"Effect of Fly Ash Content on Friction and Dry Sliding Wear Behavior of Glass Fiber Reinforced Polymer Composites - A Taguchi Approach"
written by S.R. Chauhan, Anoop Kumar, I. Singh, Prashant Kumar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Synthesis of Al LM25/TiB2 in-situ composites and investigation of its adhesive wear behavior
2019
[2] Investigation on sliding wear behaviour of UHMWPE filled basalt epoxy composites
2019
[3] Effect of Fiber Orientation on the Flexural Properties of Glass Fiber Reinforced, Epoxy-Matrix Composite
2019
[4] Structure and Properties of Epoxy/Fly Ash System: Influence of Filler Content and Surface Modification
2019
[5] Fabrication and Tribological Behavior of Epoxy Hybrid Composites
Synthesis and Tribological Applications of Hybrid Materials, 2018
[6] A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
2018
[7] Characterization of palm slag/waste tire dust reinforced polyester brake pad composite
AIP Conference Proceedings, 2018
[8] A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
"JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY", 2018
[9] International Journal of Modern Engineering and Research Technology
2018
[10] SOME STUDIES ON TRIBOLOGICAL AND CORROSION BEHAVIOUR OF COPPER FLY ASH COMPOSITE
2017
[11] Failure Detection Method of Polymer Composite Gears
Mechanics, Materials Science & Engineering, 2017
[12] FABRICATION AND CHARECTERIZATION OF MULTILAYER GFRP COMPOSITES WITH DIFFERENT ORIENTATIONS
2017
[13] Study on the Preparation and Tribological Properties of Fly Ash as Lubricant Additive for Steel/Steel Pair
Tribology Letters, 2017
[14] Mechanical Properties Investigation of Composite Material Under Different Parameters Variations
Al-Khwarizmi Engineering Journal, 2017
[15] Study of the elastic behavior of synthetic lightweight aggregates (SLAs)
ProQuest Dissertations Publishing, 2016
[16] Effect of Fly-Ash on Thermal & Mechanical Properties of Polystyrene Fly-Ash Composites
IJSRD -International Journal for Scientific Research & Development, 2016
[17] Significance of Energy Absorbing Layer in GFRP Composite on Flexural Response
2016
[18] Effect of Inorganic Fillers on the Friction Properties of Polyamide 66
2016
[19] Effect of Particulate Fillers on the Mechanical, Thermal, Moisture and Fire Performance of Unsaturated Isopthallic Polyester/Glass Fibre Reinforced Polymer …
2015
[20] Notice of Retraction A Taguchi with principal component analysis based approach for the assessment of the cutting parameters during drilling of GFRP composite
2015
[21] Analysis of abrasive wear behavior of PTFE composite using Taguchi's technique
Cogent Engineering, 2015
[22] Effect of Particulate Fillers on the Mechanical, Thermal, Moisture and Fire Performance of Unsaturated Isopthallic Polyester/Glass Fibre Reinforced Polymer Composites
polymer, 2015
[23] Investigation and Evaluation of Wear Characteristics of A Nonmetallic Spur Gear
Trends in Machine design, 2015
[24] Studies on Physical and Mechanical Properties of Silica Fume-Filled Nylon 66 Polymer Composites for Mechanical Components.
Polymers & Polymer Composites, 2015
[25] A Taguchi with principal component analysis based approach for the assessment of the cutting parameters during drilling of GFRP composite
Electrical, Electronics, Signals, Communication and Optimization (EESCO), 2015 International Conference on, 2015
[26] Wear Characteristics of Polymer-Based Composites
Mechanics of Composite Materials, 2015
[27] Investigation Of Mechanical Behaviour And Tribological Properties Of Coir And Sugarcane Bagasse Fibers Filled Epoxy Composites
2015
[28] Comparative Study on the Wear Properties of Fly Ash and Silica Fume Filled Nylon Composites.
