
	2020

[14]	Experimental Investigations on Tool Wear during Abrasive Assisted Drilling of Aluminum Matrix Composite Using ANOVA
	Optimization in Engineering Research, 2020

[15]	Simulasi Perubahan Back Rake Angle Polycrystalline Diamond Carbide Drill Bit untuk Meminimalkan Keausan Pahat
	2020

[16]	Experimental ınvestigations on tool wear during abrasive assisted drilling of aluminum matrix composite using anova
	Optimization in Engineering Research, 2020

[17]	Machining in high pressure coolant environment–a strategy to improve machining performance: a review
	2019

[18]	Improving the Performance of Tool in High Speed Drilling-Review
	2019

[19]	The capacity of statistical features extracted from multiple signals to predict tool wear in the drilling process
	2019

[20]	Improving the Performance of M42 Twist Drill Tool
	2019

[21]	A Technical Review on the Wear Rate of Deep-Hole Drilling Process Based on BTA (Boring and Trepanning Association) Technique
	2018

[22]	Studying the lubricity of new eco-friendly cutting oil formulation in metal working fluid
	Industrial Lubrication and Tribology, 2018

[23]	Optimisation of Deep Drilling Parameters on Tool Wear, Tool Surface Temperature and Job Surface Roughness
	2018

[24]	A comparative study between internal and external signals for tool wear detection in drilling processes
	2018

[25]	Studies on Chip morphology, Hole deviation and Temperature distribution for drilling using HSS, TiN and TiAlN coated HSS tool
	2018

[26]	MORPHOLOGICAL ANALYSIS OF THE CARBIDE DRILL BIT IN DRILLING METAL MATRIX COMPOSITES AND HYBRID METAL MATRIX COMPOSITES
	ARPN Journal of Engineering and Applied Sciences, 2017

[27]	Study on Hole Quality in Drilling AA 6063 Plate under Cryogenic Pre-Cooling Environment
	Materials Today: Proceedings, 2017

[28]	Optimization of Twist Drill Tool
	2017

[29]	An experimental investigation into tool wear in micro-drilling of aluminium, aluminium/copper metal alloys and carbon fibre reinforced composites
	2017

[30]	A Study of Surface Roughness in Drilling of EN-9 Steel using Taguchi Approach
	International Journal of Engineering and Advanced Technology, 2017

[31]	Integrated Approach for Diagnostics and Prognostics of IC Engine Bearings
	2016

[32]	Facultad de Ingeniería Mecánica y Eléctrica
	2016

[33]	Optimización del desgaste de la herramienta en una talladora de engranajes CNC utilizando el método Taguchi y análisis de la varianza (ANOVA).
	2016

[34]	Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable …
	Journal of Cleaner Production, 2016

[35]	Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils
	Journal of Cleaner Production, 2016

[36]	Optimization of Process Parameters of AISI D3 Steel with Abrasive Assisted Drilling
	International Research Journal of Engineering and Technology, 2016

[37]	Tool Wear, Surface Roughness, and Power Requirement for Drilling Operation Using Uncoated and Coated HSS Tool
	2016

[38]	Effect of Cutting Parameters on Dimensional Hole Quality and Burr Height for One-Shot Drilling of Hybrid Stacks
	2016

[39]	OPTIMIZING THE SURFACE INTEGRITY OF MACHINED Ti-6Al-4V USING ADVANCED CARBIDE INSERTS AND MINIMUM QUANTITY LUBRICATION
	2016

[40]	Chip Formation When Drilling AISI 316L using Uncoated Carbide Twist Drill
	2015

[41]	Chip Formation When Drilling AISI 316L Stainless Steel using Carbide Twist Drill
	Procedia Manufacturing, 2015

[42]	Effect of Different Lubricants on Small Hole Drilling in Ti-6Al-4V–A Taguchi-Grey Approach
	Applied Mechanics and Materials, 2014

[43]	A Study of Surface Roughness & Surface Integrity in Drilling Process Using Various Vegetable–Oil Based Lubricants In Minimum Quantity Lubrication
	Australian Journal of Basic & Applied Sciences, 2014

[44]	Cercetări privind comportarea în așchiere a burghielor elicoidale cu trei tăișuri curbe și cu suprefață de așezare hiperboloidală
	2013

[45]	MODELLING OF CONTACT PHENOMENA IN THE CUTTING ZONE AT MACHINING OF HOLES
	2013

[46]	ASSESSMENT OF THE FRICTION AND WEAR BEHAVIOR OF DRILLING TOOLS
	2012

[47]	Biomechanical Measurements of Surgical Drilling Force and Torque in Human Versus Artificial Femurs
	Journal of biomechanical engineering, 2012

[48]	Bandar Seri Iskandar 31750 Tronoh Perak Darul Ridzuan
	2012

[1]	Experimental analysis on drilling of super duplex stainless steel 2507 (SDSS 2507) using cryogenic LCO2 and MQL process Biomass Conversion and Biorefinery, 2022 DOI:10.1007/s13399-022-02536-8

[2]	Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications 2022 DOI:10.5772/intechopen.102864

[3]	Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.01.110

[4]	Determination of twist drill bits wear: the effect of the composition and structure of the steels Polish Journal of Chemical Technology, 2022 DOI:10.2478/pjct-2022-0016

[5]	Determination of twist drill bits wear: the effect of the composition and structure of the steels Polish Journal of Chemical Technology, 2022 DOI:10.2478/pjct-2022-0016

[6]	Determination of twist drill bits wear: the effect of the composition and structure of the steels Polish Journal of Chemical Technology, 2022 DOI:10.2478/pjct-2022-0016

[7]	Review on tool condition classification in milling: A machine learning approach Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2021.01.523

[8]	Effect of process parameters on drilling — An overview Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2021.02.574

[9]	Investigation of the Effect of Drill Bit Feature on Hole Surface Quality and Tool Wear DÜMF Mühendislik Dergisi, 2021 DOI:10.24012/dumf.1002180

[10]	Enhanced Heat Transfer Mechanism of Nanofluid MQL Cooling Grinding Advances in Chemical and Materials Engineering, 2020 DOI:10.4018/978-1-7998-1546-4.ch011

[11]	Studying the lubricity of new eco-friendly cutting oil formulation in metal working fluid Industrial Lubrication and Tribology, 2018 DOI:10.1108/ILT-11-2017-0330

[12]	Effect of Cutting Parameters on Dimensional Hole Quality and Burr Height for One-Shot Drilling of Hybrid Stacks SAE Technical Paper Series, 2016 DOI:10.4271/2016-01-2101

[13]	Chip Formation When Drilling AISI 316L Stainless Steel using Carbide Twist Drill Procedia Manufacturing, 2015 DOI:10.1016/j.promfg.2015.07.039

[14]	Effect of Different Lubricants on Small Hole Drilling in Ti-6Al-4V – A Taguchi-Grey Approach Applied Mechanics and Materials, 2013 DOI:10.4028/www.scientific.net/AMM.446-447.131

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies