"Mechanical Properties of Fly Ash Filled High Density Polyethylene"
written by Iftekhar Ahmad, Prakash A. Mahanwar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Synthesis And Analysis of Grinding Wheel of Fly Ash Grinding Machine
International Engineering Research Journal
[2] Epoxy resin/fly ash composites: Effect of sonication time on thermo-mechanical behavior
[3] Characterization and utilization of coal fly ash: a review
2020
[4] The Effect of Fiber Sizes on Mechanical Properties of Millet Husk (Pennisetum glaucum) Fiber Filled High Density Polyethylene Composites
2020
[5] Critical and Rare Earth Elements: Recovery from Secondary Resources
2019
[6] AJ Csian OURNALOF HEMISTRY AJ Csian OURNALOF HEMISTRY
2019
[7] مقارنة بعض الخواص الميكانيكية لخلائط البولي إيثيلين‎
2019
[8] MECHANICAL AND ELECTRICAL PROPERTIES OF BISMUTH FILLED HIGH DENSITY POLYETHYLENE COMPOSITES
2019
[9] Leaching Behaviour of Fly Ash: A Review
2019
[10] Recovery of Rare Earth Elements from Coal Fly Ash: A Review
2019
[11] Tensile Modulus of Film Stacked Palm Fibers-LDPE Sheet Composites
2019
[12] Structure and Properties of Epoxy/Fly Ash System: Influence of Filler Content and Surface Modification
2019
[13] A brief review on fly ash and its use in surface engineering
AIP Conference Proceedings, 2018
[14] Study on Tensile Behavior of Fly Ash Reinforced Hybrid Polymer Matrix Composite
2018
[15] Composite material based on the polyethylene terephthalate polymer and modified fly ash filler
2018
[16] Investigation of properties of molded parts made of polyethylene with addition of ASH from bituminous coal
Composites Theory and Practice, 2018
[17] Environmental assessment and mechanical properties of acrylonitrile butadiene styrene (ABS) reinforced with fly ash filler
AIP Conference Proceedings, 2018
[18] The effect of particle size of fly ash (FA) on the interfacial interaction and performance of PVC/FA composites
Journal of Vinyl and Additive Technology, 2018
[19] Preparation and characterization of thermoplastic starch composites with fly ash modified by planetary ball milling
Carbohydrate Polymers, 2018
[20] Reinforcement of Lime Ash Particles in LDPE
2018
[21] Improvement of Tensile Properties of Recycled Low-Density Polyethylene by Incorporation of Calcium Carbonate Particles
2018
[22] Study the effect of the adding of Ash of Palm Fronds on the Mechanical Properties for High Density Polyethylene (HDPE)
2018
[23] Evaluation of Ohio Coal as Filler Material for Thermoplastic Composites
Dissertation, Ohio University, 2017
[24] Natural Rubber Modification For Upper Layer Of Rubberized Asphalt Paving Block AS Shock Absorber
2017
[25] Effect of Accelerated Weathering on the Compressive Strength for PMMA Nano Composites and PMMA Hybrids Nano Composites Used in Dental Applications
Engineering and Technology Journal, 2017
[26] Effect of Thermal Treatment on Mechanical Properties Rice Husk Ash Filled Tapioca Starch Composite
2017
[27] Effect on Mechanical Properties of Epoxy Hybrid Composites Modified with Titanium Oxide (TiO2) and Silicon Carbide (SiC)
2017
[28] Effect of Accelerated Weathering on the Compressive Strength for PMMA Nano Composites Used in Dental Applications. pdf
Engineering and Techology Journal, 2017
[29] Effect of Fly-Ash on Thermal & Mechanical Properties of Polystyrene Fly-Ash Composites
International Journal for Scientific Research & Development, 2016
[30] Design and Analysis of Grinding Wheel of Fly Ash Grinding Machine
International Journal of Science, Engineering and Technology Research, 2016
[31] General model for comparative tensile mechanical properties of composites fabricated from fly ash and virgin/recycled high‐density polyethylene
Polymer Engineering & Science, 2016
[32] Preparation, mechanical properties and fracture of the optimal surface modified alumina silicate based ceramic particles reinforced polymer composites
2016
[33] EFFECT OF FLY ASH FILLER QUANTITY ON ELECTRICAL PROPERTIES OF SILICONE RUBBER INSULATOR MATERIAL
ARPN Journal of Engineering and Applied Sciences, 2016
[34] Recycling of Fly Ash as an Energy Efficient Building Material: A Sustainable Approach
Key Engineering Materials, 2016
[35] A Review Study of Managed Disposal of Fly Ash
2015
[36] Effect of Particle Size and Concentration of Fly Ash on Properties of Polytrimethylene Terepthalate
International Conference on Chemical, Metallurgy and Material Science Engineering , 2015
[37] Assessment of the Use of Steel Slag and/or Air Pollution Control Devices Dust in theManufacturing of Fly Ash Bricks/Blocks
2015
[38] LUẬN ÁN TIẾN SĨ HÓA HỌC
2015
[39] Property evaluation of nanostructured fly ash-reinforced acrylonitrile butadiene styrene nanocomposites
Journal of Thermoplastic Composite Materials, 2015
[40] Effect of Particle Size and Concentration of Fly Ash on Mechanical Properties of Polyphenylene Oxide Composites
2015
[41] Effect of Oil Palm Ash on the Properties of Polypropylene/Recycled Natural Rubber Gloves/Oil Palm Ash Composites
BioResources, 2015
[42] Characterization of LDPE Reinforced with Calcium Carbonate—Fly Ash Hybrid Filler
Journal of Minerals and Materials Characterization and Engineering, 2014
[43] Studies on Mechanical Properties of Fly Ash Filled PPO Composite with Coupling Agent
2014
[44] Effect of Fiber Loading on the Mechanical Properties of Millet Husk Filled High Density Polyethylene Composites.
