Studies on Al6061-SiC and Al7075-Al<sub>2</sub>O<sub>3</sub> Metal Matrix Composites

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1
Citations h5-index & Ranking*

Journals Menu

"Studies on Al6061-SiC and Al7075-Al₂O₃ Metal Matrix Composites"
written by G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj, M. S. Bhagyashekar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Optimization of Wire Electrical Discharge Machining Process Parameters for Al7075/Al2O3/SiC Composite Using Aspect Ratios of Taguchi Method, Taguchi-Pareto …
	Engineering Access, 2023

[2]	The impact of boron nitride (BN) on tribological behaviour of AZ84 magnesium matrix composites
	Materials Today …, 2022

[3]	Sliding wear response of ultrasonic-assisted stir-squeeze cast Al-Zn (-Mg) alloy/ZrO2p composite: wear mechanism and subsurface deformation
	Surface Topography: Metrology and …, 2022

[4]	Optimization of tribo-mechanical properties of boron carbide reinforced magnesium metal matrix composite
	Proceedings of the …, 2022

[5]	An investigation on the microstructure and mechanical properties of Al-Zn-Mg-Cu/Ti composite produced by compocasting
	International Journal of …, 2022

[6]	Mechanically alloyed high entropy alloys: existing challenges and opportunities
	Journal of Materials Research and …, 2022

[7]	Experimental Investigation and Prediction Analysis on Granite/SiC Reinforced Al7050 and Al7075 Using Hybrid Deep Neural Network Based Salp Swarm …
	Silicon, 2022

[8]	Production of AA1050/silica fume composite by bobbin tool-friction stir processing: Microstructure, composition and mechanical properties
	CIRP Journal of …, 2022

[9]	Effect of pin geometry and orientation on friction and wear behavior of nickel-coated EN8 steel pin and Al6061 alloy disc pair
	advances in materials …, 2022

[10]	Effect of wear debris on fretting fatigue crack initiation
	Friction, 2022

[11]	Moisture effects on vibration response of SMA particulate epoxy composite
	Australian Journal of …, 2022

[12]	Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites
	Materials Testing, 2022

[13]	An overview of the effect of stirrer design on the mechanical properties of Aluminium Alloy Matrix Composites fabricated by stir casting
	Zanco Journal of Pure and Applied Sciences, 2022

[14]	Effect of particle size on mechanical behavior of sugarcane bagasse ash reinforced AlSi10Mg alloy
	Materials Today …, 2022

[15]	Investigation of mechanical characteristics of SiC and flyash particle reinforced aluminium matrix composites
	Materials Today …, 2022

[16]	A critical review on mechanically alloyed high entropy alloys: processing challenges and properties
	Materials Research Express, 2022

[17]	Experimental investigation of wear properties of AA6061+ Al2O3 metal matrix composite fabricated by vacuum stir casting method
	Materials Today: Proceedings, 2022

[18]	Fabrication of aluminum based metal matrix composite using stir casting method and characterize its tribological properties
	Materials Today: Proceedings, 2022

[19]	MECHANICAL AND WEAR BEHAVIOR FOR ALUMINUM ALLOY REINFORCED WITH DUAL NANOPARTICULATE (TiO2+ SiO2)
	2022

[20]	Effect of powder metallurgy process parameters on tribology and micro hardness of Al6063-nano Al2O3 MMCs
	Materials Today …, 2022

[21]	Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites
	Silicon, 2022

[22]	Impact of Silicon Carbide Particles Weight Percentage on the Microstructure, Mechanical Behaviour, and Fractography of Al2014 Alloy Composites
	Advances in Materials …, 2022

[23]	Experimental analysis of Al-AlN-B4C hybrid composite material for automobile disk brake
	Materials Today …, 2021

[24]	An overview on the synthesis of aluminium matrix composites using stir casting technique
	Materials Today: Proceedings, 2021

[25]	Effect of SiC and Gr particles on the mechanical properties and dynamic characteristics of AA 7075 hybrid metal matrix composite
	Materials Today …, 2021

[26]	Study of mechanical properties and wear behavior of aluminum 6061 matrix composites reinforced with Hematite and Titania
	Materials Today: Proceedings, 2021

[27]	Effect of Wettability and Uniform Distribution of Reinforcement Particle on Mechanical Property (Tensile) in Aluminum Metal Matrix Composite—A Review
	Nanomaterials, 2021

[28]	Influence of heat treatment on tribological behavior of Al/ZrO2/fly ash hybrid composite
	Materials Today …, 2021

[29]	Micro-structural and mechanical characterization of AA2014/TiB2/Al2O3 hybrid composites
	AIP Conference …, 2021

[30]	A Study on Mechanical and Tribological Properties of Aluminum 7075 MMCS Reinforced with Silicon Carbide and Coconut Husk by Powder Metallurgy Process
	2021

[31]	Structural and suitability analysis of aluminium metal matrix composites for IC engine mountings
	Materials Today …, 2021

[32]	A comprehensive review of aluminium matrix composite reinforcement and fabrication methodologies
	Functional Composites …, 2021

[33]	The Influence of Structural Components of Diamond-Bearing Mineral Ceramic Abrasive Material on Its Cutting Ability and the Treated Surface Quality
	International Conference on Industrial …, 2021

[34]	ВЛИЯНИЕ СТРУКТУРЫ МИНЕРАЛОКЕРАМИЧЕСКОГО АБРАЗИВНОГО МАТЕРИАЛА НА ЭКСПЛУАТАЦИОННЫЕ ПАРАМЕТРЫ И МОРФОЛОГИЮ …
	… Серия: Технические науки, 2021

[35]	Synthesis and Characterization of Al
	2021

[36]	Mechanical properties of aluminium-graphene/carbon nanotubes (CNTs) metal matrix composites: advancement, opportunities and perspective
	2021

[37]	Study of tribological properties on aluminium based hybrid composite developed through microwave energy
	2021

[38]	Investigation on mechanical, tribological and microstructural properties of Al–Mg–Si–T6/SiC/muscovite-hybrid metal-matrix composites for high strength …
	2021

[39]	Effect of Hot Rolling on Physical and Mechanical Properties of Al 6061 Alloy-Based Metal Matrix Composite
	2021

[40]	Optimization of wear and friction parameters in Aluminum7075 hybrid composite
	2021

[41]	Mechanical study of Al 7050 and Al 7075 based metal matrix composites: A review
	2021

[42]	Investigation on mechanical properties of Al319–Al2O3–TiO2 reinforced hybrid metal matrix composites
	2021

[43]	Eggshell and rice husk ash utilization as reinforcement in development of composite material: A review
	2021

[44]	Fabrication methods of metal matrix composites (MMCs)
	2021

[45]	Effect Multiple Addition (TiO2 and Fly Ash) on Wear Behavior and Hardness of 2024 Al Alloy
	2021

[46]	Evaluation of mechanical properties of Al7029/flyash/WC hybrid composites developed by liquid metallurgy
	2021

[47]	A Review on the Significance of Hybrid Particulate Reinforcements on the Mechanical and Tribological Properties of Stir-Casted Aluminum Metal Matrix Composites
	2021

[48]	Experimental studies on the wear and mechanical properties of Al7075-B4C-Al2O3 composite
	2021

[49]	Investigation on Mechanical, Tribological and Microstructural properties of Al-Mg-Si-T6/SiC/Muscovite-hybrid metal-matrix composites for high strength …
	2021

[50]	Influence of Heat Treatment on Mechanical Characteristics of Al7075/Al2O3/TiC Hybrid Metal Matrix Composite
	2021

[51]	Microstructure and mechanical properties of AA7075/Al3Ni composites produced by compocasting
	2021

[52]	Synthesis and Mechanical Behavior of Ball-Milled Agro-Waste RHA and Eggshell Reinforced Composite Material
	2021

[53]	Elevated-temperature high-strength h-BN-doped Al2014 and Al7075 composites: Experimental and theoretical insights
	2021

[54]	Effect of Reinforment of Particles on the Mechanical Properties of Al6065-SiC, Al6065-Al2O3, Hybrid Composites by Modified Stir Casting Method
	2021

[55]	Mechanical, tribological and microstructural characterization of stir cast Al-6061 metal/matrix composites—a comprehensive review
	2021

[56]	Tribological Behaviour of AL7068-Alumina-B4C Hybrid Composites and Optimization with DEMATEL Technique
	2021

[57]	Effects of process parameters on additive manufacturing of aluminum porous materials and their optimization using response surface method
	Journal of Materials Research and Technology, 2021

[58]	Forming of metal-based composite parts
	CIRP Annals, 2021

[59]	Synthesis and Characterization of Al 7072-Al2O3 Metal Matrix Composites
	2021

[60]	Manufacturing techniques for metal matrix composites (MMC): an overview
	2020

[61]	Investigation of the Machinability of SiC Reinforced MMC materials produced by Molten Metal Stirring and Conventional Casting Technique in Die-Sinking Electrical …
	2020

[62]	Study of Thermal Properties of AA 6061and Thermal Analysis of a Fin and a Chip of AA 6061 based Particulate Metal Matrix Composites
	2020

[63]	Effect of B4C and waste porcelain ceramic particulate reinforcements on mechanical and tribological characteristics of high strength AA7075 based hybrid …
	2020

[64]	Effect of reinforcement and fabrication of Al6061 nanosilica composite prepared using single-and two-step methods
	2020

[65]	Influence of Milling Parameters on Surface Roughness of Al–SiC–B 4 C Composites
	2020

[66]	Research on deformation prediction and error compensation in precision turning of micro-shafts
	2020

[67]	Design and Development of the Front Wheel Hub for All-Terrain Vehicle (ATV)
	2020

[68]	The Machining Characteristics of the Al7075-B4C Nanocomposites Developed Using Ultrasonic Liquid Processor
	2020

[69]	Electro-discharge machining of metal matrix composites-a review
	2020

[70]	Investigation on Wear Behaviour of AA5052/SiC/Al2O3 Hybrid Composite Fabricated Using Stir Casting Process
	2020

[71]	Comparison of mechanical properties of Al6063 alloy with ceramic particles
	2020

[72]	Measurement of Friction and Wear in Aluminum Alloy Al7075/Sic & Gr Processed By Friction Stir Method
	2020

[73]	Friction and wear reduction properties of GNP nano-particles as nano-additive for Al-Si+ Al2O3 composite/Chromium plated steel tribopair
	2020

[74]	Appraisal of tribological properties of A356 with 20% SiC composites under dry sliding condition
	2020

[75]	Review on properties of aluminium metal matrix composites
	2020

[76]	Parametric analysis of tribological for gear materials behaviour and mechanical study of cobalt metal powder filled Al-7075 alloy composites
	2020

[77]	A Critical Review on Synthesis of Aluminum Metallic Composites through Stir Casting: Challenges and Opportunities
	2020

[78]	Design and development of the front wheel hub for All-Terrain Vehicle (ATV)/Himanshu Verma...[et al.]
	2020

