Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Experimental Methods of Determining Fracture Toughness of Fiber Reinforced Polymer Composites under Various Loading Conditions"
written by M.S. Sham Prasad, C.S. Venkatesha, T. Jayaraju,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Review on natural plant fibres and their hybrid composites for structural applications: Recent trends and future perspectives
Composites Part C: Open Access, 2022
[2] A review on the multi-scale simulation of Z-pinned composite laminates
Composite Structures, 2022
[3] Dynamic fracture toughness prediction of fiber/epoxy composites using K-nearest neighbor (KNN) method
Handbook of epoxy/fiber …, 2022
[4] Influence of moisture absorption on physico-chemical properties of natural fiber-based hybrid composites
Aging Effects on Natural …, 2022
[5] Delamination and Tensile Effect of Fine z-Binder Reinforced on Fiberglass/Polyester Composite for Aerospace Applications
Tiburcio, A Lira-Martínez… - Next Generation Fiber …, 2022
[6] Failure Modes in Fiber Reinforced Composites and Fracture Toughness Testing of FRP
… in Fatigue and Fracture Testing and …, 2022
[7] Manufacturing and Characterization of Continuous Nanofiber-Reinforced Composites
2022
[8] EXPERIMENTATION FOR FLEXURAL STRENGTH AND FRACTURE TOUGHNESS ON CARBON AND GLASS FIBER SELF-HEALING COMPOSITES WITH …
… An International Journal, 2021
[9] Fracture Toughness of the Natural Fiber‐Reinforced Composites: A Review
Mechanical and …, 2021
[10] Preparation and incorporation of multi-functional carbon nano materials into fiber reinforced polymeric composites
2021
[11] Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method
International Journal of Engineering, 2021
[12] MODE II FRACTURE TOUGHNESS OF HELICAL MULTI-WALLED CARBON NANOTUBE REINFORCED CARBON FIBER/EPOXY COMPOSITES
The 2nd International …, 2021
[13] Análisis de falla en modo mixto I y II bajo cargas cuasi-estáticas y dinámicas por impacto en un compuesto de reparación aeronáutica
2021
[14] Influence of Precracking Techniques on Fracture Toughness of Carbon-Carbon Composites
International Journal of Integrated Engineering, 2021
[15] ModeI fracture toughness of Carbon/glass hybrid comopsite
Wazery - International Journal of Engineering, 2021
[16] Study of mode II interlaminar fracture toughness of laminated composites of glass and jute fibres in epoxy for structural applications
Functional …, 2021
[17] Improved mechanical performance and unique toughening mechanisms of UDM processed epoxy‐SiO2 nanocomposites
Polymer …, 2021
[18] Stack fabric felting to get PCM GIIc improvement and LVI tolerance
2021
[19] Experimental investigation on Mode-I fracture toughness of Carbon-Carbon composites fabricated by preformed yarn method
2021
[20] Experimental investigation of mixed mode fracture toughness of glass fiber/epoxy laminates with sea water absorption
2021
[21] Enhancement of impact toughness and damage behaviour of natural fibre reinforced composites and their hybrids through novel improvement techniques: A critical …
2021
[22] Estimation of fracture toughness (KIC) using Charpy impact test for Al6061T6 and Al7075T6 alloys subjected to corrosion
2021
[23] Fracture Characteristics and Energy Dissipation of Textile Bamboo Fiber Reinforced Polymer
2021
[24] Fracture Toughness of the Natural Fiber-Reinforced Composites: A Review
2021
[25] FRACTURE RESISTANCE OF COMPOSITE STRUCTURS FROM HEMP BIO-FIBERS
2021
[26] DETERMINATION OF FRACTURE TOUGHNESS AND STRAIN ENERGY RELEASE RATE FOR BASALT/EPOXY COMPOSITES
2020
[27] Mechanical behavior and fracture toughness characterization of high strength fiber reinforced polymer textile composites
2020
[28] THREE-DIMENSIONAL MULTIFUNCTIONAL WOVEN COMPOSITES CONTAINING THROUGH-THICKNESS METAL FILAMENTS
2020
[29] Experimental and numerical investigation of the effects of porosity on the in-plane shear properties of CFRPs using the V-notched rail shear test method
2020
[30] Sensor integration within composite structures for continuous load monitoring
2020
[31] Improvement of interlaminar fracture toughness of phenolic laminates interleaved with electrospun polyvinyl butyral nanofibers
2020
[32] Mode-I Fracture Toughness Analysis of n-HAPs Filled Dental Restorative Composites
2020
[33] Nonlinear XFEM Modeling of Mode II Delamination in PPS/Glass Unidirectional Composites with Uncertain Fracture Properties
2020
[34] A Study of the Interlaminar Fracture Toughness of Unidirectional Flax/Epoxy Composites
2020
[35] Experimental and Finite Element Analysis of Fracture Parameters of woven Glass/Epoxy Composite
2020
[36] Experimental Determination of Fracture Toughness of Woven/Chopped Glass Fiber Hybrid Reinforced Thermoplastic Composite Laminates
2020
[37] Glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode (I/II) load using FPB specimen
Frattura ed Integrità …, 2020
[38] Suppressing Delamination Through Vertically Aligned Carbon Nanotubes (VACNT) Interleaves
2020
[39] Comprehensive study of unidirectional flax/epoxy composites; an evaluation of material properties and fracture behavior
2020
[40] Low-Temperature Effects on Sandwich Composites Under Low-Velocity Impact
2019
[41] Plasma Surface Functionalization of AFP Manufactured Composites for Improved Adhesive Bond Performance
2019
[42] Determination of mode I dynamic fracture toughness of IM7-8552 composites by digital image correlation and machine learning
2019
[43] Mode I fracture toughness of fiber-reinforced polymer composites: A review
2019
[44] Phase structure and fracture toughness of the polyethersulfone-modified bismaleimide resin
2019
[45] Tailoring interfacial interactions in fiber reinforced polymeric composites by the electrospray deposition of waterborne carbon nanotubes
2019
[46] An experimental study on interfacial fracture toughness of 3-D printed ABS/CF-PLA composite under mode I, II, and mixed-mode loading
2019
[47] Automated monitoring of the crack propagation in mode I testing of thermoplastic composites by means of digital image correlation
2019
[48] Neuartige amphiphile Blockcopolymere basierend auf kettenverlängerten Polyestern für duromere Anwendungen
2019
[49] Effect of Fibre Orientation on the Mixed-Mode Fracture Toughness of the Jute Fibre Reinforced Epoxy Composite
2019
[50] Process-structure-properties of additively manufactured continuous carbon fiber reinforced thermoplastic composite
2019
[51] Simulazioni numeriche e validazione sperimentale di modelli di Crashworthiness su componenti in tessuto CFRP
2019
[52] Simultaneous load and structural monitoring of a carbon fiber rudder stock: Experimental results from a quasi-static tensile test
2019
[53] Toughening and enhancing mechanical and thermal properties of adhesives and glass-fiber reinforced epoxy composites by brominated epoxy
2019
[54] Experimental Investigations on Failure of Silicon Adhesive in Thermal Protection System
2018
[55] Tecniche Modellazione FEM per correlazione numerico Sperimentale di Materiali Compositi
Thesis, 2018
[56] Experimental Investigations of Static and Fatigue Crack Growth in Sandwich Structures with Foam Core and Fiber-Metal Laminates Face Sheets
2018
[57] Experimental Investigation on Critical Energy Release Rate for an Asymmetric Four Point Bending
2018
[58] Interlaminar Fracture Properties of Bamboo
The Fracture Mechanics of Plant Materials, 2018
[59] Fracture Toughness and Shear Strength of the Bonded Interface Between an Aluminium Alloy Skin and a FRP Patch
Journal of The Institution of Engineers (India): Series C, 2018
[60] Model verification of material properties of wound composite rods in tensile loading
Journal of Industrial Textiles, 2018
[61] Experimental and micromechanical modeling of fracture toughness: MWCNT-reinforced polypropylene/glass fiber hybrid composites
Journal of Thermoplastic Composite Materials, 2018
[62] Studies on the performance of multi-phased carbon/epoxy composites with nanoclay and multi-walled carbon nanotubes
Multiscale and Multidisciplinary Modeling, Experiments and Design, 2018
[63] Investigating the contribution of geometrical parameters and immersion time on fracture toughness of jute fabric composites using statistical techniques
2018
[64] Influence of fibre orientation and thickness on the response of CFRP composites subjected to high velocity impact loading
Advances in Materials and Processing Technologies, 2018
[65] Effect of deoxidation process on inclusion and fatigue performance of spring steel for automobile suspension
Metallurgical and Materials Transactions B, 2018
[66] Intra-Laminar Fracture Toughness of Glass Fiber Reinforced Polymer By Using Theory, Experimentation and FEA
IOP Conference Series: Materials Science and Engineering, 2018
[67] Nanowire Reinforcements for Improving the Interlaminar Properties of Textile Composites
Blast Mitigation Strategies in Marine Composite and Sandwich Structures, 2018
[68] Studies on Fracture Features and Fracture Toughness of CFRP Composites Fabricated by Resin Infusion Technique
Advances in Structural Integrity, 2018
[69] The attenuation of ultrasonic vibrations in polymers and polymer composites, minimal dimensions of the determining defects
2018
[70] 이종 복합소재 접합 적용에 따른 Hat-type 구조물의 구조해석에 관한 연구
2018
[71] Additive Manufacturing with Carbon Nanotube Enriched Acrylonitrile Butadiene Styrene
2018
[72] Design of composite structures using advanced numerical tools
Manufacturing Technology, 2018
[73] ANOVA and Response Surface Methodology for the Optimization of Fracture Toughness parameters on Jute Fabric-Epoxy composites using SENB specimens
Materials Today …, 2017
[74] Mode I Intralaminar Fracture Toughness in Carbon Fibre Rein-forced Polyvinylidene Fluoride (PVDF)
THE 5th STUDENT SYMPOSIUM ON MECHANICAL AND MANUFACTURING ENGINEERING, 2017
[75] Synthesis and Flexural Strength of Carbon Fiber Reinforced Epoxy Matrix Composite
International Journal for Research in Applied Science & Engineering Technology (IJRASET), 2017
[76] Natural fiber textile composite engineering
2017
[77] Testing Methods for Composite Materials
2017
[78] A review on mode-I interlaminar fracture toughness of fibre reinforced composites
Journal of Physics: Conference Series, 2017
[79] Experimental Investigations on Fracture Toughness of Sandwich Beams with Foam Core and FML face sheets
11TH INTERNATIONAL CONFERENCE ON COMPOSITE SCIENCE AND TECHNOLOGY, 2017
[80] Weak bond detection in composites using highly nonlinear solitary waves
Smart Materials and Structures, 2017
[81] Experimental study on mode I fracture of fibredux unidirectional prepeg
AIP Conference Proceedings, 2017
[82] Evaluating Embedded Heater Bonding for Composites
2017
[83] Determination of mode I & II strain energy release rates in composite foam core sandwiches. An experimental study of the composite foam core interfacial fracture …
Composites Part B: Engineering, 2017
[84] MODE II+ III DELAMINATION BEHAVIOUR OF FLAX FABRIC REINFORCED POLYMER COMPOSITE
Thesis, 2017
[85] NATURAL & APPLIED SCIENCES
2017
[86] Neue Harzsysteme für Faserverbundwerkstoffe
2017
[87] The Effect of Particle Size and Functionalisation on Electro-thermo-mechanical Properties of Graphene-enhanced Epoxy and Carbon Fibre Epoxy Nano-Composites
Thesis, 2017
[88] Investigation of fatigue failure in composite versus steel coiled tube for application in mine site drilling
2017
[89] Flexural strength of polypropylene fiber reinforced PMMA
2017
[90] Low-velocity impact performance of carbon fiber-reinforced plastics modified with carbon nanotube, nanoclay and hybrid nanoparticles
Journal of Reinforced Plastics and Composites, 2017
[91] EVALUATION OF STRAIN ENERGY RELEASE RATE OF EPOXY GLASS FIBRE LAMINATE (MODE-I)
