Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Development of Aluminium Based Hybrid Metal Matrix Composites for Heavy Duty Applications"
written by M. Asif, K. Chandra, P.S. Misra,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Investigations on machinability characteristics of Cast Aluminum Alloy based (LM 26+ Graphite+ Fly ash) Hybrid metal Matrix Composites for automobile components
Materials and …, 2022
[2] Evaluation of Microstructures, Mechanical and Dry-Sliding Wear Performance of A356-(Fly Ash/SiCp) Hybrid Composites
International Journal of …, 2022
[3] The Role of Tetra Hybrid Reinforcements on the Behavior of Aluminum Metal Matrix Composites.
Journal of …, 2022
[4] Investigation of mechanical properties of SiC-reinforced seamless aluminium pipes fabricated using powder metallurgy followed by hot extrusion
International Journal of Materials Research, 2022
[5] Effect of particle size and weight fraction of SiC on the mechanical, tribological, morphological, and structural properties of Al-5.6 Zn-2.2 Mg-1.3 Cu composites …
Heliyon, 2022
[6] MECHANICAL AND WEAR CHARACTERIZATION OF ALUMINA/B4C/SiC REINFORCED Al-6061 ALLOY METAL COMPOSITES
… An International Journal, 2022
[7] The Mechanical properties and tribological behavior of Ni coated carbon fibers reinforced with Al 7075 metal matrix composites
Materials Today: Proceedings, 2022
[8] On this page
Journal of Nanomaterials, 2022
[9] Special Features of Structure Formation in a Composite Due to Sintering a Mixture of Elementary Powders of Al, Fe and Sn
Metal Science and Heat Treatment, 2022
[10] Aircraft Brake Pad Reconstruction and Fabrication
Global Congress on …, 2022
[11] Development of predictive models for wire electrical discharge machining of aluminium metal matrix composites by using regression analysis and neural network
Materials Today …, 2022
[12] An Insight into Mechanical and Metallurgical Behavior of Hybrid Reinforced Aluminum Metal Matrix Composite
Advances in Materials …, 2022
[13] Preparation and characterization of Al-TiO2-Mg composites through powder metallurgy
Materials Today …, 2022
[14] Effect of Silicon on the Properties of Sintered Alloys of (Al–Si)–Sn System
Inorganic Materials: Applied Research, 2022
[15] Влияние типа наполнителя на триботехнические свойства спечённого композита Al-20Sn
… конференции, 27–29 мая 2021 г …, 2021
[16] Особенности формирования структуры композита при спекании смеси элементарных порошков Al, Fe и Sn
Металловедение и термическая …, 2021
[17] Триботехнический эффект типа твёрдых добавок в сплав Al-Sn
… конференции, 27–29 мая 2021 г …, 2021
[18] Improvement in tribological properties of Al6061-Sic
Materials Today …, 2021
[19] Evaluation of mechanical and tribological properties of AL7075 hybrid metal matrix composite reinforced with fly ash and graphite
Materials Today: Proceedings, 2021
[20] Development of Car Piston Material from Aluminium alloy using Coconut shell ash as an additive
2021
[21] Corrosion resistance and passivation behavior of 3004 AlMnMg and 4044AlSi aluminum alloys in acid-chloride electrolytes
Materials Research Express, 2021
[22] Review on Powder Metallurgy: A Novel Technique for Recycling and Foaming of Aluminium-Based Materials
Powder Metallurgy and Metal Ceramics, 2021
[23] A re-investigation of mechanical properties of aluminium-based surface composites prepared by friction stir processing
2021
[24] Study of tribological properties on aluminium based hybrid composite developed through microwave energy
2021
[25] Morphology and Mechanical Properties of Al-TiC Nanocomposite Processed via Ball Milling Technique
2021
[26] Relationship between Wear Resistance under Dry Friction and Mechanical Properties of Sintered Al–Sn Composites
2021
[27] Mechanical and Tribological Properties of Al 6061 Alloy Reinforced with Gr-WC Particulates Using Powder Metallurgy Technique
2021
[28] Mechanical behaviour and tribological properties of cenosphere-copper composites using design of experiments
2021
[29] Mechanical Behaviour of E-Glass and Aluminium Hybrid Composite
2021
[30] Влияние скорости скольжения на интенсивность изнашивания спеченного гибридного композита (Al–12Si)–40Sn при сухом трении
2020