[79]	Минералокерамический композиционный материал: синтез и фрикционные свойства
	2020

[80]	Mechanical & Tribological Behaviors of Aluminium Metal Matrix/Hybrid Metal Matrix Composites: A Review
	JOURNAL OF CRITICAL REVIEWS, 2020

[81]	Effect of ZrO2 Addition on Microstructure and Mechanical Properties of Al-Zn-Mg Alloy Matrix Composite
	2020

[82]	A Study on Mechanical Properties of Aluminium 7075 MMCs Reinforced with Nano Silicon Carbide and Tur Husk
	2020

[83]	A Review on Electrical, Thermal and Wear Behaviour of AL6061-Ag Composite
	Dogo Rangsang Research Journal, 2020

[84]	Dry sliding wear behaviour of Al6061–5% SiC—TiB2 hybrid metal matrix composites synthesized by stir casting process
	2020

[85]	Hardness and Wear Behavior of Al 6061/ZrC Composite Processed by Friction Stir Processing.
	2020

[86]	Tribological characteristics of TiO2 particles reinforced aluminum nanocomposites produced via liquid metallurgy techniques with ultrasonic vibrator
	2020

[87]	Optimization of machining process parameters in Al 7175 metal matrix composites using Taguchi method
	2020

[88]	A Critical Review on Advanced Reinforcements and Base Materials on Hybrid Metal Matrix Composites
	2020

[89]	Experimental investigation on surface roughness, tool wear and cutting force in turning of hybrid (Al7075+ SiC+ Gr) metal matrix composites
	2020

[90]	СТРУКТУРА И СВОЙСТВА АНТИФРИКЦИОННЫХ ПОКРЫТИЙ ИЗ СИЛУМИНА АК12, НАНЕСЕННЫХ НА СТАЛЬНУЮ ОСНОВУ ЦЕНТРОБЕЖНЫМ …
	2020

[91]	Pengaruh SiC dan Penambahan Fraksi Volume Mg Terhadap Karakteristik Komposit Al6061-SiC
	2020

[92]	Experimental Investigation of Mechanical and Wear Properties of AL7075/Al 2 O 3/MICA Hybrid Composite
	2020

[93]	New study on tribological performance of AA7075-TiB2 nanocomposites
	2020

[94]	Optimization of mechanical properties of aluminum metal matrix composite using silicon cambride
	2020

[95]	Hardness and wear behavior of al 6061/zrc composite processed by friction stir processing
	Tribology in Industry, 2020

[96]	Al-Mg Alloys Prepared by Mechanically Alloying Reinforced with Carbon Nanotubes and Their Corrosion Behavior in Bioethanol
	Int. J. Electrochem …, 2020

[97]	Experimental Analysis & Simulation of Tugsten Inert Gas (TIG) Welding on Aluminium Alloy AA6061
	2019

[98]	Исследование структуры и триботехнических свойств антифрикционных покрытий повышенной износостойкости, модифицированных карбидо …
	2019

[99]	ТЕХНОЛОГИЧЕСКИЕ ОСОБЕННОСТИ ПОЛУЧЕНИЯ БИМЕТАЛЛИЧЕСКИХ ВТУЛОК С АНТИФРИКЦИОННЫМ ПОКРЫТИЕМ ИЗ СПЛАВА АК12
	2019

[100]	Структура и триботехнические свойства бронзы БРОФ10-1, сформированные модифицированием сплава композиционным наполнителем, содержащим …
	2019

[101]	Parameter optimization and characterization of environmental friendly aluminium hybrid metal matrix composites
	2019

[102]	Synthesis, microstructure and properties of TiO2 reinforced AA7075 matrix composites via stir casting route
	2019

[103]	Compressive behavior of porous materials fabricated by laser melting deposition using AlSi12 powder and foaming agent
	2019

[104]	Alloys for aeronautic applications: state of the art and perspectives
	Metals, 2019

[105]	Tribology analysis of cobalt particulate filled Al 7075 alloy for gear materials: a comparative study
	Silicon, 2019

[106]	Corrosion behavior of A356/SiC alloy matrix composites in 3.5% NaCl solution
	Hinojosa, FR Gómez… - International Journal …, 2019

[107]	FORMABILITY CHARACTERISTICS OF Al-Cu-TiC COMPOSITE MATERIAL DURING COLD UPSETTING
	2019

[108]	Fabrication and Characterization of Hybrid Metal Matrix Composites
	2019

[109]	Studies on mild steel particulates reinforced Duralumin composite fabricated through Powder metallurgy route
	2019

[110]	A LITERATURE REVIEW ON ALUMINIUM-7075 METAL MATRIX COMPOSITES
	2019

[111]	Corrosion behaviour of novel molten salt processed aluminium nanocomposites under different treated conditions
	2019

[112]	NUMERICAL STUDY ON MHD MIXED CONVECTION SLIP EFFECTS NEAR A STAGNATION-POINT ON A LINEAR/NON-LINEARLYVERTICAL STRETCHING SHEET OF JEFFREY FLUID FLOW IN A POROUS MEDIUM WITH SUCTION OR INJECTION
	Global Journal of Engineering Science and Researches, 2019

[113]	Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced Al 7075 composites
	2019

[114]	Experimental Investigation of Wear and Hardness Properties of Reinforced Al-MMC's Without and with Heat Treatment Process
	2019

[115]	EXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF A DIESEL ENGINE WITH PISTON USING ALUMINIUM LM25 ALLOY …
	2019

[116]	Mechanical Strength and Corrosion Rate of Aluminium Composites (Al/SiO2): Nanoparticle Silica (NPS) as Reinforcement
	2019

[117]	A review on the production of metal matrix composites through stir casting–Furnace design, properties, challenges, and research opportunities
	2019

[118]	Development of High Performance (Mechanical and Wear Properties) of AA 6061-Hybrid Nano Composites Via Liquid Metallurgy Route
	2019

[119]	Effect of heat treatment on hardness, tensile strength and microstructure of hot and cold forged Al6061 metal matrix composites reinforced with silicon carbide particles
	2019

[120]	Investigation of mechanical properties of Al 6061/SiC composite prepared through stir casting technique
	2019

[121]	A Study of Macrostructure and Wear Behavior of AL7075-B4C MMC Using DoE Method
	2019

[122]	Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles
	Düzce üniversitesi Bilim ve Teknoloji Dergisi, 2019

[123]	Mechanical and tribological characterization of aluminum metal matrix composite reinforced with micro ceramic particles (TiB2/SiC)
	2019

[124]	Nanocomposites of Al5083/SiC; strength and wear behaviors
	2019

[125]	Effect of B4C and MOS2 reinforcement on micro structure and wear properties of aluminum hybrid composite for automotive applications
	2019

[126]	Assessment of mechanical and tribological characteristics of Silicon Nitride reinforced aluminum metal matrix composites
	2019

[127]	Effect of SiC Reinforced Particle Parameters in the Development of Aluminium Based Metal Matrix Composite
	EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 2019

[128]	Experimental Investigations on Wear Properties of Al-7075/ZrO2/Coal bottom ash Metal Matrix Composites
	The International journal of analytical and experimental modal analysis, 2019

[129]	Effects of Reinforcement on Tribological Behaviour of Aluminium Matrix Composites
	2019

[130]	An Investigation on Mechanical and Wear Characteristics of Al 6063/TiC Metal Matrix Composites Using RSM
	2019

[131]	EXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF A DIESEL ENGINE WITH PISTON USING ALUMINIUM LM25 ALLOY?REINFORCED WITH B4C AND GRAPHITE PARTICULATE
	International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)), 2019

[132]	Исследование теплофизических, механических и прочностных свойств композиционных материалов на основе углеродных наноструктур
	Thesis, 2019

[133]	Influence of nickel coating of Al2O3 (P) reinforced AA-7075 metal matrix composites on hardness, impact strength and tensile properties
	2019

[134]	PREPARATION OF AMCs BY STIR CASTING METHOD: A REVIEW
	2019

[135]	Experimental Investigation of Mechanical and Tribological Properties of Al 7075—MoS2/ZrO2/Ni Hybrid Composite
	Advances in Materials and Metallurgy, 2019

[136]	Production of aluminum alloy-based metal matrix composites using scrap aluminum alloy and waste materials: Influence on microstructure and mechanical properties
	2019

[137]	Dynamic analysis and optimization of SiC reinforced Al6082 and Al7075 MMCs
	2019

[138]	Mechanical Properties of AA 7075/Al2O3/SiC Nano-metal Matrix Composites by Stir-Casting Method
	Journal of The Institution of Engineers (India): Series D, 2019

[139]	Physical, Mechanical, and Tribological Properties of Al6061-B4C Composites
	2019

[140]	Influence of Titanium Diboride and Graphite Reinforcement on Al6061 Alloy
	2018

[141]	Mechanical and Tribological Properties of AA7075 Based MMC Processed through Ultrasound Assisted Casting Technique
	2018

[142]	Investigations on the Effect of Molybdenum (Mo) and Molybdenum Silicon Carbide (Mo-10% Sic) Composite Coatings on Mild Steel Substrate using HVOF Technique
	2018

[143]	Effect of SiC on Mechanical, Microstructure and Tribological properties of Aluminum MMC processed by Stir Casting
	2018

[144]	Mechanical and tribological behavior of SiC and fly ash reinforced Al 7075 composites compared to SAE 65 bronze
	2018

[145]	Surface quality and material removal rate in turning aluminium matrix composite–a grey relational approach
	2018

[146]	Investigation on mechanical properties of aluminium 7075-boron carbide-coconut shell fly ash reinforced hybrid metal matrix composites
	2018

[147]	Evaluation of Al7075 Reinforced with SiC for its Mechanical Properties & Surface Roughness by Drilling
	2018

[148]	Aluminium Composites Fabrication Technique and Effect of Improvement in Their Mechanical Properties–A Review
	2018

[149]	Investigation of mechanical, morphological studies and electrochemical micro holing process parameters on Al6061-SiC-Gr hybrid metal matrix composites
	International Journal of Heavy Vehicle Systems, 2018

[150]	Experimental Investigation of Mechanical and Tribological Properties Hybrid Composite of Al 7075—MoS2/ZrO2/Ni
	2018

[151]	STUDY ON MECHANICAL BEHAVIOR OF BORON CARBIDE AND RICE HUSK ASH BASED ALUMINIUM ALLOY 6061 HYBRID COMPOSITE
	International Journal of Technical Innovation in Modern Engineering & Science, 2018

[152]	Mechanical Properties of Al 6061/Al2O3 Nanocomposite by Stir Casting
	Engineering and Technology Journal, 2018

[153]	Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075–steel powder reinforced metal matrix …
	Materials Research Express, 2018

[154]	STUDIES ON MECHANICAL BEHAVIOUR OF ALUMINIUM BASED COMPOSITES
	2018

[155]	Role of Reinforcements on the Mechanical and Tribological Behavior of Aluminum Metal Matrix Composites–A Review
	Materials Today: Proceedings, 2018