2017
[92] Determination of Mode-I Fracture Toughness of Epoxy-Glass Fibre Composite Laminate
Procedia Engineering, 2017
[93] Effect of water absorption on Mode I interlaminar fracture toughness of flax/basalt reinforced vinyl ester hybrid composites
Composite Structures, 2017
[94] Flexural Strength of Poly Propylene Fiber Reinforced PMMA
International Journal of Pharmaceutical Science Invention, 2017
[95] An experimental investigation of multi-functional z-pinned carbon-epoxy composites
2016
[96] Studies on effect of pre-crack length variation on Inter-laminar fracture toughness of a Glass Epoxy laminated composite
IOP Conference Series: Materials Science and Engineering, 2016
[97] ТРЕЩИНОСТОЙКОСТЬ СЛОИСТЫХ ПОЛИМЕРНЫХ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ (обзор)
2016
[98] Deformación y fractura de una resina epóxica reforzada con fibra de algodón
2016
[99] Structural health monitoring of carbon-material-reinforced polymers using electrical resistance measurement
International Journal of Precision Engineering and Manufacturing Manufacturing-Green Technology, 2016
[100] Nanowire reinforcement of woven composites for enhancing interlaminar fracture toughness
2016
[101] Delamination fracture toughness of UHMWPE fibers/polyurethane laminates interleaved with carbon nanotube‐reinforced polyurethane films
Polymers for advanced technologies, 2016
[102] A new method for testing composite materials under mode III fracture
Journal of Composite Materials, 2016
[103] Improved Mode I fracture resistance of CFRP composites by reinforcing epoxy matrix with recycled short milled carbon fibre
Construction and Building Materials, 2016
[104] Environmental aging effect on interlaminar properties of graphene nanoplatelets reinforced epoxy/carbon fiber composite laminates
Journal of Reinforced Plastics and Composites, 2016
[105] Analysis of Particle Influence on Energy Release Rate of CSM E-Glass/Epoxy Composite Laminates
2016
[106] Fracture characterization of polymer composites
2016
[107] Determination of Stress Intensity Factor of Banana Fibre Reinforced Hybrid Polymer Matrix Composite Using Finite Element Method
Periodica Polytechnica Mechanical Engineering, 2016
[108] Kelakuan delaminasi komposit laminat hibrid anyaman gentian mengkuang/gentian asli sutera/epoksi
2016
[109] Composite Failures: A Comparison of Experimental Test Results and Computational Analysis Using XFEM
2016
[110] Mode II delamination of woven mengkuang fiber/woven silk laminated hybrid composites
2016
[111] NUMERICAL AND EXPERIMENTAL STUDY OF THE MODE І INTERLAMINAR FAILURE OF CHOPPED CARBON FIBER TAPE REINFORCED …
2016
[112] Numerical and experimental study of the mode i interlaminar failure of chopped carbon fiber tape reinforced thermoplastics
2016
[113] An experimental investigation of multi-functional z-pinned carbonepoxy composites
2016
[114] Interfacial properties in the CFRP and CFRP-Ti composites under hygrothermal conditions
2016
[115] Interfacial properties in the CFRP and CFRP‑Ti composites under hygrothermal conditions
Doctoral thesis, Nanyang Technological University, Singapore, 2016
[116] Developing Short Milled Carbon Fibre Modified Toughened Epoxy Matrix for Superior and Inexpensive infrastructural CFRP Laminates
2016
[117] Tough natural-fibre composites
2015
[118] A Computational Modeling Approach of Fracture-Induced Acoustic Emission
2015
[119] Weak bond detection in composites using solitary waves
2015
[120] A methodology to assess damage tolerance of composite structures by fea simulation technique
2015
[121] Mode II Fracture toughness of Thin Film Epoxy Modified with Nano-Block Copolymers
2015
[122] Viability Of A Rapid Temporary Repair Of Composite Sandwich Panels
2015
[123] Рудштейн Роман Ильич
2015
[124] Finite-Element Modeling of a Damaged Pipeline Repaired Using the Wrap of a Composite Material
Mechanics of Composite Materials, 2015
[125] On the Processing and Properties of Clay/Polymer Nanocomposites CPNC
Latin American Journal of Solids and Structures, an ABCM Journal, 2015
[126] Synthesis and characterization of a biocomposite derived from banana plants (Musa cavendish)
2015
[127] Unidirectional Cordenka Fibre-Reinforced Furan Resin Full Biocomposite: Properties and Influence of High Fibre Mass Fraction
Journal of Composites, 2015
[128] Modeling Unidirectional Composite Laminates Using XFEM
2015
[129] Optimization of interlaminar shear strength behavior of anodized and unanodized ARALL composites fabricated through VARTM process
International Journal of Material Forming, 2015
[130] Методы определения межслоевой трещиностойкости слоистых материалов
2015
[131] Mixed Mode (I-II) Delamination Fracture Criteria for IM7-G/8552 Intermediate Modulus Carbon/Epoxy Composite Laminate
ProQuest Dissertations Publishing, 2014
[132] A mixed-mode (I-II) fracture criterion for AS4/8552 carbon/epoxy composite laminate
ProQuest Dissertations Publishing, 2014
[133] DELAMINATION BEHAVIOUR AND EXPERIMENTAL VALIDATION OF GLASS FABRIC/EPOXY MATRIX AND CARBON FABRIC/EPOXY COMPOSITES IN MODE-1 LOADING
Mechanical Engineering: An International Journal , 2014
[134] Road Map for the Selection of Characteristic Parameters of Polymer Matrix Composites for Engineering Applications
JF Rahman, M Yunus, TMT Yezdani, A Ramakrishna - ijetae.com, 2014
[135] Assessment and Modification Strategies for Improved Interlaminar Properties of Advanced FRP Composites: A Review
Journal of Advanced Research in Manufacturing, Material Science & Metallurgical Engineering, 2014
[136] Flexural Strength of E-glass-reinforced PMMA
International Journal of Experimental Dental Science, 2014
[137] Development and characterization of fatigue resistant Aramid reinforced aluminium laminates (ARALL) for fatigue Critical aircraft components
IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2014
[138] Mode-I Fracture Analysis of Thermally Aged of Glass and Glass-Carbon Hybrid Composites
image, 2014
[139] Testing of Polymeric Materials
2014
[140] Novel experimental techniques for characterization of engineering materials with applications
2014
[141] DCB Interlaminar Fracture Toughness of Glass Fiber/Modified Epoxy Nano Composite Laminates
International Journal for Scientific Research & Development, 2014
[142] Gerichtet erstarrte Schichtstrukturen mit hierarchischem Aufbau
2014
[143] An experimental study on the interfacial characteristics of fiber reinforced polymeric composites enhanced with nano-scale materials
2014
[144] Study on the Mode I Interlaminar Fracture Toughness of Multi-Directional Composite Laminates
Advanced Materials Research, 2013
[145] PMMA, Impact strength, Silane treated E glass fiber.
IMPACT STRENGTH OF E-GLASS REINFORCED PMMA, 2013
[146] IMPACT STRENGTH OF E-GLASS REINFORCED PMMA
M Mathew, K Shenoy, KS Ravishankar - jemds.com, 2013
[147] Modeling of delamination in carbon/epoxy composite laminates under four point bending for damage detection and sensor placement optimization
2013
[148] Characterization of mode I disbonding behaviour of carbon/epoxy composites bonded with two adhesion qualities
2013
[149] Nonlinear XFEM modeling of delamination in fiber reinforced composites considering uncertain fracture properties and effect of fiber bridging
2013
[150] Mode II interlaminar fracture properties of Moso bamboo
Composites Part B: Engineering, 2013
[151] Damage quantification in fiber reinforced polymer composites using a hybrid non-destructive testing approach
2012
[152] Advanced Materials and Manufacturing (AMM) Research Group, School of Mechanical and Design Engineering, University of Portsmouth, Anglesea Road …
[153] KATONAI MŰSZAKI DOKTORI ISKOLA
Free SCIRP Newsletters
Copyright © 2006-2023 Scientific Research Publishing Inc. All Rights Reserved.
Top