"Sensitisation Study of Normalized 316L Stainless Steel"
written by P. Atanda, A. Fatudimu, O. Oluwole,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel
2019
[2] Effect of post weld thermal aging (PWTA) sensitization on micro-hardness and corrosion behavior of AISI 304 weld joints
2019
[3] Electrochemical Impedance Analysis on Cryogenically Treated Dissimilar Metal Welding of 316L Stainless Steel and Monel 400 Alloy Using GTAW
2019
[4] Influence of structure sensitising of the AlSi 316Ti austenitic stainless steel on the ultra-high cycle fatigue properties
Machine Modelling and Simulations 2017 (MMS 2017), 2018
[5] Interfacial Shear Stress with Pull-out Test at Zeolite Ceramic Matrix and SS316 Single Fiber
2018
[6] Effect of TIG Welding Parameter of Welded Joint of Stainless Steel SS304 by TIG Welding
2018
[7] ACTA TECHNICA CORVINIENSIS
2017
[8] Influence of the heat treatment procedure on the stress corrosion cracking behaviour of low pressure turbine blade material FV566
2017
[9] Modification of Stainless Steel Surfaces for Advanced Functionalities
2017
[10] Giga-cycle Fatigue of AISI 316L after Sensitising of Structure
Procedia Engineering, 2017
[11] Investigation of Pitting Corrosion in Sensitized Modified High-Nitrogen 316LN Steel After Neutron Irradiation
Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, 2017
[12] A Review on Pulsed TIG welding
2017
[13] Characterization of simultaneous aged and plasma nitrided 17-4 PH stainless steel
Materials Characterization, 2017
[14] Altlık Tipinin Krom Karbür Çökelmesi Üzerine Etkisinin Araştırılması
El-Cezeri Journal of Science and Engineering, 2017
[15] Altlık Tipinin Östenitik Çeliklerde Krom Karbür Çökelmesi Üzerine Etkisinin Araştırılması
El-Cezerî Journal of Science andEngineering, 2017
[16] www. jru. edu
2017
[17] Advancement in manufacturing processes
2017
[18] ANALYSIS OF SENSITIZATION IN AUSTENITIC STAINLESS STEEL WELDED JOINT
2017
[19] EFFECTS OF HEAT TREATMENT PROCESS ON MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF GRAY CAST IRON.
2016
[20] Mechanical Properties and Immersion Characteristics of Sensitinized STS310S, STS316L and STS347H in the Range of 480~ 720℃
2016
[21] Investigation and analysis of high temperature corrosion and degradation of marine boiler combustion swirler
Journal of Marine Science and Application, 2016
[22] Wettability control of stainless steel surfaces via evolution of intrinsic grain structures
Journal of Materials Science, 2016
[23] Effect of cryogenic treated electrodes on sensitization in resistance spot welding of stainless steel.
Advanced Materials Research, 2016
[24] Effect of Low Temperature Sintering on the Porosity and Microstructure of Porous Zeolite Ceramic
Applied Mechanics and Materials, 2016
[25] On the corrosion resistance of AISI 316L-type stainless steel coated with manganese and annealed with flow of oxygen
Journal of Theoretical and Applied Physics, 2016
[26] Corrosion and thermal processing in cold gas dynamic spray deposited austenitic stainless steel coatings
2016
[27] Effect of Electrode Polarity and Heat Input on Fusion Zone Characterization of Tig Welded Austenitic Stainless Steel
International Journal on Scientific Research in Emerging Technologies, 2016
[28] Austenitic steel grades for boilers in ultra-supercritical power plants
2016
[29] An experimental study on CO2 laser beam welding of AISI 304SS and Cu dissimilar pipes
International Journal of Mechatronics and Manufacturing Systems, 2016
[30] EFFECTS OF HEAT TREATMENT PROCESS ON MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF GRAY CAST IRON
Acta Technica Corvininesis-Bulletin of Engineering, 2016
[31] Combined Effect of Base Metal Dilution and Thermal Aging Conditions on the Corrosion Performance of Stainless Steel Claddings
2016
[32] Effect of Plasma Discharging Condition on Growth Behavior of Nano-wire Formed on Tool Steel Substrate
Advanced Experimental Mechanics, 2016
[33] Development of Post Treatment Process for Laser Cutting Cardiovascular Stents
2016
[34] 480∼ 720℃ 에서 예민화한 STS310S, STS316L 및 STS347H 의 기계적 성질 및 침지 특성
Journal of the Korean Society for Power System Engineering, 2016
[35] Development of regression models of GTAW process parameter of Inconel 825 by using factorial design approach
Advances in Natural and Applied Sciences, 2016
[36] Cr-free Si 변성 유/무기하이브리드 코팅액에 의한 열화된 STS310S 및 STS347H 의 내식성
Journal of the Korean Society for Power System Engineering, 2015
[37] 열화한 STS316L 에 대한 Cr-free 코팅액의 내식특성
2015
[38] Selective Laser Melting for production of injection moulds
2015
[39] Mathematical Modeling of Sensitization in Resistance Spot Welding of SS
Materials Science Forum, 2015
[40] Tensile deformation of 316L austenitic stainless steel using in-situ electron backscatter diffraction and crystal plasticity simulations
Materials Science and Engineering: A, 2015
[41] Effect of heat treatment on microstructure and residual stress fields of a weld multilayer austenitic steel clad
Journal of Materials Processing Technology, 2015
[42] Analysis of Sensitization of Austenitic Stainless Steel By Different Welding Processes: A Review.