[156]	Mechanical deformation behavior of aged Al-Cu alloys and innovative Al-Cu metal matrix composite fabricated using stir-casting technique
	Materials Today: Proceedings, 2018

[157]	Mechanical characterization of precipitation hardened Al7075-grey cast iron powder reinforced metal matrix composites
	International Conference on Research in Mechanical Engineering Sciences (RiMES 2017), 2018

[158]	Design and Evaluation of Al Hybrid Composite for Connecting Rod
	Advanced Manufacturing and Materials Science, 2018

[159]	Preparation and Study the Wear Behaviour of Aluminium Hybrid Composite
	Materials Today: Proceedings, 2018

[160]	Investigation of Hardness by Experimental and Simulation Studies on Al-12.5% Si Piston Alloys Reinforced by Cu Powder
	International Journal of Applied Engineering Research [IJAER], 2018

[161]	Study on Mechanical Behavior of Aluminum Alloy 6061 Based Composites a Review
	IOSR Journal of Mechanical and Civil Engineering, 2018

[162]	Mechanical Investigation of Aluminum Hybrid Composite Reinforced with CNT and Aluminum Oxide (Al2O3)
	Advanced Science, Engineering and Medicine, 2018

[163]	Experimental Investigations on Mechanical and Tribological Properties of Extruded Aluminium A356 - AL2O3 Stir Cast MMC
	Materials Today: Proceedings, 2018

[164]	Aluminium metal matrix composites: A retrospective investigation
	2018

[165]	Experimental Investigation of Friction and Wear Properties of a Clutch Facing Made of Al-7075 with Basalt Fiber Metal Matrix Composite
	Journal of Multiscale Modelling, 2018

[166]	An investigation on the tribological characteristics of Al 7075 based single and hybrid nanocomposites
	Materials Today: Proceedings, 2018

[167]	TRIBOLOGICAL BEHAVIOUR FOR STIR CAST Al5086/Gr/Al2O3 HYBRID MATRIX COMPOSITE
	2018

[168]	Artificial Neural Network Prediction On Wear Of Al6061 Alloy Metal Matrix Composites Reinforced With -Al2o3
	Materials Today: Proceedings, 2018

[169]	Effect of Ceramic and Metallic Reinforcement on Mechanical, Corrosion, and Tribological Behavior of Aluminum Composite by Adopting Design of Experiment Through Taguchi Technique
	2018

[170]	Fabrication of Al6061-Al2O3 composite through liquid metallurgy technique
	IOP Conference Series: Materials Science and Engineering, 2018

[171]	Manufacturing, characterization and applications of lightweight metallic foams for structural applications
	Materials Today: Proceedings, 2018

[172]	Amalgamation of aluminium-Mg2Si alloys in various weight percentage and study of their tensile and wear behaviours
	International Journal of Additive and Subtractive Materials Manufacturing, 2018

[173]	Effect of Tungsten Carbide Reinforcement on the Aluminum 6061 Alloy
	2018

[174]	Evaluation Microstructure and the Mechanical Properties of Composite Material for Al-Matrix Reinforced by Ceramic Materials (Sic And Al2O3)
	2018

[175]	Experimental studies of mechanical properties and tribological behaviour of aluminium composite reinforced with coconut shell ash particulates
	International Journal of Materials Engineering Innovation, 2018

[176]	Investigation of Reinforced Composite Aluminum Materials
	International Journal of Applied Physics and Mathematics, 2018

[177]	Influence of Solutionising and Aging Treatments on Mechanical Behavior of Stir-Cast Eutectoid Steel Powder Reinforced Al 7075 Metal Matrix Composites
	2018

[178]	Quality Enhancement of TIG Welded Al6061 SiCp Composites by Age Hardening Process
	2018

[179]	Experimental investigation on mechanical properties of aluminium based composites
	2018

[180]	SYNTHESIS OF AL5052-SIC-GRAPHITE METAL MATRIX COMPOSITE AND ASSESSMEMT OF ITS TRIBOLOGICAL PROPERTIES
	2018

[181]	Experimental Investigation and Analysis of Glass Fiber Epoxy Reinforced with Rubber and Wood Powder
	2018

[182]	Aluminum metal matrix composites a review of reinforcement; mechanical and tribological behavior.
	2018

[183]	Mechanical behavior of Al 7075 reinforced with AL2O3 And SiC Nano particles Fabricated by Stir Casting Method
	2018

[184]	Modeling of Wear Behavior of AA7068/TiC Metal Matrix Composites Using Fuzzy Logics and Response Surface Model
	2018

[185]	Utilization of Avocado Seeds as Bioplastic Films Filler Chitosan and Ethylene Glycol Plasticizer
	2018

[186]	MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE.
	2018

[187]	Mechanical characterization of deformed and heat treated copper-eutectoid steel powder reinforced composites
	2018

[188]	Aluminum metal matrix composites a review of reinforcement; mechanical and tribological behavior
	2018

[189]	Characterization And Tribological Behaviour Of Aluminium Metal Matrix Composite
	Journal of Engineering Research and Application, 2018

[190]	Effect of ceramic and metallic reinforcement on mechanical, corrosion, and tribological behavior of aluminum composite by adopting design of experiment through …
	2018

[191]	Manufacturing of aluminium composite materials: A review
	2018

[192]	A Study on the Al2O3 reinforced Al7075 Metal Matrix Composites Wear behavior using Artificial Neural Networks
	Materials Today: Proceedings, 2018

[193]	A Study on Mechanical Properties of Al-17Si Metal Matrix Composites
	IOP Conference Series: Materials Science and Engineering, 2018

[194]	Experimental Study of Hematite Reinforced Aluminum Metal Matrix Composites subjected to Equal Channel Angular Pressing
	Materials Today: Proceedings, 2018

[195]	Optimization of friction and wear behaviour of Al7075-Al2O3-B4C metal matrix composites using Taguchi method
	IOP Conference Series: Materials Science and Engineering, 2018

[196]	Effect of Processing Parameters on Metal Matrix Composites in Stir Casting Process Using Taguchi
	2018

[197]	Multi-Response Optimization of Al2024/red mud MMC using Hybrid Taguchi-GRA-Entropy Optimization Technique
	Materials Today: Proceedings, 2018

[198]	Aluminum metal matrix composites a review of reinforcement, mechanical and tribological behavior
	International Journal of Engineering & …, 2018

[199]	Controlling factors in aluminum matrix composites fabrication
	Anusandhan, 2018

[200]	THE EFFECT OF SILICON CARBIDE (SiC) ON PHYSICAL AND MECHANICAL PROPERTIES OF RECYCLED ALUMINIUM CHIP AA6061
	2018

[201]	2. Manufacturing of aluminium composite materials: A review
	2018

[202]	MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE
	2018

[203]	Comparative Analysis of an SI Engine Block Using Al Alloy and Metal Matrix Composite
	2018

[204]	Enhancement of tribological properties of Al 6060 by spray coated TiO2 nanoparticle
	Transactions of the Indian …, 2018

[205]	Investigation on properties of SiC reinforced Zn-Mg-Cu based Al metal matrix composites-a case study
	Materials Today …, 2018

[206]	Wear study of Al-SiC metal matrix composites processed through microwave energy
	AIP Conference …, 2018

[207]	TRIBOLOGICAL BEHAVIOUR OF ALUMINIUM BASED HYBRID METAL MATRIX COMPOSITES
	2018

[208]	Modeling of Wear Behavior of AA7068/TiC MMCs Using Fuzzy Logics and Response Surface Model
	Matrix, 2018

[209]	Fabrication and experimental analysis of aluminium composites and optimization of process parameters
	2017

[210]	Corrosion behavior of Al–Mg–Zn-Si alloy matrix composites reinforced with Y₂O₃ in 3.5% NaCl solution
	Int. J. Electrochem …, 2017

[211]	СТРУКТУРА И СВОЙСТВА СПЛАВА АК7, МОДИФИЦИРОВАННОГО КОМПОЗИЦИОННОЙ КАРБИДО-КОРУНДОВОЙ НАНОДОБАВКОЙ
	2017

[212]	Characterization and Mechanical Properties of Al2024/Sic Metal Matrix Composites
	International Journal of Research in Engineering and Science, 2017

[213]	Assessment of the density and mechanical properties of particulate periwinkle shell-aluminium 6063 metal matrix composite (PPS-ALMMC) produced by two …
	2017

[214]	Effect of lubrication on sliding wear of red mud particulate reinforced aluminium alloy 6061
	Tribology in …, 2017

[215]	Wear response of aluminium 6061 composite reinforced with red mud at elevated temperature
	Tribology in Industry, 2017

[216]	Investigation on Mechanical Properties and Analysis of Dry Sliding Wear Behavior of Al LM13/AlN Metal Matrix Composite Based on Taguchi's Technique
	Journal of Tribology, 2017

[217]	FINITE ELEMNT ANALYSIS OF TENSILE STRENGTH AND CHARACTERIZATION OF LM13 METAL MATRIX COMPOSITE
	2017

[218]	Mechanical and tribological behavior of the metal matrix composite AA6061/ZrO2/C
	Journal of Mechanical Science and Technology, 2017

[219]	Exploration of Mechanical behaviour and Wear Behaviour of Al 4 C 3 Reinforced Aluminium Metal Matrix Composites
	Materials Today: Proceedings, 2017

[220]	Wear Response of Aluminium 6061 Composite Reinforced with Red Mud at Elevated Temperature.
	Tribology in Industry, 2017

[221]	Review on Effect of Various Types of Reinforcement Particles on Mechanical Behavior of 6061 and 7075 Aluminium Alloy Matrix Composite
	2017

[222]	Microstructure analysis and mechanical behaviors of Al6063 reinforced with B4C and red soil metal matrix composite
	2017

[223]	Residual Stress Induced Mechanical Property Enhancement in Steel Encapsulated Light Metal Matrix Composites
	Materials Science and Engineering: A, 2017

[224]	Development and Comparative Studies of Aluminum-Based Carbon Nano Tube Metal Matrix Composites using Powder Metallurgy and Stir Casting Technology
	International Journal of Scientific & Engineering Research, 2017

[225]	Effect of sol–gel prepared nanoalumina reinforcement content on the corrosion resistances of Al 6061‐Al2O3 nanocomposite in 3.5% NaCl solution
	Materials and Corrosion, 2017

[226]	Study of Wear Characteristics of Hematite Reinforced Aluminum Metal Matrix Composites
	Materials Today: Proceedings, 2017

[227]	Assessment of some mechanical properties and microstructure of particulate periwinkle shell-aluminium 6063 metal matrix composite (PPS-ALMMC) produced by two …
	Nigerian Journal of Technology, 2017

[228]	An experimental investigation on mechanical behaviour of SiCp reinforced Al 6061 MMC using squeeze casting process
	2017