[31] A re-analysis of effect of various process parameters on the mechanical properties of Mg based MMCs fabricated by powder metallurgy technique
Materials Today: Proceedings, 2020
[32] INFLUENCE OF REINFORCEMENT TYPES ON MECHANICAL PROPERTIES OF HYBRID ALUMINUM ALLOY
2020
[33] Experimental analysis on wire spark erosion machining of aluminium hybrid metal matrix composites by Taguchi approach
2020
[34] Erosion-Corrosion Behavior of Al-20% Ni-Al2O3 Metal Matrix Composites by Stir Casting
2020
[35] DEVELOPMENT AND CHARACTERIZATION OF Al 6061/MoS2 MMC AND OPTIMIZATION OF PROCESS PARAMETERS FOR MACHINING WITH WEDM
2020
[36] Исследование взаимосвязи между износостойкостью при сухом трении и механическими свойствами спеченных композитов системы Al-Sn
Физика и химия обработки …, 2020
[37] Development and Characterization of AI 6061 MoS2 MMC and optimization of process parameters for machining with WEDM
2020
[38] Development of Grey-ANFIS Model for Wire Electrical Discharge Machining of Al-GNP Composites
2020
[39] A Study on the Tribological Properties of Al-AlN-Y 2 W 3 O 12 Hybrid Composites
2020
[40] Influence of the Sliding Velocity on the Wear Intensity of the Sintered Hybrid Composite (Al–12Si)–40Sn upon Dry Friction
2020
[41] Investigating the Adhesive Wear Properties of Aluminum Hybrid Metal Matrix Composites at Elevated Temperatures Using RSM Technique.
2019
[42] A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites
2019
[43] Influence of Primary B4C Particles and Secondary Mica Particles on the Wear Performance of Al6061/B4C/Mica Hybrid Composites
2019
[44] Investigating the Adhesive Wear Properties ofAluminum Hybrid Metal Matrix Composites atElevated Temperatures using RSM Technique
Tribology in Industry, 2019
[45] Effect of Nickel on Mechanical and Tribological Properties of Al 6082
2019
[46] Tribological and mechanical properties of AA6061 reinforced with SiC and graphite for automobile applications
2019
[47] Wear Studies on the Heat Treated Al6061-µSIC and Al6061-NSIC Metal Matrix Composites
2019
[48] MECHANICAL CHARACTERIZATION OF AL6061-TUNGESTEN CARBIDE COMPOSITES USING POWDER METALLURGY TECHNIQUE
International Journal of Engineering Applied Sciences and Technology, 2019
[49] THE INFLUENCE OF GLASSY CARBON AND ITS FORMS ON TRIBOLOGICAL PROPERTIES OF ALUMINIUM MATRIX COMPOSITES
Tribologia, 2019
[50] Study on Wear Properties of Al7075/SiC/Graphite Hybrid Composites
2019
[51] Mechanical Characterization of AL6061–Tungsten carbide composites using powder metallurgy technique
2019
[52] The Influence of Glassy Carbon ond Its Forms on Tribological Properties of Aluminium Matrix Composites
2019
[53] FRICTION STIR PROCESSING: SIMULATION AND EXPERIMENTAL CHARACTERIZATIONS OF ALUMINIUM METAL MATRIX COMPOSITES
2019
[54] Investigating the Adhesive Wear Properties of Aluminum Hybrid Metal Matrix Composites at Elevated Temperatures Using RSM Technique
Tribology in …, 2019
[55] Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding
2018
[56] Metal Matrix Composites: Wetting and Infiltration
2018
[57] Experimental Investigation of Wear Properties of Aluminium LM6-Al2O3-SiC Metal Matrix Composite
2018
[58] Effect of Copper Alloying and Reinforcement Percentage on the Microstructure-Tribological Aspects of the Aluminium Alloy Composites
Materials Today: Proceedings, 2018
[59] Mechanical and tribological behaviour of molten salt processed self-lubricated aluminium composite under different treatments
Materials Research Express, 2018
[60] An investigation on the tribological characteristics of Al 7075 based single and hybrid nanocomposites
Materials Today: Proceedings, 2018
[61] Effect of SiC Reinforcement on Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite
IOP Conference Series: Materials Science and Engineering, 2018
[62] Mechanical and Corrosion Behavior of Al-Ni-Sic Metal Matrix Composites by Powder Metallurgy
Materials Today: Proceedings, 2018
[63] Effect of SiC and Al2O3 particles addition to AA 2900 and AA 2024 MMC's synthesized through microwave sintering
Materials Today: Proceedings, 2018
[64] Metal Matrix Composites
Springer Nature, 2018
[65] Influence of reinforcements in friction stir processed magnesium alloys: Insight in medical applications
Materials Research Express, 2018
[66] Wear of Composites
Metal Matrix Composites, 2018
