Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Parametric Optimization of PMEDM Process using Chromium Powder Mixed Dielectric and Triangular Shape Electrodes"
written by Kuldeep Ojha, R. K. Garg, K. K. Singh,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.11, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Performance enhancement of microelectrical discharge machining using powder additives mixed dielectrics
2021
[2] Optimization of EDM Process Parameters: A Review of Technique, Process, and Outcome
2021
[3] Transition from EDM to PMEDM–Impact of suspended particulates in the dielectric on Ti6Al4V and other distinct material surfaces: A review
2021
[4] A Comparative Study of Electro-discharge Drilling Process Using Solid and Tubular Electrodes
2021
[5] Machinability of SUPERNI-800 during PMEDM using the Taguchi method
2021
[6] Powder mixed electric discharge machining–A review
2020
[7] Recent advances and perceptive insights into powder-mixed dielectric fluid of EDM
2020
[8] Advances in Abrasive Assisted EDM and Micro-EDM
2020
[9] A review on the performance of the materials by surface modification through EDM
2020
[10] On material removal and tool wear rate in powder contained electric discharge machining of die steels
2020
[11] Comparison of the Removal Rate in EDM Based on the Mixed Environment
2020
[12] Multi-response Optimization in PMSEDM Process Using Taguchi-Grey Method
2020
[13] Machinability performance of Chromium powder mixed EDM of AISI D2 Steel
2019
[14] Performance parameters characteristics of PMEDM: A review
2018
[15] Multi-objective Optimization of MWCNT Mixed Electric Discharge Machining of Al–30SiCp MMC Using Particle Swarm Optimization
Futuristic Composites, 2018
[16] OPTIMIZATION CHARACTERISTICS OF POWDER MIXED ELECTRICAL DISCHARGE MACHINING (PMEDM)
International Journal of Applied Engineering Research, 2018
[17] An approach for increasing the micro-hardness in electrical discharge machining by adding conductive powder to the dielectric
Materials Today: Proceedings, 2017
[18] 1.7 Techniques to Improve EDM Capabilities: A Review
2016
[19] Experimental Study of MRR, TWR, SR on SS 316 and AISI D2 steel using Aluminium Electrode on EDM
2016
[20] State of the art in powder mixed dielectric for EDM applications
Precision Engineering, 2016
[21] The study of using assistant electrode in wire electrical discharge machining of polycrystalline silicon
2016
[22] Studies on the Material Removal Rate of Al-SiC Composites Machined by Powder-Mixed EDM Technique
International Journal of Engineering and Technology (IJET), 2016
[23] Determination of Best Concentration of Powder to Be Mixed in Di-Electric Fluid of PMEDM
2016
[24] A Review on Current Trends in PM-EDM using Commercial Kerosene as Di-Electric Fluid
International Journal of Science, Engineering and Technology Research (IJSETR), 2016
[25] Enhancing electrical discharge machining performance through employment of titanium nanopowder mixed dielectric and severe plastic deformation of electrode …
2016
[26] International Journal of Advance Engineering and Research Development
2016
[27] Multi-attribute optimization of machining process parameters in powder mixed electro-discharge machining using TOPSIS and grey relational analysis
Engineering Science and Technology, an International Journal, 2015
[28] Effect of Powder Mixed Electric Discharge Machining (PMEDM) on Various Materials with Different Powders: A Review
International Journal for Innovative Research in Science and Technology, 2015
[29] Effects of chromium powder mixed in electrical discharge machining of AISI D2 hardened steels
2015
[30] Development and Experimental Study of Powder Mixed EDM for Cemented Carbide Work piece
Intl J Engg Sci Adv Research, 2015
[31] Nano-Finishing of Materials by Powder Mixed Electric Discharge Machining (PMEDM): A Review
Science of Advanced Materials, 2015
[32] Experimental investigation of machining characteristics of Titanium alloy (Ti-6Al-4V) by using EDM process
2015
[33] Development of mirror like surface characteristics using nano powder mixed electric discharge machining (NPMEDM)
The International Journal of Advanced Manufacturing Technology, 2015
[34] Engineering Science and Technology, an International Journal
2015
[35] Finite element modeling and analysis of powder mixed electric discharge machining process for temperature distribution and volume removal considering multiple …
International Journal of Modeling, Simulation, and Scientific Computing, 2014
[36] Finite element modeling and analysis of powder mixed electric discharge machining process for temperature distribution and volume removal considering multiple craters
International Journal of Modeling, Simulation, and Scientific Computing, 2014
[37] Finite element modeling and analysis of powder mixed electric discharge machining process for temperature distribution and volume removal considering multiple …
International Journal of Modeling, Simulation, and Scientific Computing, 2014
[38] Current Advanced Research Development of Electric Discharge Machining (EDM): A Review
SK Choudhary, RS Jadoun - ijrat.org, 2014
[39] Study on optimization and machining characteristics of electric discharge machining using powder suspension dielectric fluids
2012
Free SCIRP Newsletters
Copyright © 2006-2022 Scientific Research Publishing Inc. All Rights Reserved.
Top