[229]	ВОЗДЕЙСТВИЕ СИНТЕЗИРУЕМОЙ НАНОКОМПОЗИЦИИ SiC-Al2O3 НА СТРУКТУРООБРАЗОВАНИЕ И ТРИБОТЕХНИЧЕСКИЕ СВОЙСТВА КОМПОЗИТА НА …
	2017

[230]	Effect of Lubrication on Sliding Wear of Red Mud Particulate Reinforced Aluminium Alloy 6061.
	Tribology in Industry, 2017

[231]	A Review on The Mechanical Properties of Aluminium Based Metal Matrix Composite via Powder Metallurgy
	2017

[232]	Multi-objective Optimization of Mechanical Properties of Aluminium 7075-Based Hybrid Metal Matrix Composite Using Genetic Algorithm
	Advances in 3D Printing & Additive Manufacturing Technologies, 2017

[233]	ASSESSMENT OF THE DENSITY AND MECHANICAL PROPERTIES OF PARTICULATE PERIWINKLE SHELL-ALUMINIUM 6063 METAL MATRIX COMPOSITE (PPS-ALMMC) PRODUCED BY TWO-STEP CASTING
	Acta Technica Corvininesis-Bulletin of Engineering, 2017

[234]	Effect of ZrO2 on microstructure and wear properties of Al2O3/Al-Si composites
	2017

[235]	Fabrication and characterization of the Al6063/5% ZrO2/5% Al2O3 composite
	IOP Conference Series: Materials Science and Engineering, 2017

[236]	A Study on Mechanical and Tribological Properties of Aluminium 7075 MMCs Reinforced with Nano Silicon Carbide (SiC), Tur Husk and E-Glass Fiber
	2017

[237]	Physical and mechanical behaviour of polysiloxane filled silica sheet
	2017

[238]	Fabrication of Aluminium based Metal Matrix Composite using Silicon Carbide Reinforcement and Evaluation of Mechanical Properties
	2017

[239]	Influence of Particle Additives on the Lubricated Tribology of Aluminium Metal Matrix Composite
	2017

[240]	Tribo-Evaluation of Some Candidate AMMC Discs Sliding Against Automobile Brake Pad
	2017

[241]	A study on mechanical and tribological properties of aluminium 7075 MMC's reinforced with nano silicon carbide (sic), tur husk and e-glass fiber
	2017

[242]	Wear analysis by Taguchi technique of Al6061 based hybrid composite reinforced with SiC and Al2O3
	2017

[243]	EFFECTS OF STIRRING TIME AND PARTICLES PREHEATING ON POROSITY, MECHANICAL PROPERTIES AND MICROSTRUCTURE OF PERIWINKLE …
	2017

[244]	Fabrication and Evaluation of Mechanical Properties of AL6061-4% B4C-4% CU Based Composite Experimentally
	2017

[245]	Fabrication and Testing of Aluminium 6061 Alloy & Silicon Carbide Metal Matrix Composites
	2017

[246]	Artificial Neural Networks for the Prediction of Wear Properties of Al6061-TiO2 Composites
	IOP Conference Series: Materials Science and Engineering, 2017

[247]	Experimental Study of EDM and Electromagnetic Field Assisted EDM for Ni Alloy: AComparative Study
	2017

[248]	Effect of Alloying Element on the Integrity and Functionality of Aluminium-Based Alloy
	Aluminium Alloys Recent Trends In Processing Characterization Mechanical Behavior And Applications, 2017

[249]	The Properties of an Aluminium Metal Matrix Composites: A Review
	International Journal of Advances in Scientific Research and Engineering (ijasre), 2017

[250]	Experimental and Statistical Study on Machinability of the Composite Materials with Metal Matrix Al/B4C/Graphite
	Metallurgical and Materials Transactions A, 2017

[251]	Investigation of Microstructural and Mechanical Properties of Al 5083-ZrSiO4-Gr Hybrid Composite
	International Journal of Nanoscience, 2017

[252]	Investigation on Tapping of Al6061-SiC Metal Matrix Composite with HSS Taps.
	Pertanika Journal of Science & Technology, 2017

[253]	EFFECT OF PARTICLES SIZE ON THE MECHANICAL PROPERTIES OF SiC-REINFORCED ALUMINIUM 8011 COMPOSITES
	2017

[254]	MECHANICAL AND TRIBOLOGICAL BEHAVIOR OF AL6061-GLASS PARTICULATE MMCs
	2017

[255]	Study of Corrosion Properties of SIC and E-GLASS reinforced al-3003 Hybrid MMC.
	2017

[256]	Study of Wear Properties of SiC Particulate And E-Glass Fiber Reinforced Al 3003 Hybrid Metal Matrix Composites
	2017

[257]	"Experimental Investigation of Mechanical properties of Bagasse Ash and SiC reinforced Al 7075 alloy matrix hybrid composites manufactured by stir casting method "
	2017

[258]	Comparative study on the mechanical and microstructural characterization of AA 7075 nano and hybrid nanocomposites produced by stir and squeeze castin
	journal of Advanced Research, 2017

[259]	A STUDY ON MECHANICAL AND TRIBOLOGICAL PROPERTIES OF ALUMINIUM 7075 MMCS REINFORCED WITH NANO SILICON CARBIDE (SIC), TUR HUSK …
	2017

[260]	Synthesis and Characterization of TiO2 Reinforced Al6061 Composites
	2017

[261]	ACTA TECHNICA CORVINIENSIS
	2017

[262]	ASSESSMENT OF THE DENSITY AND MECHANICAL PROPERTIES OF PARTICULATE PERIWINKLE SHELL-ALUMINIUM 6063 METAL MATRIX COMPOSITE (PPS …
	2017

[263]	ALUMINUM ALLOYS BY DFSP
	2017

[264]	Persuade of Reinforcement on the Mechanical Properties and Scrutiny of Process Parameters of the New Hybrid Al7075 Composite Dispersed with B4C and SIC …
	2016

[265]	Tribological properties of aluminium metal matrix composites-AA7075 reinforced with titanium carbide (TiC) particles
	2016

[266]	In-situ synthesis of aluminum-titanium diboride metal matrix hybrid nanocomposite
	ProQuest Dissertations Publishing, 2016

[267]	Investigation on the Hot Workability Characteristics and Deformation Mechanisms of Aluminium Alloy Nanocomposites
	2016

[268]	Influence of Reinforcements on Sliding Wear Behavior of Al6061/SiC-Frit Hybrid MMCs
	2016

[269]	Preparation of 7075Al-Al4C3 MMC's by Stir Casting and Evaluation of Mechanical and Wear Properties
	IOSR Journal of Mechanical and Civil Engineering, 2016

[270]	Influence of Artificial Aging on the Stir Cast Al6061-SiC Metal Matrix Composites under Different Aging Conditions
	2016

[271]	Studies on Adhesive Wear Characteristics of Heat Treated Aluminium LM25/AlB 2 Composites.
	Tribology in Industry, 2016

[272]	Al6061 Hybrid Metal Matrix Composite Reinforced with Alumina and Molybdenum Disulphide
	Advances in Materials Science and Engineering, 2016

[273]	Analysis of improvements in technologicalproperties of WC-Co tool materials fabricated by sparkplasmasintering
	Journal of Achievements in Materials and Manufacturing Engineering, 2016

[274]	Application of Grey-Taguchi Technique for Optimization of Process Parameters for Wear Behavior on AA7075-TiC Metal Matrix Composites
	2016

[275]	Optimisation of process parameters for minimum volumetric wear rate on AA7075-TiC metal matrix composite.
	2016

[276]	Effect of Equal Channel Angular Pressing on the Microstructure and Mechanical Properties of Al6061-SiCp Composites
	IOP Conference Series: Materials Science and Engineering, 2016

[277]	Evaluation of Intermetallic Reaction Layer Formation Within Steel Encapsulated Metal Matrix Composites
	TMS 2016 145th Annual Meeting & Exhibition, 2016

[278]	Effect of Carbon Fiber Rod Reinforcement on Slurry Erosive Behavior of Al6061 Composites
	Procedia Technology, 2016

[279]	Effect of Alumina on Green Properties of Al-Fe-Cr Powder Composites
	2016

[280]	Machining of Aluminum Hybrid Metal Matrix Composite by Wire Electrical Discharge Machine: A Review
	IUP Journal of Mechanical Engineering, 2016

[281]	Microstructural evolution in WC-Co cermet reinforced-A17075 metal matrix composites by stir casting
	IOP Conference Series: Materials Science and Engineering, 2016

[282]	The Dry-Sliding Wear Behavior of Aluminium Alloy/SiC Metal Matrix Composites
	International Journal of Advances in Scientific Research and Engineering, 2016

[283]	This copy is for personal use only-distribution prohibited.
	2016

[284]	Enhanced Mechanical Properties of Al-6061 Metal Matrix Composites Reinforced with α-Al2O3 Nanoceramics
	2016

[285]	Tribological properties of Aluminium Metal Matrix Composites (AA7075 Reinforced with Titanium Carbide (TiC) Particles)
	2016

[286]	Tensile And Hardness Behavior Of Aluminum 7075 And Zinc And Chromium Metal Matrix Composite By Stir-Casting Route
	2016

[287]	Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review
	Procedia Technology, 2016

[288]	Study of Wear Behavior and Mechanical Mixed Layer on Artificial Aged Al6061 Composite Reinforced with B4C Particles
	2016

[289]	Machinability Study on Drilling of Al7075/Al2O3P/GRP Hybrid Metal Matrix Composites
	2016

[290]	Analysis Of Mechanical Properties On Hybrid Metal Matrix Composite
	2016

[291]	Aluminium Oxide Particulate Reinforced Friction Stir Welded Joint of Aluminium Alloy 6061
	2016

[292]	TRIBOLOGICAL AND CORROSION BEHAVIOUR OF AL 6063/SIC METAL MATRIX COMPOSITES
	2016

[293]	Синтез комплексного нанонаполнителя SIC-AL2O3, получение армированного им композиционного материала на основе сплава АК12М2МгН
	2016

[294]	Establishing the Relationship Between Fatigue and Tensile Strength of Frictionally Joined Metal Matrix Nanocomposite Autogeneous Joints for Aerospace
	Transactions of the Indian Institute of Metals, 2016

[295]	Effect of carbonaceous reinforcements on the mechanical and tribological properties of friction stir processed Al6061 alloy
	Materials & Design, 2016

[296]	Study on Mechanical Properties and Microstructure of Aluminium Alloy 63401 Reinforced with Alumina Powder
	2016

[297]	INVESTIGATION ON MECHANICAL PROPERTIES OF AL 7075-AL2O3 METAL MATRIX COMPOSITE
	2016

[298]	DESIGN AND DEVELOPMENT OF A METAL MATRIX COMPOSITE FOR AERONAUTICAL APPLICATIONS-AN ASSESSMENT
	International Journal of Research in Mechanical, Mechatronics and Automobile Engineering, 2016

[299]	СИНТЕЗ КАРБИДО-КОРУНДОВОГО НАПОЛНИТЕЛЯ И ЕГО ВОЗДЕЙСТВИЕ НА СТРУКТУРУ И СВОЙСТВА ПОРШНЕВОГО СПЛАВА АК12М2МгН
	2016

[300]	Analysis on mechanical properties of zircon and Al2o3 of aluminium metal matrix composite
	Advances in Natural and Applied Sciences, 2016

[301]	Mechanical Behavior of Silicon Carbide Reinforced Friction Stir Welded Joint of Aluminium Alloy 6061
	2016

[302]	Investigation of Surface Roughness and Burr Height of Al/Al2O3/Gr Metal Matrix Composite for Various Drilling Parameters
	2016

[303]	Application of Taguchi Method to Study the Effects of Process Parameters on the Hardness of Composite Material Al 6063 and SiC
	2016

[304]	Influence of Extrusion Process on Mechanical and Tribological Properties of Aluminium A356-Al2O3 Stir Cast MMC
	2016

[305]	APPLICATIONS OF METAL MATRIX COMPOSITES- AN OVERALL ASSESSMENT
	International Journal of Research in Mechanical, Mechatronics and Automobile Engineering, 2016

[306]	Dry sliding wear behaviour of a novel 6351 Al-Al4SiC4 composite at high loads
	Canadian Metallurgical Quarterly, 2016

[307]	Studies on adhesive wear characteristics of heat treated aluminium LM25/AlB2 composites
	Tribology in Industry, 2016

[308]	Investigation of Mechanical Properties of Al356 Metal Matrix Composites
	Trends in Mechanical Engineering & Technology, 2016

[309]	Machining of Aluminum Hybrid Metal Matrix Composite by Wire Electrical Discharge Machine: A Review.
	2016

[310]	Tribological and corrosion behaviour of Al6063 metal matrix composites. t J. of Adv
	2016

[311]	Study of Wear Behavior and Mechanical Mixed Layer on Artificial Aged Al6061 Composite Reinforced with B
	2016

[312]	Experimental investigations on mechanical behavior of aluminium metal matrix composites
	2016

[313]	Developing Short Milled Carbon Fibre Modified Toughened Epoxy Matrix for Superior and Inexpensive infrastructural CFRP Laminates
	2016

[314]	CERCETĂRI PRIVIND CARACTERISTICILE TRIBOLOGICE ALE COMPOZITELOR Al-SiC-Grafit
	2015

[315]	Effect of hybrid reinforcement on mechanical behavior of Aluminium matrix composite
	Int J Eng Res Technol (IJERT), 2015

[316]	Wear behavior of aluminum alloy 6061-based composites reinforced with SiC, Al2O3, and red mud: a comparative study
	Jom, 2015

[317]	The effect of multidimensional curriculum on environmental knowledge, attitude and skill of preschoolers
	Gazi Univertesi Gazi Egitim Fakultesi Dergisi, 2015

[318]	Multi-response optimization of process parameters using Taguchi method and grey relational analysis during turning AA 7075/SiC composite in dry and spray cooling environments
	International Journal of Industrial Engineering Computations, 2015

[319]	Optimisation of Spindle Speed and Feed Rate for Drilling of Al-SiCp Metal Matrix Composites using ANOVA and Genetic Algorithm
	International Journal of Vehicle Structures & Systems, 2015

[320]	Review the Properties of Al7075 Matrix Composites
	Journal of Material Science and Mechanical Engineering, 2015

[321]	Enhancement of Hardness Related Properties of Grey Cast Iron Powder Reinforced AA7075 Metal Matrix Composites through T6 and T8 Heat Treatments
	2015

[322]	Evaluation of mechanical and thermal properties of silicon carbide and graphite reinforced hybrid metal matrix composite
	2015

[323]	Effect of Heat Treatment Variables on the Abrasive Wear Behaviour of Al-6061 Alloy and Al 6061-SiC P Composites Using Taguchi Technique
	American Journal of Materials Science, 2015

[324]	Optimization of FSW Process Parameters for AlSiC p PRMMC Using ANOVA
	Materials Today: Proceedings, 2015

[325]	Dry Sliding Wear Behavior of Al 2219/Al2O3-MoS2 Metal Matrix Hybrid Composites Produced by Stir Casting Route.
	International Journal of Engineering Research, 2015

[326]	Wear Behavior and Micro-structural Study of Al/Al 2 O 3 Nano-composites Before and After Heat Treatment
	Materials Today: Proceedings, 2015

[327]	Physico-Chemical Characterization of Novel Epoxy Matrix System Reinforced with Recycled Short Milled Carbon Fibre
	Journal of Minerals and Materials Characterization and Engineering, 2015

[328]	Tribological behavior of heat treated Al 7075 aluminium metal matrix composites
	Indian Journal of Engineering & Materials Sciences, 2015

[329]	Synthesis of new aluminum nano hybrid composite liner for energy saving in diesel engines
	Energy Conversion and Management, 2015

[330]	Developing and analyzing the Mechanical Properties of industrial Aluminum-Bronze AB-1-RHA metal matrix composite
	2015

[331]	Evaluation of Mechanical Properties of Aluminium Alloy 7075 Reinforced with SiC and Al2O3 Hybrid Metal Matrix Composites
	Applied Mechanics and Materials, 2015

[332]	Study of Mechanical Behaviour of Aluminium Matrix Composite by Analytical and Experimental Approach
	2015

[333]	Mechanical Properties of Aluminum 6063 Alloy based Graphite Particles Reinforced Metal Matrix Composite
	2015

[334]	OPTIMIZATION TECHNIQUE TO STUDY DRY SLIDING WEAR BEHAVIOR OF ALUMINIUM ALLOY 2218 BASED SELF LUBRICATING COMPOSITE MATERIALS
	International Journal of Advance Research and Innovative Ideas in Education, 2015

[335]	Mechanical Properties of Steel Encapsulated Metal Matrix Composites
	Advanced Composites for Aerospace, Marine, and Land Applications II, 2015

[336]	Effect of heat treatment variables on the abrasive wear behaviour of Al-6061 Alloy and Al 6061-SiCP composites using Taguchi Technique
	2015

[337]	Studies On Mechanical And Tribological Properties Of Aluminum Based Metal Matrix Composites–A Review
	2015

[338]	Study on mechanical properties of Al 7075 based metal matrix composites
	2015

[339]	Mechanical And Tribological Characterization Of Particulate Filled Al7075 Alloy Hybrid Composites For Piston Ring Material...
	2015

[340]	Analysis on Mechanical Behaviour of AA 1050/SiC and AA 1050/Al2O3 Composites
	2015

[341]	Experimental Investigation on Parametrical Changes and Texture Analysis on Al6063/Al2o3 Metal Matrix Composite by Wire-Cut Electric Discharge Machining …
	2015

[342]	Effect of silicon carbide percentage on fracture toughness of aluminum silicon carbide metal matrix composites
	2014

[343]	Review on effect of hybrid reinforcement on mechanical behavior of aluminium matrix composite
	2014

[344]	EXPERIMENTAL ANALYSIS OF THERMOPHYSICAL AND MECHANICAL CHARACTERISTICS OF AlSiCp METAL MATRIX COMPOSITE
	2014

[345]	ASSESSMENT OF HARDNESS AND TENSILE PROPERTIES OF STIR-CAST ALUMINIUM MATRIX REINFORCED WITH TETRACARPIDIUM CONOPHORUM KERNEL
	International Journal of Engineering, 2014

[346]	Alumina particle reinforced TiO2 composite films grown by direct liquid injection MOCVD
	Vacuum, 2014

[347]	Exploration of mechanical behavior of Al2O3 reinforced aluminium metal matrix composites
	2014

[348]	Tensile and dry sliding wear behavior of Al7075-Al2O3 glass composites
	IOSRD International Journal of Engineering, 2014

[349]	Characterization of Al-Fe-Cr-Al2O3 composites with varying weight percentage of alumina fabricated through mechanical alloying
	International Journal of Applied Science and Engineering Research, 2014

[350]	Effect of Machining Parameters on the Surface Roughness while Turning Particulate Composites
	Procedia Engineering, 2014

[351]	Investigations on the electric discharge machining of aluminium metal matrix composites MMCS and Aluminium Metal Matrix Nano Composites Mmncs
	2014

[352]	Dry Sliding Wear and Friction of Aluminium Alloy Silicon Carbide Particulates Reinforced Composites
	International Journal of Vehicle Structures & Systems, 2014

[353]	CORROSION BEHAVIOUR OF COLD DEFORMED AND SOLUTION HEAT-TREATED ALUMINA REINFORCED ALUMINIUM MATRIX COMPOSITES IN 0.3 MH₂ SO₄ SOLUTION
	Acta Technica Corviniensis-Bulletin of Engineering, 2014

[354]	Preparation and Mechanical Characterization of Stir Cast Hybrid Al7075-Al2O3-B4C Metal Matrix Composites
	Applied Mechanics & Materials, 2014

[355]	Studies on mechanical and tribological behaviour of particulate Aluminium metal matrix composites
	2014

[356]	Effects of Reinforced Particulates on Properties of Aluminium Metal Matrix Composite
	AISECT University Journal, 2014

[357]	Preparation, Characterization and Machinability of Al7075-Al₂O₃ Matrix Composite Using Multi Layer Coated Carbide Insert
	Procedia Materials Science, 2014

[358]	High-precision machining of aspheric mirror surfaces for the space cryogenic infrared telescope
	Proceedings of the International Conference of Manufacturing Technology Engineers (ICMTE), 2014

[359]	Fabrication, Surface Morphology and Corrosion Investigation of Al 7075-Al₂O₃ Matrix Composite in Sea Water and Industrial Environment
	Procedia Engineering, 2014

[360]	A study on ultra-precision machining technique for Al6061-T6 to fabricate space infrared optics
	SPIE Astronomical Telescopes+ Instrumentation, 2014

[361]	Machining Behavior of Al6061-Fly Ash Composites
	Procedia Materials Science, 2014

[362]	Fabrication and heat treatment of ceramic-reinforced aluminium matrix composites-a review
	International Journal of Mechanical and Materials Engineering, 2014

[363]	Mechanical and Microstructure Characterization of A356 (Al/SiC) MMC
	Advanced Materials Research, 2014

[364]	EFFECT OF SILICON CARBIDE PERCENTAGE ON FRACTURE TOUGHNESS OF ALUMINIUM SILIOCN CARBIDE METAL MATRIX COMPOSITES
	2014

[365]	Experimental Investigation of Al6061/Al₂O₃ Composite and Analysis of its Mechanical Properties on Onshore Wind Tower using Hybrid Technique for Indian Condition
	Procedia Materials Science, 2014

