Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Development of Iron Based Brake Friction Material by Hot Powder Preform Forging Technique used for Medium to Heavy Duty Applications"
written by Mohammad Asif, K. Chandra, P.S. Misra,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Tribological Characterization of Reinforced Fe Matrix Composites with Hybrid Reinforcement of C, Cu, and SiC Particulates
Crystals, 2022
[2] Effect of powder metallurgy process parameters on tribology and micro hardness of Al6063-nano Al2O3 MMCs
Materials Today …, 2022
[3] Iron Matrix Composites: Improving Tribological Behaviour with Functionalized Nano-Cu-Coated C/SiO2 Particles
… of the Indian Institute of Metals, 2022
[4] Experimental and Analytical Investigation of Aircraft Brake Pad Material Composition.
… Journal of Vehicle …, 2021
[5] PHYSICAL AND MECHANICAL CHARACTERISATION OF ASBESTOS-FREE PARTICULATE CERAMIC MATRIX COMPOSITES
Eski?ehir Teknik üniversitesi Bilim ve Teknoloji Dergisi B - Teorik Bilimler, 2021
[6] Investigation on the Wear Rate of W1 Tool Steel with Al2O3-TiB2 Coating Deposition by Plasma Spraying
2020
[7] Conventional and unconventional materials used in the production of brake pads–review
2020
[8] A re-analysis of effect of various process parameters on the mechanical properties of Mg based MMCs fabricated by powder metallurgy technique
2020
[9] Microstructure and tribological behavior of SPS processed Fe/Ti-15wt.% Cu-based metal matrix composites with incorporated waste Ti-chips
2020
[10] EFFECT OF HEAVY FRACTION ON HARDNESS AND MORPHOLOGY OF ALUMUNIUM-MARBLE POWDER METALURGY COMPOSITE
ARPN Journal of Engineering and Applied Sciences, 2019
[11] Tribological performance of heavy-duty functionally gradient friction material (Cu-Sn-Fe-Cg-SiC-Al2O3) synthesized by PM route
2019
[12] Optimisation of brake pedal linkage: a comparative analysis towards material saving using CAE tools
2019
[13] Effect of Waste-Derived Calcium Sulfate Additions on the Tribological Properties of Sintered Steel-Based Material
2019
[14] PHYSICO-MECHANICAL PROPERTIES OF IRON-MILLSCALE REINFORCED CERAMIC COMPOSITE
2018
[15] Otomobil Disk Fren Balatalarının Deneysel Yöntemlerle Karakterizasyonu ve Karşılaştırılması
Marmara Fen Bilimleri Dergisi, 2018
[16] Effect of natural anhydrite content on the microstructure and hardness of bronze-based powder metallurgy parts
Materials Today: Proceedings, 2018
[17] Tribological study of sintered iron based and copper based brake materials by pin-on-disc method
2018
[18] A retrofit for asbestos-based brake pad employing palm kernel fiber as the base filler material
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2018
[19] Influence of Braking Conditions on Tribological Performance of Copper-Based Powder Metallurgical Braking Material
Journal of Materials Engineering and Performance, 2018
[20] The Production and Characterization of B4C and Graphene Nanoparticle Reinforced Fe Based Brake Materials
8th International Advanced Technologies Symposium, 2017
[21] Low friction hybrid nanocomposite material for brake pad application
2017
[22] Synthesis and Characterisation of Ceramic Matrix Composites Reinforced with Iron Oxide Granules (FeO)
Usak University Journal of Material Sciences, 2017
[23] Synthesis and characterisation of iron millscale particles reinforced ceramic matrix composite
Journal of King Saud University - Engineering Sciences, 2017
[24] 释加才让, 曹静武, 任淑彬, 刘婷婷. 现代轨道交通刹车材料的发展与应用
2017
[25] Properties of Sintered Bronze-Graphite Containing Natural Anhydrite.
Key Engineering Materials, 2017
[26] Properties of Sintered Bronze-Graphite Containing Calcium Sulfate Derived from Waste Plaster Molds
Key Engineering Materials, 2017
[27] 现代轨道交通刹车材料的发展与应用
材料科学与工艺, 2017
[28] Advanced Materials with Natural Fibred Reinforced Aluminiu Composite for Automotive Brake Disc
2016
[29] Friction material (metal reinforcement) analysis of brake pad for light rail train system
2016
[30] Evaluation of properties for Hybrid Al-SiC-Carbon Fiber Reinforced Metal Matrix Composite for Brake Pads
International Conference on El ectrical, Electronics, and Optimization Techni ques (ICEEOT) , 2016
[31] Development and characterisation of iron millscale particle reinforced ceramic matrix composite
Journal of Taibah University for Science, 2016
[32] PHYSICAL CHARACTERISATION OF SILICA-MAGNESIA HYBRID-MATRIX COMPOSITE MATERIALS FOR FRICTION AND BRAKE APPLICATIONS
2016
[33] Mechanical Performance of Coir and Glass Fibre Reinforced Hybrid composite materials for Automotive Brake Pad
2015
[34] Composite Materials with Complex Compositions used in Vehicle Brake System: a Review
2015
[35] Laser treatment of dual matrix structured cast iron surface: Corrosion resistance of surface
Optics and Lasers in Engineering, 2015
[36] The Influence of Barium Carbonate on the Tribological Characteristics of Some Iron-based Friction Composites.
Advanced Engineering Forum, 2015
[37] Effect of SiC volume fraction and size on dry sliding wear of Fe/SiC/graphite hybrid composites for high sliding speed applications
Wear, 2014
[38] High-Speed Tribological and Mechanical Properties of Layered Fe/SiC Composites
Journal of Materials Engineering and Performance, 2014
[39] Study of Graphite Content and Sintering Temperature on Wear and Microstructure of Fe+ C Powder Metallurgy Preform
Global Journal of Researches In Engineering, 2014
[40] Characterization of Brake Pads by Variation in Composition of Friction Materials
Procedia Materials Science, 2014
[41] Effect of reinforcement type, size, and volume fraction on the tribological behavior of Fe matrix composites at high sliding speed conditions
Wear, 2014
[42] Tribological and micro/nano-structural characterization of some Fe-based sintered composites
International Journal of Materials Research, 2014
[43] Development and Characterisation of iron millscale
2014
[44] Development and Characterization of Coir Fibre Reinforced Composite Brake Friction Materials.
Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2013
[45] New natural fibre reinforced aluminium composite for automotive brake pad
International Journal of Mechanical and Materials Engineering, 2012
[46] New natural fibre reinforced composite brake friction material
Proceedings of Regional Tribology Conference 2011: RTC2011, 2011
[47] Conventional And Unconventional Materials Used In The Production Of Brake Pads
[48] INFLUENCE OF MILD STEEL PARTICLES ON THE PHYSICAL AND MECHANICAL CHARACTERISTICS OF CERAMIC MATRIX COMPOSITES
[49] REKAYASA LAJU AUS DAN KOEFISIEN GESEK KAMPAS REM YANG DIFABRIKASI DARI PHENOL FORMALDEHYDE SERBUK KAYU, COCOPEAT, SEKAM …
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top