Applied Mechanics & Materials, 2014
[29] Development and characterization of aluminium based metal matrix composites using fly ash and glass fiber by back pressure equal channel angular …
2014
[30] Tribology Studies and Microscopic Analysis of Polyester-Based Red Mud Polymer Composites
Journal of Advanced Microscopy Research, 2014
[31] Dynamic Mechanical Analysis and Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites
Advances in Tribology, 2014
[32] Carbon-Ceramic Composites for Friction Applications
Mechanics of Advanced Materials and Structures, 2014
[33] Taguchi method to optimize the micron and submicron size cenosphere particulates filled E‐glass fiber‐reinforced vinylester composites
Polymer Composites, 2014
[34] OPTIMIZATION OF PROCESS PARAMETERS OF PLASTIC INJECTION MOLDING FOR POLYPROPYLENE TO ENHANCE PRODUCTIVITY AND REDUCE TIME FOR DEVELOPMENT
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY, 2014
[35] Development of Epoxy Composite Filled with Micro Tungsten Disulphide Particles and its Mechanical Properties
Advanced Materials Research, 2014
[36] A Review on Sliding Wear Behaviour of Aluminium Matrix Composites with Hybrid Reinforcements for Automotive Applications
Tribology Online, 2014
[37] Epoxy/oil fly ash composites prepared through in situ polymerization: Enhancement of thermal and mechanical properties
Polymer Composites, 2014
[38] TENSILE AND FLEXURAL STRENGTH OF GLASS FIBER EPOXY COMPOSITES
International Conference on Advanced Materials and manufacturing Technologies (AMMT), 2014
[39] EVALUATION OF WEAR BEHAVIOR OF A NONMETALLIC SPUR GEAR
2014
[40] Comparative Study on the Wear Properties of Fly Ash and Silica Fume Filled Nylon Composites
2014
[41] Effect of fly ash concentration and its surface modification on fiber reinforced epoxy composite′ s mechanical properties
2013
[42] Friction and sliding wear characteristics study of submicron size cenosphere particles filled vinylester composites using Taguchi design of experimental technique
Journal of Composite Materials, 2013
[43] Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl ester Composites
Journal of Polymer & Composites, 2013
[44] Effect of Fly Ash Concentration and its Surface Modification on Fiber Reinforced Epoxy Composite's Mechanical Properties
P Shubham, SK Tiwari - ijser.org, 2013
[45] Study on mechanical and tribological behavior of cenosphere filled vinyl ester composites–a Taguchi method
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2013
[46] Study on mechanical and tribological behavior of cenosphere filled vinylester composites-A Taguchi method
2013
[47] INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET)
2013
[48] Tribological Properties of Fly Ash-Based Green Friction Products
Green Tribology, 2012
[49] Effect of Unsilanized and Silanized Fly Ash on Damping Properties of Fly Ash Filled Fiber Reinforced Epoxy Composite
2012
[50] Effect of micro size cenosphere particles reinforcement on tribological characteristics of vinylester composites under dry sliding conditions
Journal of Minerals and Materials Characterization and Engineering, 2012
[51] Optimization of dry sliding wear performance of ceramic whisker filled epoxy composites using Taguchi approach
Advances in Tribology, 2012
[52] Effect of micro-size cenosphere content on friction and dry sliding wear behavior of vinylester composites–A Taguchi method
Advanced Materials Research, 2012
[53] Three-Body Abrasive Wear Behaviour of Microfiller-Filled Carbon‐Epoxy Composites: A Factorial Design Approach
Instrumentation Science & Technology, 2011
[54] Tribological behaviour of aluminium/alumina/graphite hybrid metal matrix composite using Taguchi's techniques
2011
[55] Three-body abrasive wear behavior of microfillers filled carbon–epoxy composites: a factorial design approach
2011
[56] Effective Utilization of Industrial Waste (Flyash) to Enhance the Properties of Polymer Composites for Mechanical Components
1970