[366]	DEFORMED AND SOLUTION HEAT-TREATED ALUMINA REINFORCED ALUMINIUM MATRIX COMPOSITES IN 0.3 MH2so4 SOLUTION
	2014

[367]	STUDY OF WEAR BEHAVIOUR OF Al/(Al2O3P and SiCP) HYBRID METAL MATRIX COMPOSITES
	Malaysian Journal of Science, 2014

[368]	Taguchi Grey Relational Analysis of Dry Sliding Wear Behaviour of Annealed AA7075-TiC Metal Matrix Composites
	Applied Mechanics …, 2014

[369]	Review on Effect of Hybrid Reinforcement on Mechanical Behavior of Aluminium Matrix Composite.
	2014

[370]	CORROSION BEHAVIOUR OF COLD DEFORMED AND SOLUTION HEAT-TREATED ALUMINA REINFORCED ALUMINIUM MATRIX COMPOSITES IN 0.3 MH …
	2014

[371]	Development of a Novel Cast 6351 Al-Al 4 SiC 4 In Situ Composite
	2013

[372]	PENGARUH TEMPERATUR HOT-PRESS TERHADAP KARAKTERISTIK KOMPOSIT AC8A/SICP
	2013

[373]	MECHANICAL BEHAVIOUR OF ALUMINA REINFORCED AA 6063 METAL MATRIX COMPOSITES DEVELOPED BY TWO STEP–STIR CASTING PROCESS
	Acta Technica Corvininesis-Bulletin of Engineering, 2013

[374]	Optimization of Process Parameters of CNC Milling for Aluminium Metal Matrix Composite
	2013

[375]	Review on Effect of Silicon Carbide (SiC) on Stir Cast Aluminium Metal Matrix Composites
	International Journal of Current Engineering and Technology, 2013

[376]	MECHANICAL BEHAVIOUR OF ALUMINIUM 6061 ALLOY REINFORCED WITH Al2O3 & GRAPHITE PARTICULATE HYBRID METAL MATRIX COMPOSITES
	International Journal of Research in Engineering & Technology, 2013

[377]	Production of Aluminium AC8H/Al2O3p Coated Metal Matrix Composites by Stir Casting Route
	KMUTNB: International Journal of Applied Science and Technology, 2013

[378]	Effect of Machining Parameters on MRR and Surface Roughness in Machining of ZA43/SiCp Composite by WEDM
	International Journal of Applied Science and Engineering, 2013

[379]	Microstructural characterisation of novel 6351 Al-Al4SiC4 in-situ composite
	Materials Science and Technology, 2013

[380]	Development of a Novel Cast 6351 Al-Al4SiC4 In Situ Composite
	Journal of materials engineering and performance, 2013

[381]	Development of a novel 6351 Al–(Al₄ SiC₄+ SiC) hybrid composite with enhanced mechanical properties
	Materials Science and Engineering: A, 2013

[382]	Individual and Combined Effect of Reinforcements on Stir Cast Aluminium Metal Matrix Composites-A Review
	International Journal of Current Engineering and Technology, 2013

[383]	EFFECT ON PROPERTIES OF ALUMINUM BY ADDING ALUMINA SLAG AS A STRENGTHENER
	2013

[384]	Production and Tribological Characterization of Stir-Cast Hybrid Composite Aluminium 6061 Reinforced with Sic and Ti Particulates
	International Journal of Innovative Research and Development, 2013

[385]	Tribological behaviour of AA 5083/Micron and Nano SiC composites fabricated by ultrasonic assisted stir casting process
	International Journal of Scientific and Research Publications, 2013

[386]	Preparation and Property Evaluation of Aluminium alloy (6061) Reinforced with Bottom Ash Particulate composite (ALBAP Composite)
	International Journal of Science Research, 2013

[387]	Influence of B 4 C on the tribological and mechanical properties of Al 7075–B 4 C composites
	Composites Part B: Engineering, 2013

[388]	Mechanical Behaviour of Cold Deformed and Solution Heat-treated Alumina Reinforced AA 6063 Metal Matrix Composites
	The West Indian Journal of Engineering, 2013

[389]	AN APPROACH FOR IMPROVING WEAR RATE OF ALUMINUM BASED METAL USING RED MUD, SIC AND Al
	International Journal of Mechanical Engineering and Robotics Research, 2013

[390]	Effect of reinforcement percentage on wear behavior of SiCp reinforced ZA43 alloy metal matrix composites
	Science and Engineering of Composite Materials, 2013

[391]	Fabrication and characterization of SiC, Al2O3 and B4C reinforced Al-Zn-Mg-Cu alloy (AA 7075) metal matrix composites: a study
	Advanced Materials Research, 2013

[392]	A review on the state of art of wear characteristics of aluminium alloy metal matrix composites
	Journal of the Balkan Tribological Association, 2013

[393]	Investigation of tribological behavior and its relation with processing and microstructures of Al 6061 metal matrix composites
	International Journal of Research in Engineering & Technology (IJRET), 2013

[394]	Design, Fabrication and Analysis of Torque Transducer
	2013

[395]	Effect of process parameters on corrosion rate of friction stir welded aluminium SiC–Gr hybrid composites
	Corrosion Engineering, Science and Technology, 2013

[396]	Effect of Al2O3 Particles on Mechanical and Wear Properties of 6061al Alloy Metal Matrix Composites
	Journal of Material Sciences & Engineering, 2013

[397]	Mechanical behaviour of alumina reinforced AA 6063 metal matrix composites developed by two step-stir casting process
	Acta Technica Corviniensis-bulletin of engineering, 2013

[398]	Investigations for Machining of AL/SiC MMC with various percentages of SiC Reinforcements During EDM
	International Journal of Engineering Research & Technology, 2013

[399]	Mechanical and microstructural characterization of AA6061 reinforced with SiC particles
	2012

[400]	Production and age-hardening behavior of borax premixed SiC reinforced Al-Mg-Si alloy composites developed by double stir-casting technique
	2012

[401]	Evaluation Of Mechanical And Tribological Properties Of Aluminium Based Hybrid Metal Matrix Composites
	2012

[402]	Studying the dry sliding wear behavior of Al-4% Cu/SiC metal matrix composite with heat treatment
	Tikrit Journal of Pure Science, 2012

[403]	PROCESSING, CHARACTERIZATION AND EROSION WEAR RESPONSE OF PARTICULATE FILLED ZA-27 METAL MATRIX COMPOSITES
	Thesis (MTech by Research), 2012

[404]	Processing Parameters Effect on Friction Stir Welded Aluminum Matrix Composites Wear Behavior
	2012

[405]	PREPARATION AND EVALUATION OF MECHANICAL AND WEAR PROPERTIES OF Al6061 REINFORCED WITH GRAPHITE AND SiC PARTICULATE METAL MATRIX COMPOSITES
	International Journal of Mechanical Engineering and Robotics Research, 2012

[406]	Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063)–silicon carbide particulate composites
	Scientia Iranica, 2012

[407]	An Overview On Development Of Aluminium Metal Matrix Composites With Hybrid Reinforcement
	IJSR, India online ISSN, 2012

[408]	Effect of particle size on mechanical properties and tribological behaviour of aluminium/fly ash composites
	Science and Engineering of Composite Materials, 2012

[409]	Analysis of Parameters Influencing Wear and Frictional Behavior of Aluminum–Fly Ash Composites
	Tribology Transactions, 2012

[410]	Effect of processing parameters on friction stir welded Aluminum matrix composites wear behavior
	Materials and Manufacturing Processes, 2012

[411]	Mechanical behaviour of aluminium based metal matrix composites reinforced with aluminium oxide
	2012

[412]	An Experimental investigation of Mechanical behavior of Aluminum by adding SiC and Alumina
	International Journal on Emerging Technologies, 2012

[413]	Studies on properties of as-cast Al6061-WC-Gr hybrid MMCs
	Journal of Composite Materials, 2012

[414]	FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites
	Journal of Minerals and Materials Characterization and Engineering, 2012

[415]	Mechanical behaviour of aluminium based metal matrix composites reinforced with SIC and Alumina
	2011

[416]	Corrosion behavior of alumina reinforced aluminium (6063) metal matrix composites
	Journal of Minerals and Materials Characterization and Engineering, 2011

[417]	TEM INVESTIGATION OF MATRIX-SAFFIL? FIBER INTERFACES IN ALUMINIUM ALLOYS BASED COMPOSITES
	Acta Metallurgica Slovaca, 2011

[418]	Synthesis and Property Evaluation of Al7075-Al2O3 Composites
	Biometrics and Bioinformatics, 2011

[419]	Microstructure and tensile properties of composites with high strength aluminium alloys matrix reinforced with Saffil™ fibers
	Kompozyty, 2011

[420]	The Effect of (á-Al2O3) Volume Fraction on The Mechanical Properties of (Al-Alumina) Metal Matrix Composite
	Engineering and Technology Journal, 2011

[421]	Microstructure and tensile properties of composities with high strength aluminium alloys matrix reinforced with Saffil™ fibers
	2011

[422]	WEAR BEHAVIOUR OF ALUMINIUM BASED METAL MATRIX COMPOSITES REINFORCED WITH RED MUD, SiC
	2011

[423]	Mechanical and tribological properties of As-cast Al6061-Tungsten carbide metal matrix composites
	Material Science Research India, 2010

[424]	Compacting Characteristics of Aluminum-10 wt% Fly Ash-Lead Metal Matrix Composites
	International Journal of Materials Science, 2010

[425]	Effects of Al-SiC Composite Tool Fabricated through Stir Casting Method on Process Parameters of EDM


[426]	ALUMINIUM OXIDE (Al2O3)-FEW LAYER GRAPHENE (FLG) REINFORCED ALUMINIUM HYBRID COMPOSITES


[427]	Enhancement of Tribological Properties of Al 6060 by Spray Coated TiO Nanoparticle
	M Sam, BA Guhan

[428]	Investigation of Mechanical Properties of Aluminium356 reinforced with Nano Alumina and Studying the effect of addition of MoS2 on Aluminum …


[429]	INFLUENCE OF THE STRUCTURE OF MINERAL-CERAMIC ABRASIVE MATERIAL ON THE OPERATIONAL PARAMETERS AND MORPHOLOGY OF THE …

[1]	A novel technique for surface modification of aluminium alloy using GTAW Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023 DOI:10.1007/s40430-022-04000-0

[2]	Reinforcement of micro and nano material with aluminum alloy (Al7075) metal matrix composite: a review Journal of Physics: Conference Series, 2023 DOI:10.1088/1742-6596/2484/1/012023

[3]	Influence of Metallic Particles on Properties of Aluminium Composites through Taguchi Technique Advances in Materials Science and Engineering, 2023 DOI:10.1155/2023/9637728

[4]	Processing of powder metallurgy metal matrix composite and performance analysis during machining 5TH INTERNATIONAL CONFERENCE ON INNOVATIVE DESIGN, ANALYSIS & DEVELOPMENT PRACTICES IN AEROSPACE & AUTOMOTIVE ENGINEERING: I-DAD’22, 2023 DOI:10.1063/5.0139439