International Journal of Applied Engineering Research, 2015
[43] Analysis of the Effect of Sensitization on Austenitic Stainless Steel 304L Welded By GTAW Process
HCTL Open International Journal of Technology Innovations and Research (IJTIR), 2015
[44] INVESTIGATIONS FOR STATISTICALLY CONTROLLED RESISTANCE SPOT WELDING SOLUTION OF STAINLESS STEEL
Journal of Mechanical Engineering, 2015
[45] Failure Analysis of the Liner Plate of CDQ Chamber Made of AISI 310
Journal of Failure Analysis and Prevention, 2015
[46] Corrosion Resistance of Degraded STS310S and STS347H by Cr-free Modified Si Organic/Inorganic Hybrid Coating Solution
2015
[47] Microstructural Variations Across a Dissimilar 316L Austenitic: 9Cr Reduced Activation Ferritic Martensitic Steel Weld Joint
Metallurgical and Materials Transactions A, 2015
[48] Corrosion Resistance Characteristics of Cr-free Coating Solution for Degraded STS316L
2015
[49] THESIS to obtain the degree of Doctor
2014
[50] A THERMOKINETIC IMPACT STUDY OF DE-SENSITISATION OF AISI 304L WELDMENTS
2014
[51] Parametric optimization of gas tungsten arc welding process by using factorial design approach
J. Sci. Ind. Res, 2014
[52] Research on Gas Tungsten Arc Welding of Stainless Steel–An Overview
D Devakumar, DB Jabaraj - ijser.org, 2014
[53] A STUDY ON WEAR AND CORROSION CHARACTERISTICS OF MARINE PROPELLER SHAFT MATERIAL-AISI 316L STAINLESS STEEL SUBJECT TO CRYOGENIC TREATMENT
J Suresh, S Suthagar - ijaert.org, 2014
[54] Parametric Optimization of Gas Tungsten Arc Welding Processes by Using Factorial Design Approach
C Prabaharan, P Venkatachalam - nopr.niscair.res.in, 2014
[55] Nieuw: 30 jaar THe CaT
EIJ Met, W Den Hartog, 2014
[56] PENGARUH PROSES ANIL TERHADAP PERUBAHAN STRUKTUR MIKRO DENDRITIK KE EQUIAXIAL DAN KEKERASAN PADA BAJA TAHAN KARAT AUSTENIT YANG MENGANDUNG UNSUR TITANIUM DAN YTTRIUM SEBAGAI
2014
[57] PENGARUH VARIASI KECEPATAN PENGELASAN GMAW BAJA TAHAN KARAT AUSTENITIK AISI 316L TERHADAP STRUKTUR MIKRO DAN SIFAT MEKANIK
Prosiding Seminar Nasional Sains Dan Teknologi Fakultas Teknik, 2014
[58] Membrane distillation with porous metal hollow fibers for the concentration of thermo-sensitive solutions
2014
[59] Thin Inorganic Porous Hollow Fiber Membranes
Encyclopedia of Membrane Science and Technology, 2013
[60] Investigation of the production and mechanical properties of porous Beta Titanium alloy compacts prepared by powder metallurgy processes for biomedical applications
2013
[61] Weldability and process parameter optimization of dissimilar pipe joints using GTAW
International Journal of Engineering research and applications, 2012
[62] PENGARUH PROSES ROL DAN PERLAKUAN PANAS PADA INGOT BAJA TAHAN KARAT AUSTENIT YANG MENGANDUNG UNSUR Ti DAN Y TERHADAP STRUKTUR MIKRO DAN KEKERASAN
Jurnal Sains dan Teknologi Nuklir Indonesia, 2012
[63] PENGARUH PROSES ANIL TERHADAP PERUBAHANSTRUKTUR MIKRO DENDRITIK KE EQUIAXIAL DANKEKERASAN PADA BAJA TAHAN KARAT AUSTENIT YANGMENGANDUNG UNSUR TITANIUM DAN YTTRIUM SEBAGAIBAHAN KOMPONEN REAKTOR DAYA BERPENDINGIN NANO
2012
[64] Structure and Tribological Properties of Post-sputtered Annealing Nickel Titanium Alloy Coatings Onto 316L Stainless Steel
2012