Applied Mechanics and Materials, 2014
[45] Rice Husk Silica-Efficient Bio Filler in High Density Polyethylene
PMS Begum, R Joseph, AR Jose - rspublication.com, 2014
[46] Study of Mechanical Properties and Characterization of the Composites Made From Oyster Shell Crystals, Barytes Along With Other Filler Materials
Journal of Mechanical Engineering, 2014
[47] Evaluation of properties of industrial waste filled polymer composites for automobile applications
Materials Science and Technology , 2014
[48] Structural and Mechanical Characterization of Sustainable Composites Based on Recycled and Stabilized Fly Ash
Materials, 2014
[49] Mechanical and thermal properties of fly ash filled ABS
2014
[50] Disposal and Utilization of Fly Ash to Protect the Environment
International Journal of Innovative Research in Science …, 2013
[51] Biopolymer-based thermoplastic mixture for producing solid biodegradable shaped bodies and its photo degradation stability
IOP Conference Series: Materials Science and Engineering. Vol. 50. No. 1. IOP Publishing, 2013
[52] Enhanced properties of fly ash–reinforced unsaturated polyester composites
International Journal of Materials Engineering Innovation, 2013
[53] Morphology and Mechanical Properties of HDPE/Bio-polymer as Compounding Materials
Advanced Materials Research, 2013
[54] Preparation and Property Evaluation of Aluminium alloy (6061) Reinforced with Bottom Ash Particulate composite (ALBAP Composite)
International Journal of Innovative Research in Science, Engineering and Technology, 2013
[55] Fundamental Technique of Pre-blending of Bio-matrix with Commercial HDPE
Applied Mechanics and Materials, 2013
[56] Review of Agro Waste Plastic Composites Production
Journal of Minerals and Materials Characterization and Engineering, 2013
[57] THE INFLUENCE OF CHEMICAL COMPOSITION OF MIXTURE ON THE MECHANICAL PROPERTIES OF FLY ASH CONCRETE
12th International Multidisciplinary Scientific GeoConference SGEM 2012, 2012
[58] Utilization Of Flyash As Filler In Hdpe/Flyash Polymer Composites: A Review
International Journal of Applied Engineering Research, 2012
[59] Effects of fly ash in composites fabricated by injection molding
Polymer Composites, 2012
[60] Effect of intumescent ammonium polyphosphate (APP) and melamine cyanurate (MC) on the properties of epoxy/glass fiber composites
Composites Part B: Engineering , 2012
[61] 재생 폴리에틸렌/비산회 분말 충전 복합체 제조와 기계적 물성, 내마모성 및 저속균열성장 저항성에 관한 연구
2011
[62] A Study on the Manufacturing, Mechanical Properties, Abrasion Resistance, and Slow Crack Growth Resistance of the Recycled Polyethylene/Fly Ash Composites
2011
[63] 粉煤灰改性通用热塑性树脂的研究进展
材料导报, 2011
[64] Halogen free flame retardants for Epoxy substrate in electronic applications
Electronic Manufacturing Technology Symposium (IEMT), 2010 34th IEEE/CPMT International, 2010
[65] Optimization of Compressive Strength for Fly Ash Building Bricks Using Taguchi Method