"Polyetheretherketone (PEEK) Composites Reinforced with Fly Ash and Mica"
written by M. Rahail Parvaiz, Smita Mohanty, Sanjay K. Nayak, P. A. Mahanwar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Effect of filler percentage on physical and mechanical characteristics of basalt fiber reinforced epoxy based composites
2020
[2] Role of Fillers on Physico-Mechanical Properties of POM Based Hybrid Composites
2019
[3] Preparation and Study of the Mechanical Properties of Unsaturated Polyester Resin/Graphene Nanocomposite
2019
[4] Structure, mechanical and thermal properties of polypropylene based hybrid composites with banana fiber and fly ash
2019
[5] Tribology of the PEEK Polymer Filled with Solid Lubricants
Handbook of Polymer Tribology, 2018
[6] INFLUENCE OF VACUUM APPLICATION ON THE TRIBOLOGICAL PROPERTIES OF PORCELAIN WASTE REINFORCED EPOXY COMPOSITES
2018
[7] Formulation of a covalently bonded hydroxyapatite and poly (ether ether ketone) composite
2018
[8] Stability of Amorphous PEEK in Organic Solvents
2018
[9] Porselen Atık Takviyeli Epoksi Kompozitlerinin Tribolojik Özelliklerine Vakum Uygulamasının Etkisi
Selçuk Üniversitesi Mühendislik, Bilim Ve Teknoloji Dergisi, 2018
[10] Application of box‐behnken design and neural computation for tribo‐mechanical performance analysis of iron‐mud‐filled glass‐fiber/epoxy composite and parametric optimization using PSO
Polymer Composites, 2018
[11] Experimental Investigation, Modeling, Simulation and Optimization of Molded Interconnect Devices (MID) Based on Laser Direct Structuring (LDS)
2017
[12] Kinetics of thermal decomposition of PVC/Fly ash composites
Artificial Cells Nanomedicine and Biotechnology, 2017
[13] Comparison between the Mechanical and Morphological Properties of Binary Polymer Blends
2017
[14] Production and characterization of a hybrid polymer matrix composite
Polymer Composites, 2017
[15] Experimental lnvestigation, Modeling, Simulation and Optimization of Molded lnterconnect Devices (MID) Based on Laser Direct Structuring (LDS)
2017
[16] FABRICATION AND CHARECTERIZATION OF MULTILAYER GFRP COMPOSITES WITH DIFFERENT ORIENTATIONS
2017
[17] Property evaluation of nanostructured fly ash-reinforced acrylonitrile butadiene styrene nanocomposites
Journal of Thermoplastic Composite Materials, 2016
[18] Fire Retardancy Characteristics and Mechanical Properties of High Density Polyethylene/Ultrafine Fly Ash/MWCNT Nanocomposites
Arab Journal of Basic and Applied Sciences, 2016
[19] Modification of Epoxy Resin with Silicone Rubber and In-situ Generated Alumina Silicates
Journal of Polymer Materials, 2016
[20] Mechanical characterizations and development of erosive wear model for Al2O3-filled short glass fiber-reinforced polymer composites
2016
[21] Epoxy Matrix Composites Containing Urea Formaldehyde Waste Particulate Filler
Waste and Biomass Valorization, 2016
[22] High-performance fire-resistant polymeric nanocomposite for aerospace applications
2016
[23] Properties of rigid polyvinyl chloride foam composites reinforced with different shape fillers
Journal of Thermoplastic Composite Materials, 2016
[24] Melt rheological studies of polypropylene filled with coconut water treated and untreated fly ash
Journal of Applied Polymer Science, 2016
[25] Effect of untreated Cenosphere on Mechanical properties of Nylon-6
International Journal on Recent and Innovation Trends in Computing and Communication, 2015
[26] Evaluation of Thermal and Morphological Properties of Nylon 6/Cenosphere Composites
International Journal on Recent and Innovation Trends in Computing and Communication, 2015
[27] Studies on Physical and Mechanical Properties of Silica Fume-Filled Nylon 66 Polymer Composites for Mechanical Components.
Polymers & Polymer Composites, 2015
[28] 聚氯乙烯/粉煤灰复合材料加工特性及性能研究
工程塑料应用, 2015
[29] International Journal of Advance Engineering and Research Development
2015
[30] Structural and Mechanical Characterization of Sustainable Composites Based on Recycled and Stabilized Fly Ash
Materials, 2014
[31] Development and Characterization of Fly Ash Reinforced Natural Rubber Composite
Journal of Polymer Materials, 2014
[32] Comparative Study on the Wear Properties of Fly Ash and Silica Fume Filled Nylon Composites
Applied Mechanics and Materials. Trans Tech Publications, 2014
[33] Studies on thermal, electrical and flame properties of surface modified cenosphere filled ABS composites
International Journal of Plastics Technology, 2014
[34] TENSILE AND FLEXURAL STRENGTH OF GLASS FIBER EPOXY COMPOSITES
International Conference on Advanced Materials and manufacturing Technologies (AMMT), 2014
[35] Electrical, structural, and optical characterization of coal ash–PEO/PMMA blend composites
Ionics, 2014
[36] Surface characterization of modified fly ash for polymer filler applications: A case study with polypropylene
Materials Express, 2014
[37] Investigation of Dielectric Properties of Industrial Waste Reinforced Particulate Polymer Composites
Advances in Materials Science and Engineering, 2014
[38] Evaluation of properties of industrial waste filled polymer composites for automobile applications
Materials Science and Technology, 2014
[39] Advanced Materials Manufacturing & Characterization
G Rajesh, AVR Prasad - ijammc-griet.com, 2013
[40] Thermal degradation and flammability studies of wood coated with fly ash intumescent composites
Journal of the Indian Academy of Wood Science, 2013
[41] The Effect of Addition Slag of Cast Iron and Cement to Unsaturated Polyester on Impact and Bending Properties
2013
[42] PREPARATION AND CHARACTERIZATIONS OF ACRYLONITRILE BUTADIENE STYRENE (ABS)-CENOSPHERE COMPOSITES
JR DESAI, SC SHIT, MD SHAH, SK JAIN - ejournal.aessangli.in, 2013
[43] 聚合物/粉煤灰复合材料研究进展
化工新型材料, 2013
[44] Evaluation of Flexural Properties of Fly Ash Filled Polypropylene Composites
J Gummadi, GV Kumar, G Rajesh - ijmer.com, 2012
[45] Viscoelastic, mechanical, and thermal characterization of fly ash‐filled ABS composites and comparison of fly ash surface treatments
Polymer Composites, 2012
[46] Effect of particle size of mica on the properties of poly [ether ether ketone] composites
Polymer-Plastics Technology and Engineering, 2011
[47] Exploring potential of Micro-Raman spectroscopy for correlating graphitic distortion in carbon fibers with stresses in erosive wear studies of PEEK composites
Wear, 2011
[48] Rigid ballistic composites (Review of literature)
2010
[49] Fabrication and testing of PVC composites with flyash and mica as hybrid reinforcements