[5]	Study of tribological and mechanical properties of composite reinforced with tungsten carbide 4TH INTERNATIONAL SCIENTIFIC CONFERENCE OF ENGINEERING SCIENCES AND ADVANCES TECHNOLOGIES, 2023 DOI:10.1063/5.0121012

[6]	Synthesis of Al-B4C Functionally Graded Materials by Sound-Wave-Assisted Vibrational Casting Methodology Journal of Materials Engineering and Performance, 2023 DOI:10.1007/s11665-022-07640-4

[7]	Studies and scientific research analysis of aluminium (Al7075) metal matrix composite surface morphology Materials Today: Proceedings, 2023 DOI:10.1016/j.matpr.2023.09.032

[8]	Moisture effects on vibration response of SMA particulate epoxy composite Australian Journal of Mechanical Engineering, 2023 DOI:10.1080/14484846.2022.2047471

[9]	Influence of particulates on microstructure, Mechanical and Fractured behaviour on Al-7075 alloy composite by FEA Australian Journal of Mechanical Engineering, 2023 DOI:10.1080/14484846.2023.2276987

[10]	Contemporary progress on mechanical and wear of aluminium alloys stir casting composites: A review CONTEMPORARY INNOVATIONS IN ENGINEERING AND MANAGEMENT, 2023 DOI:10.1063/5.0158523

[11]	A Systematic Review on the Mechanical, Tribological, and Corrosion Properties of Al 7075 Metal Matrix Composites Fabricated through Stir Casting Process Advances in Materials Science and Engineering, 2023 DOI:10.1155/2023/5442809

[12]	Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites Materials Testing, 2022 DOI:10.1515/mt-2021-2060

[13]	Effect of reinforcement and fabrication of Al6061 nanosilica composite prepared using single- and two-step methods Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2020.1815139

[14]	An overview on the synthesis of aluminium matrix composites using stir casting technique Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2021.09.509

[15]	Calculation of the Grinding Performance of Diamond-Bearing Ceramic Tools Key Engineering Materials, 2022 DOI:10.4028/p-oqzqxx

[16]	Moisture effects on vibration response of SMA particulate epoxy composite Australian Journal of Mechanical Engineering, 2022 DOI:10.1080/14484846.2022.2047471

[17]	Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites Materials Testing, 2022 DOI:10.1515/mt-2021-2060

[18]	Microstructure and mechanical properties of A356/Al2O3/MoS2 hybrid nanocomposites Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2021.09.472

[19]	Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites Silicon, 2022 DOI:10.1007/s12633-022-01908-z

[20]	TIG welding parameters optimization of Al–Si–Mg ternary alloy–SiC powder reinforced composites using Taguchi and RSM techniques Cogent Engineering, 2022 DOI:10.1080/23311916.2022.2083473

[21]	Fabrication and Characterization of Aluminum (Al-6061) Matrix Composite Reinforced with Waste Glass for Engineering Applications Journal of Nanomaterials, 2022 DOI:10.1155/2022/8409750

[22]	Production of AA1050/silica fume composite by bobbin tool-friction stir processing: Microstructure, composition and mechanical properties CIRP Journal of Manufacturing Science and Technology, 2022 DOI:10.1016/j.cirpj.2022.07.002

[23]	Non-destructive evaluation from deformed aluminum alloy 6063 and silicon carbides black and green reinforced aluminium alloy based composites Materials Express, 2022 DOI:10.1166/mex.2022.2166

[24]	An overview on the synthesis of aluminium matrix composites using stir casting technique Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2021.09.509

[25]	Impact of Silicon Carbide Particles Weight Percentage on the Microstructure, Mechanical Behaviour, and Fractography of Al2014 Alloy Composites Advances in Materials Science and Engineering, 2022 DOI:10.1155/2022/2839150

[26]	Investigation on Tribological Characteristics of Al 7075 MMNC: Behavior of Micro- and Nano-Sized Composites Proceedings of Engineering and Technology Innovation, 2022 DOI:10.46604/peti.2022.8943

[27]	Investigation on wear characteristics of Al 2219/Si3N4/Coal bottom ash MMC Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.04.325

[28]	Effect of weight of reinforcement and coating thickness on the hardness of stir cast AL7075-nickel coated duralumin powder mmc Journal of Applied Engineering Science, 2022 DOI:10.5937/jaes0-34780

[29]	Effect of reinforcement and fabrication of Al6061 nanosilica composite prepared using single- and two-step methods Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2020.1815139

[30]	Synthesis of Al-B4C Functionally Graded Materials by Sound-Wave-Assisted Vibrational Casting Methodology Journal of Materials Engineering and Performance, 2022 DOI:10.1007/s11665-022-07640-4

[31]	Physical, mechanical, and fracture studies of Al6061-B4C MMCs THE 8TH ANNUAL INTERNATIONAL SEMINAR ON TRENDS IN SCIENCE AND SCIENCE EDUCATION (AISTSSE) 2021, 2022 DOI:10.1063/5.0109267

[32]	Preparation and Evaluation of Hardness and Wear Properties of WC-Co Particulates Reinforced 7075Al Composites Journal of Mines, Metals and Fuels, 2022 DOI:10.18311/jmmf/2022/32038

[33]	Investigation on wear characteristics of Al 2219/Si3N4/Coal bottom ash MMC Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.04.325

[34]	Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites Silicon, 2022 DOI:10.1007/s12633-022-01908-z

[35]	Proceedings of the 7th International Conference on Industrial Engineering (ICIE 2021) Lecture Notes in Mechanical Engineering, 2022 DOI:10.1007/978-3-030-85233-7_96

[36]	Effect of Pin Geometry and Orientation on Friction and Wear Behavior of Nickel-Coated EN8 Steel Pin and Al6061 Alloy Disc Pair Advances in Materials Science and Engineering, 2022 DOI:10.1155/2022/3274672

[37]	AN ANALYSIS OF IN-SITU SYNTHESIZED AL 6061 ALLOY METAL MATRIX COMPOSITES: REVIEW European Journal of Materials Science and Engineering, 2021 DOI:10.36868/ejmse.2021.06.04.220

[38]	Effect of SiC particle size and weight % on mechanical properties of AA7075 SiC composite Advanced Composites and Hybrid Materials, 2021 DOI:10.1007/s42114-020-00175-z

[39]	Mechanical characterization of Al6061 reinforced with aloe vera powder and SiC Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.11.328

[40]	Micro-structural and mechanical characterization of AA2014/TiB2/Al2O3 hybrid composites RECENT TRENDS IN MANUFACTURING TECHNOLOGIES, MATERIALS PROCESSING, AND TESTING, 2021 DOI:10.1063/5.0068176

[41]	Physical and tribological properties of Al6061-B4C MMCs PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE OF GREEN CIVIL AND ENVIRONMENTAL ENGINEERING (GCEE 2021), 2021 DOI:10.1063/5.0072657

[42]	Encyclopedia of Materials: Composites 2021 DOI:10.1016/B978-0-12-819724-0.00110-5

[43]	Mechanical, tribological and microstructural characterization of stir cast Al-6061 metal/matrix composites—a comprehensive review Sādhanā, 2021 DOI:10.1007/s12046-021-01567-7

[44]	Synthesis and Mechanical Behavior of Ball-Milled Agro-Waste RHA and Eggshell Reinforced Composite Material Materials Performance and Characterization, 2021 DOI:10.1520/MPC20190247

[45]	Experimental analysis of Al-AlN-B4C hybrid composite material for automobile disk brake Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2021.01.954

[46]	Effect Multiple Addition (TiO₂ and Fly Ash) on Wear Behavior and Hardness of 2024 Al Alloy Materials Science Forum, 2021 DOI:10.4028/www.scientific.net/MSF.1039.201

[47]	Mechanical, tribological and microstructural characterization of stir cast Al-6061 metal/matrix composites—a comprehensive review Sādhanā, 2021 DOI:10.1007/s12046-021-01567-7

[48]	Influence of Heat Treatment on Mechanical Characteristics of Al7075/Al2O3/TiC Hybrid Metal Matrix Composite IOP Conference Series: Materials Science and Engineering, 2021 DOI:10.1088/1757-899X/1112/1/012015

[49]	A comprehensive review of aluminium matrix composite reinforcement and fabrication methodologies Functional Composites and Structures, 2021 DOI:10.1088/2631-6331/abddc8

[50]	Synthesis and Mechanical Behavior of Ball-Milled Agro-Waste RHA and Eggshell Reinforced Composite Material Materials Performance and Characterization, 2021 DOI:10.1520/MPC20190247

[51]	Electro-discharge machining of metal matrix composites - a review Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.04.274

[52]	Manufacturing techniques for metal matrix composites (MMC): an overview Advances in Materials and Processing Technologies, 2020 DOI:10.1080/2374068X.2020.1729603

[53]	Appraisal of tribological properties of A356 with 20% SiC composites under dry sliding condition Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020 DOI:10.1007/s40430-020-2231-8

[54]	Experimental Investigation of Mechanical Properties of Ceramic Reinforced Al-7075 Metal Matrix Hybrid Composites Materials Science Forum, 2020 DOI:10.4028/www.scientific.net/MSF.979.34

[55]	Influence of Milling Parameters on Surface Roughness of Al–SiC–B4C Composites Transactions of the Indian Institute of Metals, 2020 DOI:10.1007/s12666-020-01960-6

[56]	Comparison of mechanical properties of Al6063 alloy with ceramic particles Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.03.442

[57]	Tribological characteristics of TiO2 particles reinforced aluminum nanocomposites produced via liquid metallurgy techniques with ultrasonic vibrator PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 2020 DOI:10.1063/5.0024981

[58]	Coated and uncoated reinforcements metal matrix composites characteristics and applications – A critical review Cogent Engineering, 2020 DOI:10.1080/23311916.2020.1856758

[59]	Dry sliding wear behaviour of Al6061–5%SiC—TiB2 hybrid metal matrix composites synthesized by stir casting process Materials Research Express, 2020 DOI:10.1088/2053-1591/abd19b

[60]	Physical, Mechanical, and Tribological Properties of Al6061-B4C Composites Journal of Testing and Evaluation, 2019 DOI:10.1520/JTE20180138

[61]	Compressive behavior of porous materials fabricated by laser melting deposition using AlSi12 powder and foaming agent Materials Research Express, 2019 DOI:10.1088/2053-1591/aafc5a

[62]	FABRICATION AND CHARACTERIZATION OF HYBRID METAL MATRIX COMPOSITES i-manager's Journal on Mechanical Engineering, 2019 DOI:10.26634/jme.9.2.15164

[63]	Effect of Al2O3 reinforcement and precipitates on corrosion behaviour of 2618 and 6061 aluminium MMCs Corrosion Engineering, Science and Technology, 2019 DOI:10.1080/1478422X.2019.1645802