[67] Mechanical and Tribological Characterization Nitrided Al-7075/Al2O3 Metal Matrix Composites
2018
[68] A SIGNIFICANT REASSESS ON PERFORMANCE AND MACHINING OF METAL MATRIX COMPOSITES
2017
[69] Optimization of machining parameters of Aluminium based hybrid composites using Gray Relation Analysis
Materials Today: Proceedings, 2017
[70] Corrosion polarization behavior and microstructural analysis of AA1070 aluminium silicon carbide matrix composites in acid chloride concentrations
2017
[71] Effect of wear parameters on dry sliding behavior of Fly ash/Sic Particles Reinforced AA 2024 Hybrid Composites
Materials Research Express, 2017
[72] A Comprehensive Study of Aluminum Based Metal Matrix Composites: Challenges and Opportunities
2017
[73] Dry sliding wear behavior of TiC–AA7075 metal matrix composites
2016
[74] Microstructure and Hardness Studies of Magnesium-Aluminum Alloy and Fused Silica Particulate Composite
International Journal for Ignited Minds, 2016
[75] Study of Dispersoid Content and Chill Effect for Improved Mechanical Properties of Aluminum Alloy Composite
International Journal for Ignited Minds, 2016
[76] A review on the intensification of metal matrix composites and its nonconventional machining
Science and Engineering of Composite Materials, 2016
[77] Al6061 Hybrid Metal Matrix Composite Reinforced with Alumina and Molybdenum Disulphide
Advances in Materials Science and Engineering, 2016
[78] Processing methods and property evaluation of Al2O3 and SiC reinforced metal matrix composites based on aluminium 2xxx alloys
2016
[79] Multi-objective Optimization of Mechanical Properties of Aluminium 7075-Based Hybrid Metal Matrix Composite Using Genetic Algorithm
Advances in 3D Printing & Additive Manufacturing Technologies, 2016
[80] Production of Al-SiC-TiC hybrid composites using pure and 1056 aluminum powders prepared through microwave and conventional heating methods
Journal of Alloys and Compounds, 2016
[81] Corrosion behaviour of thermal cycled aluminium hybrid composites reinforced with rice husk ash and silicon carbide
Journal of King Saud University - Engineering Sciences, 2016
[82] Processing methods and property evaluation of Al 2 O 3 and SiC reinforced metal matrix composites based on aluminium 2xxx alloys
2016
[83] Fabrication of Al–SiC–B 4 C metal matrix composite by powder metallurgy technique and evaluating mechanical properties
Perspectives in Science, 2016
[84] Dry Sliding Wear Behaviour of Aluminium Alloy 6061-Redmud Metal Matrix Composites by Stir Casting Method
IJCTA, 2016
[85] Al-Mg based hybrid metal matrix composite reinforced with graphite and sic-preparation, Mechanical Behaviours Test and Microstructure Analysis
2016
[86] Fabrication of Al–SiC–B4C metal matrix composite by powder metallurgy technique and evaluating mechanical properties
Perspectives in Science, 2016
[87] Evaluation of mechanical and corrosive properties of aluminium AA7075 metal matrix composites
2016
[88] OPTIMIZATION TECHNIQUE TO STUDY DRY SLIDING WEAR BEHAVIOR OF ALUMINIUM ALLOY 2218 BASED SELF LUBRICATING COMPOSITE MATERIALS
IJARIIE, 2015
[89] Dry Sliding Wear Behavior of Tic-AA7075 Metal Matrix Composites
2015
[90] Tribological and Mechanical Characterization of Al-Ni-Sic Metal Matrix Composites
2015
[91] Mechanical and Tribological Performance of Aluminium Matrix Composite Reinforced with Nano Iron Oxide (Fe3O4)
Composite, Hybrid, and Multifunctional Materials, Volume 4. Springer International Publishing, 2015
[92] Study of Microstructure and Mechanical Behavior of Aluminum/Garnet/Carbon Hybrid Metal Matrix Composites (HMMCs) Fabricated by Chill Casting Method
Journal of Materials Science and Chemical Engineering, 2015
[93] A Survey of Aluminium Metal Matrix Composites Using Powder Metallurgy
International Journal of Advanced Research Trends in Engineering and Technology, 2015
[94] Experimental Investigations on Mechanical Properties of Hot Extruded Al-TiO2-Gr Hybrid Composites
2015
[95] Study of Dispersoid Content and Chill Effect for Improved Mechanical Properties of Aluminum-Garnet-Carbon Hybrid Metal Matrix Composites
2015
[96] A review on the mechanical properties, tribological behavior and the microstructural characterization of Aluminium metal matrix composites (AMMCs).
International Journal of Scientific & Engineering Research, 2015
[97] Experimental Investigation of aluminum doping crumb rubber/epoxy composite in reciprocating motion
Journal of Communications Technology, Electronics and Computer Science, 2015
[98] OPTIMIZATION TECHNIQUE TO STUDY DRY SLIDING WEAR BEHAVIOR OF ALUMINIUM ALLOY 2218 BASED SELF LUBRICATING COMPOSITE …
International Journal Of Advance Research And Innovative Ideas In Education, 2015
[99] Dry sliding wear behaviour of MWCNT reinforced commercial purity aluminiumcomposite
2014
[100] A Review on Sliding Wear Behaviour of Aluminium Matrix Composites with Hybrid Reinforcements for Automotive Applications
Tribology Online, 2014
[101] MECHANICAL AND TRIBOLOGICAL BEHAVIOUR OF ALUMINIUM METAL MATRIX COMPOSITES USING POWDER METALLURGY TECHNIQUE—A REVIEW
2014
[102] Characteristics of Aluminum Hybrid Composites
International Journal of Materials and Metallurgical Engineering, 2014
[103] EXPERIMENTAL ANALYSIS OF THE WEAR BEHAVIOR OF HYBRID METAL-MATRIX COMPOSITES OF LM25Al WITH EQUAL VOLUMES OF SiC+ TiO2
Materiali in tehnologije, 2014
[104] A Review on Fabrication & Characterization of Hybrid Aluminium Metal Matrix Composite
International Journal, 2014
[105] Sliding wear of LM25 aluminium alloy with 7.5% SiC+2.5% TiO2 and 2.5% SiC+7.5% TiO2 hybrid composites
Journal of Composite Materials, 2014
[106] Mechanical and tribological behavior of aluminum metal matrix composites using powder metallurgy technique-a review
2014
[107] PERFORMACE INVESTIGATION OF CRYOGENICALLY TREATED PISTON FOR WEAR AND HEAT DISTRIBUTION
2014
[108] Mechanical and Tribological Behaviour of Aluminium Metal Matrix Composites using Powder Metallurgy Technique—A Review.
2014
[109] Tribološko ponašanje hibridnih kompozita sa A356 matricom
2013
[110] Tribological behavior of hybrid (LM25Al+ SiC+ TiO2) metal matrix composites
Procedia Engineering, 2013
[111] A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis
Materials & Design, 2013
[112] Sliding wear of LM25 aluminium alloy with 7.5% SiC+ 2.5% TiO2 and 2.5% SiC+ 7.5% TiO2 hybrid composites
Journal of Composite Materials, 2013
[113] Research Article Effect of Addition of Fine SiC Particles on the Dry Sliding Wear Behaviour of Extruded 2014 Al-Alloy
International Scholarly Research Notices, 2013
[114] Effect of extrusion on the microstructure and properties of 2014–based particulate composites
International Journal of Microstructure and Materials Properties, 2013
[115] Tribological Behavior of Hybrid (LM25Al+ SiC+ TiO 2) Metal Matrix Composites
Procedia Engineering, 2013
[116] Investigation of wear behaviour of Al+ Cu powder preforms.
AK Tiwari, MTK, M Choubey, RK Ranjan - iosrjen.org, 2012
[117] Effect of addition of fine SiC particles on the dry sliding wear behaviour of extruded 2014 Al-alloy
ISRN Tribology, 2012
[118] A Review on Machining and Tribological Behaviors of Aluminium Hybrid Composites
Procedia Engineering, 2012
[119] Investigation of wear behaviour of Al+ Cu powder performs
[120] Mechanical Investigation of Heat-Treated Al-Alloy Reinforced with Antimony
[121] Abhijeet Sethi, Siddhartha Das & Karabi Das
J Sethi
[122] CHARACTERIZATION OF Al 6061/MoS2 MMC AND OPTIMIZATION OF PROCESS PARAMETERS FOR
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top