[64]	Investigations on tribological behaviour of AA7075-TiO2 composites under dry sliding conditions Industrial Lubrication and Tribology, 2019 DOI:10.1108/ILT-01-2019-0003

[65]	Nanocomposites of Al5083/SiC; strength and wear behaviors Materials Research Express, 2019 DOI:10.1088/2053-1591/ab3b91

[66]	Effect of heat treatment on hardness, tensile strength and microstructure of hot and cold forged Al6061 metal matrix composites reinforced with silicon carbide particles Materials Research Express, 2019 DOI:10.1088/2053-1591/ab4297

[67]	Corrosion behaviour of novel molten salt processed aluminium nanocomposites under different treated conditions Materials Research Express, 2019 DOI:10.1088/2053-1591/ab51c0

[68]	Influence of nickel coating of Al2O3(P) reinforced AA-7075 metal matrix composites on hardness, impact strength and tensile properties Materials Research Express, 2019 DOI:10.1088/2053-1591/ab5594

[69]	Parameter optimization and characterization of environmental friendly aluminium hybrid metal matrix composites Materials Research Express, 2019 DOI:10.1088/2053-1591/ab4fb4

[70]	Tribological Behavior of AA7050-ZrSiO4 Composites Synthesized by Stir Casting Technique Mechanics and Mechanical Engineering, 2019 DOI:10.2478/mme-2019-0026

[71]	Physical, Mechanical, and Tribological Properties of Al6061-B4C Composites Journal of Testing and Evaluation, 2019 DOI:10.1520/JTE20180138

[72]	Corrosion Behavior of A356/SiC Alloy Matrix Composites in 3.5% NaCl Solution International Journal of Electrochemical Science, 2019 DOI:10.20964/2019.08.33

[73]	Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B 4 C and Al6061-SiC Composites Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.11.023

[74]	Effect of Ceramic and Metallic Reinforcement on Mechanical, Corrosion, and Tribological Behavior of Aluminum Composite by Adopting Design of Experiment Through Taguchi Technique Journal of Tribology, 2018 DOI:10.1115/1.4039527

[75]	COMPARATIVE ANALYSIS OF AN SI ENGINE BLOCK USING Al ALLOY AND METAL MATRIX COMPOSITE i-manager's Journal on Mechanical Engineering, 2018 DOI:10.26634/jme.8.4.14296

[76]	Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075–steel powder reinforced metal matrix composites Materials Research Express, 2018 DOI:10.1088/2053-1591/aae3ae

[77]	Manufacturing, characterization and applications of lightweight metallic foams for structural applications: Review Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.06.414

[78]	Role of Reinforcements on the Mechanical and Tribological Behavior of Aluminum Metal Matrix Composites – A Review Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.06.371

[79]	Mechanical characterization of precipitation hardened Al7075-grey cast iron powder reinforced metal matrix composites MATEC Web of Conferences, 2018 DOI:10.1051/matecconf/201714402007

[80]	Mechanical characterization of precipitation hardened Al7075-grey cast iron powder reinforced metal matrix composites MATEC Web of Conferences, 2018 DOI:10.1051/matecconf/201814402007

[81]	Experimental Investigations on Mechanical and Tribological Properties of Extruded Aluminium A356 - AL 2 O 3 Stir Cast MMC Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.01.105

[82]	Multi-Response Optimization of Al2024/red mud MMC using Hybrid Taguchi-GRA-Entropy Optimization Technique Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.12.048

[83]	Optimization of friction and wear behaviour of Al7075-Al2O3-B4C metal matrix composites using Taguchi method IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/314/1/012025

[84]	A Study on Mechanical Properties of Al-17Si Metal Matrix Composites IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/376/1/012100

[85]	Fabrication of Al6061-Al2O3 composite through liquid metallurgy technique IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/402/1/012148

[86]	Investigation of Reinforced Composite Aluminum Materials International Journal of Applied Physics and Mathematics, 2018 DOI:10.17706/ijapm.2018.8.4.90-104

[87]	Investigations on the Effect of Molybdenum (Mo) and Molybdenum Silicon Carbide (Mo-10% Sic) Composite Coatings on Mild Steel Substrate using HVOF Technique Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.238

[88]	Mechanical and tribological behavior of SiC and fly ash reinforced Al 7075 composites compared to SAE 65 bronze Materials Testing, 2018 DOI:10.3139/120.111272

[89]	Mechanical and Tribological Properties of AA7075 Based MMC Processed through Ultrasound Assisted Casting Technique Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.11.009

[90]	Influence of T6-heat treatment on mechanical properties of Al7075 alloy reinforced with Cenosphere Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.304

[91]	Evaluation of Al7075 Reinforced with SiC for its Mechanical Properties & Surface Roughness by Drilling Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.313

[92]	Surface quality and material removal rate in turning aluminium matrix composite – a grey relational approach Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.145

[93]	Drilling Parameters Optimization and Characterization of Al7075 Reinforced with Al2O3 Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.310

[94]	Investigation on mechanical properties of aluminium 7075 - boron carbide - coconut shell fly ash reinforced hybrid metal matrix composites China Foundry, 2018 DOI:10.1007/s41230-018-8105-3

[95]	Fabrication and characterization of the Al6063/5%ZrO2/5%Al2O3composite IOP Conference Series: Materials Science and Engineering, 2017 DOI:10.1088/1757-899X/178/1/012011

[96]	Dry Sliding Wear Performance of Al/7075/Al 2 O 3p /Gr p Hybrid Metal Matrix Composites Materials Today: Proceedings, 2017 DOI:10.1016/j.matpr.2017.02.186

[97]	Exploration of Mechanical behaviour and Wear Behaviour of Al 4 C 3 Reinforced Aluminium Metal Matrix Composites Materials Today: Proceedings, 2017 DOI:10.1016/j.matpr.2017.02.181

[98]	Effect of Alumina on Green Properties of Al-Fe-Cr Powder Composites IOP Conference Series: Materials Science and Engineering, 2017 DOI:10.1088/1757-899X/225/1/012171

[99]	Mechanical and tribological behavior of the metal matrix composite AA6061/ZrO2/C Journal of Mechanical Science and Technology, 2017 DOI:10.1007/s12206-017-0917-3

[100]	Aluminium Alloys - Recent Trends in Processing, Characterization, Mechanical Behavior and Applications 2017 DOI:10.5772/intechopen.71399

[101]	Investigation on Mechanical Properties and Analysis of Dry Sliding Wear Behavior of Al LM13/AlN Metal Matrix Composite Based on Taguchi's Technique Journal of Tribology, 2017 DOI:10.1115/1.4035155

[102]	Corrosion Behavior of Al–Mg–Zn-Si Alloy Matrix Composites Reinforced with Y₂O₃ in 3.5% NaCl Solution International Journal of Electrochemical Science, 2017 DOI:10.20964/2017.08.59

[103]	Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review Procedia Technology, 2016 DOI:10.1016/j.protcy.2016.05.052

[104]	Effect of Carbon Fiber Rod Reinforcement on Slurry Erosive Behavior of Al6061 Composites Procedia Technology, 2016 DOI:10.1016/j.protcy.2016.08.179

[105]	Experimental investigations on mechanical behavior of aluminium metal matrix composites IOP Conference Series: Materials Science and Engineering, 2016 DOI:10.1088/1757-899X/149/1/012121

[106]	Al6061 Hybrid Metal Matrix Composite Reinforced with Alumina and Molybdenum Disulphide Advances in Materials Science and Engineering, 2016 DOI:10.1155/2016/6127624

[107]	Physico-Chemical Characterization of Novel Epoxy Matrix System Reinforced with Recycled Short Milled Carbon Fibre Journal of Minerals and Materials Characterization and Engineering, 2015 DOI:10.4236/jmmce.2015.35040

[108]	Wear Behavior and Micro-structural Study of Al/Al2O3Nano-composites Before and After Heat Treatment Materials Today: Proceedings, 2015 DOI:10.1016/j.matpr.2015.07.143

[109]	The Mechanical Characterization of Al₂O₃ Reinforced AL6061 Metal Matrix Composite Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.766-767.257

[110]	Evaluation of Mechanical Properties of Aluminium Alloy 7075 Reinforced with SiC and Al₂O₃ Hybrid Metal Matrix Composites Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.766-767.246

[111]	Optimization of FSW Process Parameters for AlSiCp PRMMC Using ANOVA Materials Today: Proceedings, 2015 DOI:10.1016/j.matpr.2015.07.195

[112]	Taguchi Grey Relational Analysis of Dry Sliding Wear Behaviour of Annealed AA7075-TiC Metal Matrix Composites Applied Mechanics and Materials, 2014 DOI:10.4028/www.scientific.net/AMM.541-542.258

[113]	Preparation and Mechanical Characterization of Stir Cast Hybrid Al7075-Al₂O₃-B₄C Metal Matrix Composites Applied Mechanics and Materials, 2014 DOI:10.4028/www.scientific.net/AMM.592-594.705

[114]	Properties of ceramic-reinforced aluminium matrix composites - a review International Journal of Mechanical and Materials Engineering, 2014 DOI:10.1186/s40712-014-0012-9

[115]	Experimental Investigation of Al6061/Al2O3 Composite and Analysis of its Mechanical Properties on Onshore Wind Tower using Hybrid Technique for Indian Condition Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.252

[116]	Preparation, Characterization and Machinability of Al7075-Al2O3 Matrix Composite Using Multi Layer Coated Carbide Insert Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.469

[117]	Fabrication, Surface Morphology and Corrosion Investigation of Al 7075-Al2O3 Matrix Composite in Sea Water and Industrial Environment Procedia Engineering, 2014 DOI:10.1016/j.proeng.2014.12.289

[118]	Effect of Machining Parameters on the Surface Roughness while Turning Particulate Composites Procedia Engineering, 2014 DOI:10.1016/j.proeng.2014.12.266

[119]	Machining Behavior of Al6061-Fly Ash Composites Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.347

[120]	Electroless Plating of Al₂O₃ Particles Reinforced Composites Advanced Materials Research, 2013 DOI:10.4028/www.scientific.net/AMR.789.66

[121]	Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites Composites Part B: Engineering, 2013 DOI:10.1016/j.compositesb.2013.05.012

[122]	Effect of Processing Parameters on Friction Stir Welded Aluminum Matrix Composites Wear Behavior Materials and Manufacturing Processes, 2012 DOI:10.1080/10426914.2012.700156

[123]	Analysis of Parameters Influencing Wear and Frictional Behavior of Aluminum–Fly Ash Composites Tribology Transactions, 2012 DOI:10.1080/10402004.2012.700763

[124]	Fabrication and Characterization of SiC, Al₂O₃ and B₄C Reinforced Al-Zn-Mg-Cu Alloy (AA 7075) Metal Matrix Composites: A Study Advanced Materials Research, 2012 DOI:10.4028/www.scientific.net/AMR.622-623.1295

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies