Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite"
written by Manoj Singla, D. Deepak Dwivedi, Lakhvir Singh, Vikas Chawla,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2009
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Tribological Behaviour of Al 7075 Alloy Reinforced with Nano-Alumina and Silicon Carbide Particulates
2021
[2] Experimental studies of different quenching media on mechanical and wear behavior of Al7075/SiC/Al2O3 hybrid composites
2021
[3] A review on metal matrix composite for automobile applications
2021
[4] Influence of the fly ash material inoculants on the tensile and impact characteristics of the aluminum AA 5083/7.5 SiC composites
2021
[5] Fabrication and Characterization of Al6061 with Boron Carbide Metal Matrix Composites
2021
[6] Investigation on Microstructural and Mechanical Properties of Microwave Welded Al6061-SiC-Graphite Hybrid Metal Matrix Composites
2021
[7] Investigations on Al 7075/nano-SiC/B4C hybrid reinforcements using liquid casting method
2021
[8] Effect of the Parametric Processes in Stir-Casting Technique for Aluminium Based Composite Development: A review
2021
[9] Scientific African
2021
[10] Evaluation of Mechanical performance on developed AA 6061Matrix-Mg/0.9-Si/0.68 reinforced with B4C based Composites
Functional Composites and Structures, 2021
[11] Study of Microstructure and Mechanical Properties of Ball milled Nano-SiC Reinforced Aluminium Matrix Composites
2021
[12] Multi-objective optimization of process parameters in dry sliding wear characteristics of Al/sic composites using Taguchi grey relation analysis
2021
[13] Influence of micro B 4 C ceramic particles addition on mechanical and wear behavior of aerospace grade Al-Li alloy composites
2021
[14] Optimization on Operation Parameters in Reinforced Metal Matrix of AA6066 Composite with HSS and Cu
2021
[15] Wear and Friction Behavior of Gr/Sn Solid Lubricated Dual Reinforced AMCs
2021
[16] The Prediction of Stress and Strain Behaviors in Composite Gears using FEM
2021
[17] Study the Mechanical Behaviour of Al 7075 with Silicon Nitride by Computer Analysis & Stir Casting
International Journal of Innovative Science and Research Technology, 2021
[18] Mechanical and microstructural characteristics of Aluminium 6063 Alloy/Palm Kernel shell composites for lightweight applications
2021
[19] A Review on the Significance of Hybrid Particulate Reinforcements on the Mechanical and Tribological Properties of Stir-Casted Aluminum Metal Matrix Composites
2021
[20] Dry Sliding Wear Study of Solid Lubricants and Sillimanite-Reinforced Aluminum Alloy Composites
2021
[21] Synthesis and development of size hybrid nano SiC-Al7075 composites by advanced stir casting
2021
[22] Eggshell and rice husk ash utilization as reinforcement in development of composite material: A review
2021
[23] Enhancement of mechanical characterization of aluminum alloy with tungsten carbide metal matrix composite by particulate reinforcements
2021
[24] The influence of imperfect interfaces on the measurable effective properties of ceramic composites
2021
[25] Experimental analysis and characterization of Mechanical, Physical properties of Aluminium (Al6061) Metal Matrix composite reinforced with SiC and Al2O3 using Stir …
2021
[26] Mechanical Behavior in Tungsten Carbide-Reinforced Aluminum Composites
2021
[27] Study on Mechanical Properties of AA6061/SiC/B4C Hybrid Nano Metal Matrix Composites
2021
[28] Development of Hybrid Nanocomposites by Stir Casting Technique Using Two-Step Mixing
2021
[29] Evaluation of mechanical performance on a developed AA 6061matrix-Mg/0.9-Si/0.68 reinforced with B4C based composites
2021
[30] Effect of Reinforment of Particles on the Mechanical Properties of Al6065-SiC, Al6065-Al2O3, Hybrid Composites by Modified Stir Casting Method
2021
[31] Effect of dual reinforced ceramic particles on elevated temperature tribological properties of hybrid aluminium matrix composites
2021
[32] Pengaruh Kecepatan Pengadukan pada Proses Stircasting terhadap Sifat Mekanik pada Paduan Aluminium
2021
[33] Desarrollo y evaluación de películas de alcohol polivinílico y óxidos de grafeno termorreducidos (PVA-TRGOS) para su potencial uso como vehículo de inclusión en …
2020
[34] МЕТАЛЛИЗАЦИЯ СИСТЕМОЙ TI-CU МЕТАЛЛОМАТРИЧНОГО КОМПОЗИТА ALSIC
2020
[35] Wear Behaviour Analysis of Silicon Carbide based Aluminium Metal Matrix Composites
2020
[36] Vibration and Acoustic Characteristics of Aluminium Silicon Carbide Metal Matrix Composite Under Uniform and Non Uniform Thermal Environment
2020
[37] Mechanical & Tribological Behaviors of Aluminium Metal Matrix/Hybrid Metal Matrix Composites: A Review
JOURNAL OF CRITICAL REVIEWS, 2020
[38] Using Entropy Weight and Over All Evaluation Criteria Optimize the Parameters in EDM of Al–20 Wt.% SICP MMC
2020
[39] Effect of Double and Triple Particle Size Al 2 O 3 Reinforcement on Properties of AMC Prepared by Vacuum Moulding
2020
[40] Development and properties evaluation of marble dust reinforced ZA-27 alloy composites for ball bearing application
Materials Research Express, 2020
[41] PREPARATION AND INVESTIGATION OF ALUMINIUM-ALUMINA METAL MATRIX COMPOSITE
2020
[42] Fabrication and Tribological Characteristics of Al6061-B4C Metal Matrix Composites
2020
[43] Mechanical properties of titanium carbide reinforced aluminum metal matrix composites
2020
[44] Mechanical and Microstructure Properties of Friction Stir Welding Joints of Aluminum Reinforced with Silicon Carbide Nanoparticles
International Journal of Engineering Research and Technology, 2020
[45] The comparative study of conventional and ultra-high frequency induction sintering behavior of pure aluminum
2020
[46] MECHANICAL AND TRIBOLOGICAL BEHAVIOUR OF AL 7075 HYBRID MNC'S USING STIR CASTING METHOD
International Journal of Mechanical and Production Engineering Research and Development, 2020
[47] Property Evaluation of Hybrid Metal Matrix Composite
2020
[48] Study on Mechanical Properties of Al6063 Reinforced with Sic & Tur Husk
2020
[49] Cutting temperature prediction model and parametric optimization in turning aluminium matrix composite
2020
[50] CHARACTERISATION OF STIR-CAST FERROTITANIUM AND SILICON CARBIDE REINFORCED ALUMINIUM MATRIX COMPOSITES
2020
[51] SiC Reinforcement in the Synthesis and Characterization of A356/AL 2 O 3/Sic/Gr Reinforced Composite-Paving a Way for the Next Generation of Aircraft Applications
2020
[52] Investigation of SiC and AL2O3–Reinforced with aluminium composites-A review
2020
[53] Mechanical properties of aluminium metal matrix composites-A review
2020
[54] ОСОБЕННОСТИ ПОЛУЧЕНИЯ НИЗКОНАПОЛНЕННЫХ ДИСПЕРСНО-УПРОЧНЕННЫХ АЛЮМОМАТРИЧНЫХ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ
2020
[55] Mekanik Alaşımlama Metodu ile Üretilen Al-4.5 Cu/SiC Kompozitin Termal ve Mikroyapısal Özelliklerinin İncelenmesi
2020
[56] Effects of Reinforcement Ratios and Sintering Temperatures on the Mechanical Properties of Titanium Nitride/Nickel Composites
2020
[57] MULTI-RESPONSE OPTIMIZATION OF AA1100 MMC THROUGH MIXTURE DoE
2020
[58] Mechanical Properties and Wear Characteristic of (Aluminum-Zinc Oxide) Metal Matrix Composite Prepared Using Stir Casting Process
2020
[59] Comparison studies on mechanical and wear behavior of Stir Cast Al-SiC-B4C metal matrix composites
2020
[60] Effects of particle size and surface modification of SiC on the wear behavior of high volume fraction Al/SiCp composites
2020
[61] Incorporation of SiC Ceramic Nanoparticles into the Aluminum Matrix by a Novel Method: Production of a Metal Matrix Composite
2020
[62] Manufacturing techniques for metal matrix composites (MMC): an overview
2020
[63] Selective laser melting of aluminium metal-matrix composites and the challenges
2020
[64] Automotive industry application of aluminium-based hybrid metal matrix composite
2020
[65] Effect of Double and Triple Particle Size Al2O3 Reinforcement on Properties of AMC Prepared by Vacuum Moulding
2020
[66] Influence of heat treatment on tribological behavior of Al/ZrO2/fly ash hybrid composite
2020
[67] Evaluation of thermal and mechanical properties of Al7475 alloy reinforced with SiC and graphite
2020
[68] Thixoforming and Rheo-Die-Casting of A356/SiC Composite
2020
[69] Analysis of mechanical and wear properties of Al2O3+ SiC+ B4C/AA5083 hybrid metal matrix composite done by stir casting route
2020
[70] Forming behaviour of aluminium matrix nano Al2O3 composites for automotive applications
2020
[71] Fabrication and characterization of stir cast Al2024/SiCp metal matrix composite
2020
[72] Surface characterization and mechanical behavior of aluminum based metal matrix composite reinforced with nano Al2O3, SiC, TiO2 particles
2020
[73] Study and development of aluminium metal matrix composite with SiC using stir casting process
2020
[74] Effect of substituting SiC in varying proportions for TiC in Al-5052/TiC/SiC hybrid MMC
2020
[75] Biowaste Management: Banana Fiber Utilization for Product Development
2020
[76] Processing Methods and Mechanical Properties of Aluminium Matrix Composites
2020
[77] Study of age hardening process on Al/SiC/Al2O3 hybrid composite
2020
[78] Structure Property Correlation of In Situ Reinforced Al–based Metal Matrix Composite via Stir Casting
2020
[79] Characterization of microstructure, mechanical properties and corrosion response of aluminium-based composites fabricated via casting—a review
2020
[80] Effect of Sintering Temperature on Microstructure and Mechanical Properties of Aluminium Composites
2020
[81] Mechanical and microstructural analysis of Al-Al2O3/B4C hybrid composites
2020
[82] Analyzing the Effect of B4C/Al2O3 on the Wear Behavior of Al-6.6 Si-0.4 Mg Alloy Using Response Surface Methodology
2020
[83] Effects of stirring duration and casting temperature in ultrasonic assisted stir casting of Al A356 matrix composites
2020
[84] Experimental Investigations on Microstructure, Mechanical and Wear Behavior Under Dry Sliding of Al6061 with Particulate-Reinforced SiC and TiB2 Metal Matrix …
2020
[85] Evaluation of hardness and impact strength of aluminium alloy (LM6)–soda–lime composite
2019
[86] Coefficient of thermal expansion (CTE) study in metal matrix composite of CuSiC vs AlSiC
2019
[87] Study on mechanical properties of Metal Matrix Composites (MMCs) Al-Cu-Mg/SiCp with Powder Metallurgy
2019
[88] Review on Aluminium Silicon Carbide Metal Matrix Composite
International Journal of Engineering Research & Technology (IJERT), 2019
[89] Effect of Heat Treatment on Wear behavior of Hybrid Aluminum Metal Matrix Composites.
2019
[90] Fabrication and Properties of Aluminium Matrix Hybrid Nanocomposites By Stir Casting
International Journal of Recent Technology and Engineering, 2019
[91] Mechanical characteristics of Al-Al2O3-SiC metal matrix composites made by stir casting technique
2019
[92] Investigation of mechanical and wear behavior of Al based SiC reinforce metal matrix composite
2019
[93] DEVELOPMENT COMPARISONS OF AL-SiC MMC USING STIR CASTING PROCESS AND POWDER METALLURGY PROCESS FOR AUTOMOTIVE INDUSTRIES
International Journal of Mechanical and Production Engineering Research and Development, 2019
[94] Effects of silicon carbide contents on microstructure and mechanical properties of spark plasma–sintered titanium-based metal matrix
2019
[95] Review on effect of process parameter on Mechanical properties of Al-based MMC
2019
[96] PREPARATION OF AMCs BY STIR CASTING METHOD: A REVIEW
2019
[97] Study of mechanical properties of stir casted Al7075/SiCp composites after thermomechanical treatment
2019
[98] Effects of variations in the addition of SiCp filler to corrosion rate of metal matrix composites (MMCs) Al-Cu-Mg/SiCp
2019
[99] Comparison of Tensile Properties of Varying Size Boron Carbide Particulates Reinforced Al7475 Alloy Composites
Science, Technology and Development, 2019
[100] Preparation and Characterization of AA6061 Aluminum Alloy Composite Reinforced With Different Contents of Blast-Furnace Slag by Powder Metalurgy
MRS Advances, 2019
[101] MICROSTRUCTURE STUDIES AND MECHANICAL CHARACTERISATION OF T6 HEAT TREATED ALUMINIUM AND COPPER BASED ALLOY REINFORCED WITH ZIRCON AND GRAPHITE COMPOSITE
Journal of Engineering Science and Technology, 2019
[102] Microstructure and Compressive Behavior of Al–Y2O3 Nanocomposites Prepared by Microwave-Assisted Mechanical Alloying
2019
[103] Material characterization of SiC and Al2O3–reinforced hybrid aluminum metal matrix composites on wear behavior
2019
[104] PRODUCTION OF AA5754/B4C COMPOSITE MATERIALS BY THE SEMI-SOLID STIRRING METHOD
2019
[105] Green Design of Novel Metal Matrix Composites
2019
[106] Characterization and mechanical response of novel Al-(Mg–TiFe–SiC) metal matrix composites developed by stir casting technique
2019
[107] Investigation of Hardness and Tribological Behaviour of Aluminium Alloy LM30 Reinforced with Silicon Carbide, Boron Carbide and Graphite
2019
[108] Development and properties evaluation of marble dust reinforced ZA-27 alloy composites for ball bearing application
2019
[109] Analysis on Mechanical Behaviour of Binary and Hybrid Al2014 Metal Matrix Composites
2019
[110] Conventional stir casting versus ultrasonic assisted stir casting process: Mechanical and physical characteristics of AMCs
2019
[111] Silicon Carbide Effect as Reinforcement on Aluminium Metal Matrix Composite
2019
[112] Experimental Evaluation of Al-Zn-Al2O3 Composite on Piston Analysis by CAE Tools
2019
[113] Development and Property Evaluation of Aluminium Alloy Reinforced with Fly-Ash
Asian Journal of Applied Science and Technology (AJAST), 2019
[114] DEVELOPMENT AND CHARACTERIZATION OF HYBRID ALUMINUM METAL MATRIX COMPOSITES
2019
[115] Study of Hardness of Al-Sic Composites using stir casting Method.
2019
[116] Parameter optimization and characterization of environmental friendly aluminium hybrid metal matrix composites
2019
[117] Electro-mechanical, microstructure and corrosion properties of 85Al6063-15CFBP alloy for advance applications
2019
[118] Dry sliding wear behaviour of Al 7075/Al2O3/B4C composites using mathematical modelling and statistical analysis
2019
[119] FORMABILITY CHARACTERISTICS OF Al-Cu-TiC COMPOSITE MATERIAL DURING COLD UPSETTING
2019
[120] Production and characterization of SiC reinforced aluminum alloy matrix composites from waste beverages cans
2019
[121] Enhancement of toughness of SiC through compositing SiC-Al interpenetrating phase composites
2019
[122] Effect of SiC content on microstructure, mechanical and electrical properties of sintered Al-20Si-xSiC nanocomposites fabricated by mechanical alloying
2019
[123] Development Of Silicon Carbide Particle Reinforced Aluminium 6101 Metal Matrix Composite Using Two-Step Stir Casting
2019
[124] Silicon carbide (SiC) effect on mechanical properties and corrosion rates on composite Al/SiC and Al-Cu/SiC
2019
[125] OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi6Cu4–TiO2 COMPOSITE USING CENTRAL COMPOSITE DESIGN
2019
[126] Evaluation of Mechanical and Metallurgical Properties on Aluminium Hybrid Metal Matrix Composites
2019
[127] A Review on Metal Matrix Hybrid Composite Al/SiC/Gr
International Journal of Electro Mechanics and Mechanical Behaviour, 2019
[128] A LITERATURE REVIEW ON ALUMINIUM-7075 METAL MATRIX COMPOSITES
2019
[129] Processing and characterization of AA2024/Al2O3/SiC reinforces hybrid composites using squeeze casting technique
Iranian Journal of Materials Science and Engineering, 2019
[130] PRODUCTION OF AA7075/B4C COMPOSITE MATERIALS BY SEMI-SOLID STIRRING METHOD
2019
[131] Study of Tribological Behaviour of AA6351/SiC/Gr Hybrid Metal Matrix Composite using Taguchi Technique.
2019
[132] DEVELOPMENT COMPARISONS OF AL-SiC MMC USING STIR CASTING PROCESS AND POWDER METALLURGY PROCESS FOR AUTOMOTIVE …
2019
[133] Study of tribological behaviour of AA6351/SIC/Gr hybrid metal matrix composite using Taguchi technique
2019
[134] MICROSTRUCTURE STUDIES AND MECHANICAL CHARACTERISATION OF T6 HEAT TREATED ALUMINIUM AND COPPER BASED ALLOY REINFORCED …
2019
[135] Experimental Investigations on Microstructure, Mechanical and Wear Behavior Under Dry Sliding of Al6061
2019
[136] Hafif Metal Ana Fazlı Kompozit Malzeme Üretim Sisteminin Tasarım, İmalat Ve Performansının İncelenmesi
GAZ? üN?VERS?TES? FEN B?L?MLER? DERG?S? Part C: TASARIM ve TEKNOLOJ?, 2019
[137] Effect of CCBP doping on the multifunctional Al-0.5 Mg-15CCBP superalloy using liquid metallurgy process for advanced application
2019
[138] EFFECT OF ADDITION OF SIC AND AL2O3 ON WEAR BEHAVIOR OF HYBRID ALUMINUM METAL MATRIX COMPOSITES.
2019
[139] Mechanical properties of Al–Si–SiC composites
2019
[140] An Estimation Study on Fatigue transition Life of Nanocomposites Reinforced by AL2O3
2018
[141] Influence of T6-heat treatment on mechanical properties of Al7075 alloy reinforced with Cenosphere
2018
[142] Investigation of Mechanical Properties of SiC and Al2O3 Reinforcement in Aluminum Metal Matrix Composite Produced by Mechanical Stirring Promoted with Ultrasonic Stirring Application
19th International Metallurgy & Materials Congress, 2018
[143] Enhancing the Mechanical Properties of Metal Matrix Composite by Reinforcing Aluminium 6063 with Sic & Graphite
International Journal of Engineering Research & Technology, 2018
[144] Characterization of Aluminium Alloy 6063 Hybrid Metal Matrix Composite by Using Stir Casting Method
International Journal of Mechanical, Industrial and Aerospace Sciences, 2018
[145] Effect of machining parameters on surface roughness while turning metal matrix composites-an experimental approach
2018
[146] Mechanical Survey and Morphological Review of LM22 composite Coated with Multi Wall Carbon Nano Tubes
2018
[147] Mathematical Modeling of dry Sliding Wear Behaviour of Stir–Squeeze cast Aluminium Matrix Composite
2018
[148] Synthesis of aluminum-based Metal Matrix Composites (MMC) and experimental study of their properties
2018
[149] Synthesis, Consolidation and Modelling Study of AA2014-TiB2 Composite Prepared by Powder Metallurgy (P/M) Method
Materials Science Forum, 2018
[150] Influence of Solutionising and Aging Treatments on Mechanical Behavior of Stir-Cast Eutectoid Steel Powder Reinforced Al 7075 Metal Matrix Composites
2018
[151] A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
2018
[152] Graphical Representations of Experimental and ANN Predicted Data for Mechanical and Electrical Properties of AlSiC Composite Prepared by Stir Casting Method
IOP Conference Series: Materials Science and Engineering, 2018
[153] Preliminary Evaluations on Development of Recycled Porcelain Reinforced LM-26/Al-Si10Cu3Mg1 Alloy for Piston Materials
Silicon, 2018
[154] Zinc-aluminum (ZA-27)-based metal matrix composites: a review article of synthesis, reinforcement, microstructural, mechanical, and corrosion characteristics
The International Journal of Advanced Manufacturing Technology, 2018
[155] STUDY ON MECHANICAL BEHAVIOR OF BORON CARBIDE AND RICE HUSK ASH BASED ALUMINIUM ALLOY 6061 HYBRID COMPOSITE
International Journal of Technical Innovation in Modern Engineering & Science, 2018
[156] Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075–steel powder reinforced metal matrix …
Materials Research Express, 2018
[157] INVESTIGATION AND TRIBOLOGICAL CHARACTERIZATION OF HYBRID NANO MMC
International Journal of Scientific Research and Innovations, 2018
[158] Mechanical and Wear Behavior of Aluminium-Zircon Sand-Flyash Metal Matrix Composite
IOP Conference Series: Materials Science and Engineering, 2018
[159] Dry condition machining performance of T6 treated aluminium matrix composites
Materials Today: Proceedings, 2018
[160] The influence of Cu doped on structure and mechanical properties of aluminium material
The 3rd Annual Applied Science and Engineering Conference (AASEC 2018), 2018
[161] To compare the output characteristics in electric discharge machining using new and re-used tool on Aluminium silicon Carbide MMC.
International Journal of Management, Technology And Engineering, 2018
[162] Investigation on properties of SiC reinforced Zn-Mg-Cu based Al metal matrix composites-a case study
Materials Today: Proceedings, 2018
[163] Sİ3N4 TAKVİYESİYLE ATIK ALÜMİNYUMDAN ÜRETİLMİŞ KOMPOZİTLERİN ÖZELLİKLERİNİN İNCELENMESİ
Technological Applied Sciences, 2018
[164] THE EFFECT OF ROLLING CYCLES AND SETTING DIRECTION OF THE REINFORCEMENT ON ALUMINUM BASED COMPOSITE BY REPETITIVE PRESS ROLL …
2018
[165] Simulation of mushy state solidification in stir casting
World Journal of Engineering, 2018
[166] Investigation on mechanical behavior and material characteristics of various weight composition of SiCp reinforced aluminium metal matrix composite
IOP Conference Series: Materials Science and Engineering, 2018
[167] Fabrication of LM 25/WC functionally graded composite for automotive applications and investigation of its mechanical and wear properties
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018
[168] A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
"JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY", 2018
[169] Analysis of SiC grain size variation and NaCl concentration on the corrosion susceptibility of AA1070 aluminium matrix composites
Cogent Engineering, 2018
[170] Preparation and characterization of aluminium-silica metal matrix composite
AIP Conference Proceedings, 2018
[171] Parametric study of the dry sliding wear behaviour of AA6082-T6/SiC and AA6082-T6/B4C composites using RSM
Journal of Mechanical Science and Technology, 2018
[172] Synthesis of Al LM25/TiC Composite Using Squeeze Casting Method and Investigation of its Mechanical and Adhesive Wear properties
Materials Today: Proceedings, 2018
[173] Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composite
Journal of Alloys and Compounds, 2018
[174] TRIBOLOGICAL CHARACTERIZATION OF MICROWAVE PROCESSED AL-SIC METAL MATRIX COMPOSITES
INTERNATIONAL JOURNAL OF RESEARCH INAERONAUTICAL AND MECHANICAL ENGINEERING, 2018
[175] Preparation and characterization of ternary alloy (Al-20Cu-10Mg) reinforced aluminium composite
Materials Today: Proceedings, 2018
[176] Dry sliding wear characterization of red mud reinforced aluminium composite
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018
[177] Effect of SiC Reinforcement on Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite
IOP Conference Series: Materials Science and Engineering, 2018
[178] Development of Al-SiC MMC by bottom pouring stir casting and parametric analysis on EDM
International Research Journal of Engineering and Technology, 2018
[179] Experimental Characterization of Aluminum-Based Hybrid Composites Obtained Through Powder Metallurgy
IOP Conference Series: Materials Science and Engineering, 2018
[180] Development and Mechanical Properties of SiC Reinforced Aluminium Metal Matrix Composites
2018
[181] Characterization of the developed aluminium matrix composites-an experimental analysis
Materials Today: Proceedings, 2018
[182] Effect of Nano-Ceria on Physiognomies of Aluminum-5% Zinc Sacrificial Anode
2018
[183] Influence Of Mechanical &Tribological BehaviourOf Al 2024 MMC Fabricated By Stir Casting Technique-A Review
Materials Today: Proceedings, 2018
[184] EFFECT OF DATE SEED PARTICULATES ON MECHANICAL PROPERTIES OF ALUMINIUM ALLOY
Acta Technica Corvininesis - Bulletin of Engineering, 2018
[185] An Investigation on the Mechanical Properties of Nano-Al2O3 and TiC Reinforced Aluminum Matrix Hybrid Composites
Journal of Advanced Microscopy Research, 2018
[186] Corrosion Behavior of Cenosphere Reinforced Al7075 Metal Matrix Composite—An Experimental Approach
2018
[187] Aluminum Metal Matrix Composites with SiC, Al2O3 and Graphene–Review
2018
[188] An Experimental and Modeling Study of Synthesis, Consolidation and Aging Behavior of AA2014 Composite Reinforced by TiB2 via Powder Metallurgy Method
Transactions of the Indian Institute of Metals, 2018
[189] Technology Drivers: Engine for Growth: Proceedings of the 6th Nirma University International Conference on Engineering (NUiCONE 2017), November 23-25, 2017 …
Technology Drivers: Engine for Growth, 2018
[190] Tensile behavior of aluminum alloy (AA7050) metal matrix composite reinforced with graphene fabricated by stir and squeeze cast processes
Science and Technology of Materials, 2018
[191] Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites
Particulate Science And Technology, 2018
[192] Study of silicon carbide-reinforced aluminum matrix composite brake rotor for motorcycle application
The International Journal of Advanced Manufacturing Technology, 2018
[193] Surface Micro patterning of Aluminium Reinforced Composite for Aerospace Applications through High Energy Pulse Laser Peening
Materials Today: Proceedings, 2018
[194] Corrosion and Wear Studies On LM6 Grade Aluminum-Cenosphere Composite–An Experimental Approach
Materials Today: Proceedings, 2018
[195] Mechanical Characterization of Aluminium Hybrid Metal Matrix Composite
2018
[196] Influence of Edge Condition of Cutting Tool on Cutting Force and Surface Roughness While Machining Aluminum-Fly Ash Composites
Materials Today: Proceedings, 2018
[197] Influence Of Percent Filler On Tensile Strength, Impact Strength And Wear Properties Of The Al7075-Cenosphere Composite
Materials Today: Proceedings, 2018
[198] Studies on Mechanical Behaviour of Aluminium-Silicon Carbide-Copper Metal Matrix Composite
The 2nd International Conference on Mechanical, Aeronautical and Automotive Engineering (ICMAA 2018), 2018
[199] Characteristic behaviour of aluminium metal matrix composites: A review
Materials Today: Proceedings, 2018
[200] Microstructures and hardness of A356-SiC composites produced by the mechanical stir casting
Materials Today: Proceedings, 2018
[201] Synthesize and characterization of ceria based nano-composite materials for low temperature solid oxide fuel cell
International Journal of Hydrogen Energy, 2018
[202] Fabrication and Characterization of Aluminium Boron Nitride Composite for Fins
Materials Today: Proceedings, 2018
[203] Fabrication of Al/SiC Metal Matrix Composite by Stir Casting and Machinability Study by Micro-Drilling
2018
[204] Multi-Response Optimization of Al2024/red mud MMC using Hybrid Taguchi-GRA-Entropy Optimization Technique
Materials Today: Proceedings, 2018
[205] Fabrication & Mechanical Testing of AA6082/Si3N4 Composites
2018
[206] Wear study of Al-SiC metal matrix composites processed through microwave energy
AIP Conference Proceedings, 2018
[207] Characterization of AA6082/Si3N4 Composites
1st International Conference on New Frontiers in Engineering, Science & Technology, 2018
[208] Technology Drivers: Engine for Growth: Proceedings of the 6th Nirma University International Conference on Engineering (NUICONE 2017), November 23-25 …
2018
[209] THE EFFECT OF SILICON CARBIDE (SiC) ON PHYSICAL AND MECHANICAL PROPERTIES OF RECYCLED ALUMINIUM CHIP AA6061
2018
[210] Effect of nano ceria on physiognomies of aluminum-5% zinc sacrificial anode
2018
[211] Investigation of Mechanical Properties of SiC and Al2O3 Reinforcement in Aluminum Metal Matrix Composite Produced by Mechanical Stirring Promoted with Ultrasonic Stirring Application
Conference Paper, 2018
[212] Mechanical deformation behavior of aged Al-Cu alloys and innovative Al-Cu metal matrix composite fabricated using stir-casting technique
2018
[213] The effect of laser engraving on L-shaped Carbon Fiber Reinforced Polymer (CFRP) components during the curing process
2018
[214] Investigation of Mechanical Properties for Al-Sic-TiB2 Metal Matrix Composite
2018
[215] Prospects of effective use and production of particle-reinforced metal matrix composite alloys
2018
[216] Effect of Nano BN Addition on the Properties of an Aluminum Metal Matrix Composite
2018
[217] Characterization behaviour of aluminium matrix hybrid composite-A Review
2018
[218] Development of Al–SiC MMC by bottom pouring stir casting and parametric analysis on EDM
2018
[219] Graphical Representations of Experimental and ANN Predicted Data for Mechanical and Electrical Properties of AlSiC Composite Prepared by Stir Casting Method …
2018
[220] Experimental Investigation of Processes and Properties of Aluminium Matrix Composites
2018
[221] INVESTIGATION OF MECHANICAL PROPERTIES FOR Al-SiC-TiB2 METAL MATRIX COMPOSITE.
2018
[222] Development of Hybrid Aluminium Alloy Composite
2018
[223] Hardness and Wear analysis of Micro/nano sized sic reinforced aluMiniuM coMposites
I J A M R, 2017
[224] The Effect of ECAP on the Al6061 Matrix and Al-SiCp at Elevated Temperature
2017
[225] SiCp/Al 复合材料表面电镀 Ni-P 合金的工艺研究
2017
[226] Study of Mechanical and Corrosive Behaviour of Metal Alloy Composites-Ingrained with Micro and Hybrid Reinforcement
4th International Conference on Multidisciplinary Research & Practice, 2017
[227] Vibrational Analysis of Aluminium Graphite Metal Matrix Composite
International Journal of Engineering Research & Technology, 2017
[228] ELECTRICAL DISCHARGE MACHINING: STATE OF THE ART AND FUTURE PROSPECTS
International Journal of Latest Trends in Engineering and Technology, 2017
[229] APPLICATIONS AND MODELLING CHALLENGES OF METAL MATRIX COMPOSITES
2017
[230] Effects of Precipitation Hardening on Mechanical Properties of Multistage Stirred Cast AA6063 Composites
2017
[231] Assessment of the density and mechanical properties of particulate periwinkle shell-aluminium 6063 metal matrix composite (PPS-ALMMC) produced by two …
2017
[232] Influence of Nano TiO2 Particles on the Properties and Behaviour of A356 Aluminium Metal Matrix Composites
2017
[233] Fabrication and wear characterization of silicon carbide and copper reinforced aluminium matrix composite
Materials Discovery, 2017
[234] Investigation on Mechanical Properties and Analysis of Dry Sliding Wear Behavior of Al LM13/AlN Metal Matrix Composite Based on Taguchi's Technique
Journal of Tribology, 2017
[235] Metal Matrix Composites Processed through Powder Metallurgy Route
2017
[236] Influence of Nanoreinforced Particles (Al2O3) on Fatigue Life and Strength of Aluminium Based Metal Matrix Composite
Al-Khwarizmi Engineering Journal, 2017
[237] A Review on the Mechanical Properties of Aluminum Based Metal Matrix Composites (MMCs)
2017
[238] Aluminium Based Metal Matrix Composites: A Review of Reinforcement; Mechanical, Wear Properties
2017
[239] Surface Micro Patterning of Aluminium Reinforced Composite through Laser Peening
International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), 2017
[240] Synthesis and Mechanical Characterization of Aluminium Based MMC With SIC as Reinforcement
2017
[241] Manufacturing of AA2124 aluminum alloy metal matrix composites reinforced by silicon carbide processed by powder metallurgy techniques of high energy ball milling and hot extrusion
Materials Science Forum, 2017
[242] Optimization of gas protected stir casting process using GRA and TOPSIS
2017
[243] Evaluation of Mechanical Properties of Al6063 Alloy MMC Reinforced with SiC and Coconut Shell Ash
2017
[244] ВОЗДЕЙСТВИЕ СИНТЕЗИРУЕМОЙ НАНОКОМПОЗИЦИИ SiC-Al2O3 НА СТРУКТУРООБРАЗОВАНИЕ И ТРИБОТЕХНИЧЕСКИЕ СВОЙСТВА КОМПОЗИТА НА …
2017
[245] Effect of B4C/Fly Ash Addition on Wear and Mechanical Properties of Al-Cu-Mg Alloy
Engineering and Technology Journal, 2017
[246] Eco-friendly benzimidazolium based ionic liquid as a corrosion inhibitor for aluminum alloy composite in acidic media
Journal of Molecular Liquids, 2017
[247] ASSESSMENT OF THE DENSITY AND MECHANICAL PROPERTIES OF PARTICULATE PERIWINKLE SHELL-ALUMINIUM 6063 METAL MATRIX COMPOSITE (PPS-ALMMC) PRODUCED BY TWO-STEP CASTING
Acta Technica Corvininesis-Bulletin of Engineering, 2017
[248] Microstructural Investigation of Aluminium-Silicon Carbide Particulate Metal Matrix Composite Fabricated by Stir Casting
International Journal for Innovative Research in Science & Technology, 2017
[249] Effect of hybrid reinforcement of SiC and Al2O3 in Nylon-6 matrix on mechanical properties of feed stock filament for FDM
IETE Journal of Education, 2017
[250] Microstructures and characteristics of solid state recycling aluminium chips AA6061/Al-SiC composites fabricated by cold compaction method
AIP Conference Proceedings, 2017
[251] Microstructure and properties of sintered metal matrix composites reinforced with sic particles Mikrostruktura i właściwości spiekanych kompozytów o osnowie …
2017
[252] Assessment of some mechanical properties and microstructure of particulate periwinkle shell-aluminium 6063 metal matrix composite (PPS-ALMMC) produced by two …
Nigerian Journal of Technology, 2017
[253] Development of Bamboo Stem Ash-Al-Hybrid Reinforced with SiC Produced by Spin Casting Technique
American Journal of Engineering Research, 2017
[254] Multiobjective optimization of in situ process parameters in preparation of Al-4.5% Cu–TiC MMC using a grey relation based teaching–learning-based optimization algorithm
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2017
[255] Study of mechanical and tribological behaviour of Al/SiC/ZrO2 hybrid composites fabricated through powder metallurgy technique
Materials Research Express, 2017
[256] Studies on Non-traditional Machining of Metal Matrix Composites
Materials Today: Proceedings, 2017
[257] Corrosion Behavior of Recycling Al-Alloy Based Metal Matrix Composites Reinforced by Nano particles
Kurdistan Journal of Applied Research, 2017
[258] Analysis the Surface Roughness in Drilling of Aluminium Composites
International Journal of Engineering Technology, Management and Applied Sciences, 2017
[259] Properties of an Al/(Al2O3+ TiB2+ ZrB2) hybrid composite manufactured by powder metallurgy and hot pressing
Journal of Applied Mechanics and Technical Physics, 2017
[260] Characterization of mechanical properties and three‐body abrasive wear of functionally graded aluminum LM25/titanium carbide metal matrix composite …
Materialwissenschaft und Werkstofftechnik, 2017
[261] Fabrication and Testing of Aluminium 6061 Alloy & Silicon Carbide Metal Matrix Composites
2017
[262] A SIGNIFICANT REASSESS ON PERFORMANCE AND MACHINING OF METAL MATRIX COMPOSITES
2017
[263] Development and Analysis of Aluminium Based Alloy A356 Reinforced with Aluminium Nitride and Magnesium by Stir Casting Technique
2017
[264] GRA and ANN Integrated Approach for Photochemical Machining of Al/SiC Composite
Materials Today: Proceedings, 2017
[265] UJI PERFORMASI DISC BRAKE SEPEDA MOTOR MATERIAL KOMPOSIT MATRIKS ALUMINIUM BERPENGUAT PARTIKEL KERAMIK
2017
[266] Свойства гибридного композита Al/(Al2O3+TiB2+ZrB2), изготовленного с использованием методов порошковой металлургии и горячего прессования
2017
[267] Atık Alüminyumdan Elde Edilen Matrise Grafen Takviyesiyle Üretilen Kompozitlerin Özelliklerinin İncelenmesi
B?LD?R? ?ZETLER? K?TABI, 2017
[268] Investigation of properties of composites produced by reinforcement graphene matrix obtained from waste aluminium
2017
[269] Multi-objective Optimization of Mechanical Properties of Aluminium 7075-Based Hybrid Metal Matrix Composite Using Genetic Algorithm
Advances in 3D Printing & Additive Manufacturing Technologies, 2017
[270] Production and mechanical properties of nano SiC particle reinforced Ti–6Al–4V matrix composite
Transactions of Nonferrous Metals Society of China, 2017
[271] Aluminum Based Metal Matrix Composites: A Review Influence of Reinforced Particles; Techniques; Factors Affecting the Composite
2016
[272] Fabrication of Al–SiC–B 4 C metal matrix composite by powder metallurgy technique and evaluating mechanical properties
Perspectives in Science, 2016
[273] Effect of Sintering Temperature on the Properties of Aluminium-Aluminium Oxide Composite Materials
2016
[274] A Review on Properties of Aluminium Based Metal Matrix Composites via Stir Casting
International Journal of Scientific & Engineering Research, 2016
[275] EVALUATION OF FATIGUE AND CORROSION TEST OF Al LM13 REINFORCED WITH HEMATITE
International Journal of Research in Engineering and Technology , 2016
[276] Prediction of Mechanical Properties and Modeling on Sliding Wear Behaviour of LM25/TiC Composite Using Response Surface Methodology
Cogent Mathematics, 2016
[277] Study of Physical, Mechanical and Machinability Properties of Aluminium Metal Matrix Composite Reinforced with Coconut Shell Ash particulates
2016
[278] Effect of silicon carbide addition on the corrosion behavior of powder metallurgy Cu 30Zn brass in a 3.5 wt% NaCl solution
Journal of Alloys and Compounds, 2016
[279] STRUCTURAL ANALYSIS OF COMPOSITE MATERIAL HELICAL GEAR UNDER DIFFERENT LOADING CONDITION
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, 2016
[280] STRUCTURAL AND MODEL ANALYSIS OF A COMPOSITE MATERIAL DIFFERENTIAL GEARBOX ASSEMBLY
INTERNATIONAL JOURNA L OF ENGINEERING SCI ENCES & RESEARCH TECHNOLOGY, 2016
[281] Abrasive Wear Behaviour of Monolithic Alloy, Homogeneous and Functionally Graded Aluminium (LM25/AlN and LM25/SiO2) Composites
Journal of Biomaterials Science Polymer Edition, 2016
[282] Microstructure and Mechanical Behaviour of AA6082-T6/SiC/B4C Based Aluminium Hybrid Composites
Drying Technology, 2016
[283] COMPARATIVE STUDY ON INDIVIDUAL AND COMBINED EFFECTS OF ZIRCONIUM DIOXIDE AND GRAPHITE REINFORCEMENTS ON MECHANICAL PROPERTIES OF AL 6061 COMPOSITES
International Journal of Research in Engineering and Technology, 2016
[284] Wear Behaviour of Al-6061 alloy with different mesh size and reinforcement of SiC Metal Matrix Composite
International Journal of Recent Advances in Engineering & Technology, 2016
[285] Influence of single and dual particle reinforcements on the corrosion behavior of aluminum alloy based composites
2016
[286] Dry sliding wear behaviour of AA6082-T6/SiC/B4C hybrid metal matrix composites using response surface methodology
2016
[287] Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review
Procedia Technology, 2016
[288] DEVELOPMENT OF HYBRID COMPOSITE FOR AUTOMOBILE: A PROPOSED TECHNOLOGY
International Journal For Technological Research In Engineering , 2016
[289] Effect of Heat Treatment on the Wear Behaviour of Functionally Graded LM13/B 4 C Composite.
Tribology in Industry, 2016
[290] The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting
2016
[291] Parameters optimization, microstructure and microhardness of silicon carbide laser deposited on titanium alloy
2016
[292] Effect of Reinforcements in the enhancement of Mechanical Properties: An Experimental Study
IOSR Journal of Mechanical and Civil Engineering, 2016
[293] THE DEVELOPMENT AND CHARACTERIZATION OF GLASS FIBER-SILICA SAND NANOPARTICLES REINFORCED HYBRID COMPOSITES
2016
[294] SiCp/2024Al 复合材料与 SiC 陶瓷的软钎焊
焊接, 2016
[295] Hybrid materials of aluminium
Materials Today: Proceedings, 2016
[296] Mechanical Properties of Metal Al/SiC and AlCu/SiC Metal Matrix Composites (MMCs)
2016
[297] Experimental investigation of Mg/SiC composite fabrication via friction stir processing
The International Journal of Advanced Manufacturing Technology, 2016
[298] Wear performance of garnet aluminium composites at high contact pressure
AIP Conference Proceedings, 2016
[299] Development and Characterization of Aluminium LM6 based Matrix using 2% Sic & 2% Al2O3
2016
[300] Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing
Silicon, 2016
[301] Characteristic Study and Enhancement of Mechanical Properties of Al2024 Gray Cast Iron Powder Reinforced MMC by Heat Treatment
2016
[302] MECHANICAL AND TRIBOLOGICAL PROPERTIES OF FLY ASH REINFORCED ALUMINIUM 6061 COMPOSITE-A REVIEW
International Journal of Current Trends in Engineering & Research, 2016
[303] SOME ASPECTS CONCERNING A NEW POSSIBILITY OF Al-SiCP COMPOSITE PRODUCTION
U.P.B. Sci. Bull., 2016
[304] RECENT DEVELOPMENTS IN THE FABRICATION OF METAL MATRIX COMPOSITES BY STIR CASTING ROUTE–A REVIEW
2016
[305] Machining Studies on Hybrid AMCs used for Automotive Applications
2016
[306] Modification of microstructure and superficial properties of A356 and A356/10% SiCp by Selective Laser Surface Melting (SLSM)
Surface and Coatings Technology, 2016
[307] Wear Rate Investigation of Aluminium Based Silicon Carbide Metal Matrix Composite Embedded with Copper
International Journal for Innovative Research in Science & Technology, 2016
[308] Compared production behavior of borax and unborax premixed SiC reinforcement Al7Si-Mg-TiB alloys composites with semi-solid stir casting method
AIP Conference Proceedings, 2016
[309] INVESTIGATION ON MECHANICAL PROPERTIES OF AL 7075-AL2O3 METAL MATRIX COMPOSITE
International Journal of Mechanical Engineering and Technology, 2016
[310] Latest Research Development in Aluminum Matrix with Particulate Reinforcement Composites–A Review
2016
[311] Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites
Science and Engineering of Composite Materials, 2016
[312] Mechanical properties of Aluminum-Copper (p) composite metallic materials
Journal of Applied Research and Technology, 2016
[313] Role of SiC ceramic particles on the physical and mechanical properties of Al–4% Cu metal matrix composite fabricated via mechanical alloying
Journal of Composite Materials, 2016
[314] Modeling and Analysis on the Influence of Reinforcement Particle Size During EDM of Aluminum (Al/3.25 Cu/8.5 Si)/Fly Ash Composites
Journal of Advanced Manufacturing Systems, 2016
[315] Experimental investigations of Al-TiO2-Gr hybrid composites fabricated by stir casting
2016
[316] Manufacturing and Characterization of AA1100 Aluminum Alloy Metal Matrix Composites Reinforced by Silicon Carbide and Alumina Processed by Powder Metallurgy
Materials Science Forum, 2016
[317] Some Investigations on Effect of Cooling Rate on Al2O3 Reinforced Al-MMC Prepared by Vacuum Moulding
Journal of The Institution of Engineers (India): Series C, 2016
[318] Parametric Optimization of Wear Behavior of Friction Stir Welded Dissimilar Joints Aluminum Alloys (AA6061–AA6082)
IJSART, 2016
[319] Recent developments in the fabrication of metal matrix composites by stir casting route. A Review
2016
[320] Investigation of the Effect of Solution Hardening on Mechanical Properties of Al 7075–SiC Metal Matrix Composite
2016
[321] Mechanical Characterization of stir cast Al 356-Fly ash Composite
SKN International Journal of Scientific and Multidisciplinary Engineering Research, 2016
[322] Experimental Evaluation of Pouring Speed Effects on Mechanical and Machining Properties of Al6061-Cu-Sicp Metal Matrix Composites
2016
[323] Analysis of Enhanced Mechanical Properties of Al-MMCs Reinforced with SiC by using Stir Casting Method
International Journal of Technical Research (IJTR), 2016
[324] Effect of heat treatment variables on the abrasive wear behaviour of Al-6061 Alloy and Al 6061-SiCP composites using Taguchi Technique
2015
[325] Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with Hybrid Surface Nanocomposite.
2015
[326] Study on mechanical properties of Al 7075 based metal matrix composites
2015
[327] Primjena Al kompozita za jarbole
2015
[328] Characterisation of Aluminum-Silicon Carbide Composite using Stir Casting Technique
2015
[329] Dry sliding wear behaviour of aluminium Al–Si12Cu/TiB 2 metal matrix composite using response surface methodology
2015
[330] Mechanical properties of Aluminium–Graphite particulate composites
2015
[331] Experimental investigation and mechanical behavior of a 356.1 aluminium alloy matrix composite reinforced with silicon carbide
2015
[332] Mechanical Properties of Cast Aluminum Matrix Composites Reinforced with SiC and Al2O3 Particles
2015
[333] Morphological Study of Coated Silicon Carbide Particle with Multi Wall Carbon Nano Tubes
Applied Mechanics and Materials, 2015
[334] Development And Wear Analysis Of Flyash/Graphite Filled Copper Alloy Composite For Bearing Application...
2015
[335] Comparison of microstructure and wear resistance of A356–SiCp composites processed via compocasting and vibrating cooling slope
Transactions of Nonferrous Metals Society of China, 2015
[336] Development of Aluminium MMC with Hybrid Reinforcement-A Review
Materials Science Forum, 2015
[337] 6061 铝合金/岩粉复合材料的干滑动磨损行为
中国有色金属学报: 英文版, 2015
[338] Analysis on Mechanical Behaviour of AA 1050/SiC and AA 1050/Al2O3 Composites
2015
[339] Analysis of Mechanical Properties and Morphological Study of Coated Ceramics Using Multiwall Carbon Nanotubes with Aluminium Alloy
Applied Mechanics and Materials, 2015
[340] Influence of the Grit size of Silicon Carbide Particles on the Mechanical and Electrical Properties of Stir Casting Aluminum Matrix Composite Material
Silicon, 2015
[341] FABRICATION AND COMPARATIVE STUDY OF Zn-Ni METAL MATRIX COMPOSITE
International Journal of Science, Technology & Management , 2015
[342] Experimental Evaluation in the Properties of Various Tin Bronzes
International Journal of Latest Technology in Engineering, Management & Applied Science, 2015
[343] Design for a sustainability of a commercial product: a case study of a dynamic loudspeaker
2015
[344] STUDY ON THE EFFECTS OF SiC PARTICLES ON TENSILE PROPERTIES FOR Al/SiC COMPOSITES
International Journal of Science, Technology & Management, 2015
[345] Design and Fabrication of a Stir Casting Furnace Set-Up
Int. Journal of Engineering Research and Applications, 2015
[346] Mechanical Properties of Cast Aluminium Matrix Composites Reinfroced with SiC and Al2O3 Particles
2015
[347] Effects of Silicon Carbide (SIC) Nano Particulates Addition on Mechanical Properties of Aa2618 Alloy
2015
[348] MICROSTRUCTURAL ANALYSIS, MICROHARDNESS AND COMPRESSIVE BEHAVIOUR OF DUAL REINFORCED PARTICLES ADC-12 ALLOY COMPOSITE
2015
[349] Tribological behavior of AL-lm25 and SiC
micron, 2015
[350] Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics
Journal of Materials Research and Technology, 2015
[351] EXPERIMENTAL INVESTIGATION AND MECHANICAL BEHAVIOR OF A356. 1 ALUMINIUM ALLOY MATRIX COMPOSITE REINFORCED WITH SILICON CARBIDE
International Research Journal of Engineering and Technology, 2015
[352] Dry Sliding Wear Behaviour of Aluminium Al–Si12Cu/TiB2 Metal Matrix Composite Using Response Surface Methodology
Tribology Letters, 2015
[353] Development of AL SIC MMC and Parametric Analysis on EDM
2015
[354] Microstructural Finite Element Modeling and Simulation on Al–MgO Composites
International Journal of Computational Methods, 2015
[355] Effect of Magnesium Addition on Fracture Toughness in Aluminium Silicon Carbide Metal Matrix Composite Composite
International Journal of Research in Engineering & Advanced Technology, 2015
[356] Effect of Heat Treatment Variables on the Abrasive Wear Behaviour of Al-6061 Alloy and Al 6061-SiC P Composites Using Taguchi Technique
American Journal of Materials Science, 2015
[357] MMHCs in Light-Weight Car Design
Conference: International conference on Emerging & Futuristic trends in engineering & Technology, 2015
[358] Multi Response Optimization of Tungsten Inert Gas (TIG) Welding of Al6063/15% Sicp Metal Matrix Composites
Journal of Applied Mechanical Engineering, 2015
[359] Development and characterization of Al-Cu-Mg alloy/TiC metal matrix composites
Industrial Science Journal, 2015
[360] Identification of Optimum Composition and Mechanical Properties of Al-Ni Metal Matrix Composite
Journal of Minerals and Materials Characterization and Engineering, 2015
[361] Thermo-Mechanical and Fracture Characterization of Uncoated, Single and Multilayer (SiN/CrN) Coating on Granite Powder Filled Metal Alloy Composites
Silicon, 2015
[362] Softening Resistance, Dimensional Stability and Corrosion Behaviour of Alumina and Rice Husk Ash Reinforced Aluminium Matrix Composites Subjected to Thermal Cycling.
Tribology in Industry, 2015
[363] Investigations of Al–SiC AMC prepared by vacuum moulding assisted stir casting
Journal of Manufacturing Processes, 2015
[364] Review of experimental fracture toughness (KIC) of aluminium alloy and aluminium MMCs
International Journal of Fracture and Damage Mechanics, 2015
[365] ANALISA KETANGGUHAN KOMPOSIT ALUMINIUM BERPENGUAT SERBUK SiC
Jurnal Simetris, 2015
[366] MECHANICAL PROPERTIES OF Al-Si COMPOSITE MATERIALS OBTAINED BY STIR CASTING
ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, 2015
[367] Recent development and challenges in processing of ceramics reinforced Al matrix composite through stir casting process: A Review
International Journal of Engineering and Applied Sciences, 2015
[368] Wettability of Silicon Carbide Particles by the Aluminium Melts in Producing Al-SiC Composites
Advanced Materials Research, 2015
[369] Effect of Environmental Conditions for New Hybrid Aluminium Metal Matrix Composites Wear
2015
[370] 复合铸造与振动斜板冷却铸造 SiC_p 增强 A356 复合材料显微组织与耐磨性的比较
中国有色金属学报: 英文版, 2015
[371] CFD Simulation of Centrifugal Casting of Al-SiC FGM for the Application of Brake Rotor Disc
2015
[372] Mechanical Properties of Al-Si-SiCp Composites
International Journal of Scientific & Engineering Research, 2015
[373] Roughness Analysis of the Holes Drilled on Al/Sic Metal Matrix Composites using Atomic Force Microscope.
Applied Mechanics & Materials, 2015
[374] Effect on mechanical properties of aluminium alloy composites on adding ash as reinforcement material
Journal of Metals, Materials and Minerals, 2015
[375] STUDIES ON MECHANICAL PROPERTIES AND TRIBOLOGICAL BEHAVIOUR OF LM25/SiC/Al2O3 COMPOSITES
Journal of Engineering Science and Technology, 2015
[376] Dry sliding wear characterization of Al 6061/rock dust composite
Transactions of Nonferrous Metals Society of China, 2015
[377] Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with {{\ rm Al} _ {2}{\ rm O} _ {3}/0.5\,{\ rm Gr}} Hybrid Surface Nanocomposite
Arabian Journal for Science and Engineering, 2015
[378] Microstructure and Properties of Spark Plasma Sintered Aluminum Containing 1 wt.% SiC Nanoparticles
Metals, 2015
[379] Fracture toughness evaluation technique for metal matrix composites using ball indentation method
International Journal of Computer Aided Engineering and Technology, 2015
[380] ADHESIVE WEAR BEHAVIOUR OF ALUMINIUM HYBRID METAL MATRIX COMPOSITES USING GENETIC ALGORITHM
Journal of Engineering Science and Technology, 2015
[381] Investigation of Vibration properties of Aluminium, Silicon carbide, Mica a Hybrid Metal Matrix Composite
2015
[382] Development and Analysis of Aluminium Hybrid Metal Matrix Composites
Int. J. Adv. Eng, 2015
[383] Microstructure and Tribological Properties of Aluminum Matrix Composite
Key Engineering Materials, 2015
[384] Investigation of Wear Loss in Aluminium Silicon Carbide Mica Hybrid Metal Matrix Composite
2015
[385] Effect of Machining Parameters on the Surface Roughness while Turning Particulate Composites
Procedia Engineering, 2014
[386] Aluminium alloy-rice husk ash composites production and analysis
Leonardo Electronic Journal of Practices and Technologies, 2014
[387] EFFECT OF SILICON CARBIDE PERCENTAGE ON FRACTURE TOUGHNESS OF ALUMINIUM SILIOCN CARBIDE METAL MATRIX COMPOSITES
2014
[388] Fabrication and heat treatment of ceramic-reinforced aluminium matrix composites-a review
International Journal of Mechanical and Materials Engineering, 2014
[389] Study of the Effect of Varying Pouring Rate on Mechanical Properties of Al-Cu and SiCp Reinforced Metal Matrix Composites (MMC)
Journal of Energy Technologies and Policy, 2014
[390] Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC P Metal Matrix Composite
Journal of Minerals and Materials Characterization and Engineering, 2014
[391] Microstructural analysis and tribological behavior of aluminum alloy reinforced with hybrid alumina/nanographite particles
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2014
[392] Studies on mechanical and tribological behaviour of particulate Aluminium metal matrix composites
2014
[393] Synthesis of Al-Sic Composite Prepared By Mechanical Alloying
C Singh, J Singh - iosrjournals.org, 2014
[394] FABRICATION AND CHARACTERISATION OF Al-BASED HYBRID COMPOSITE REINFORCED WITH SiC, Al2O3 AND C PARTICLES BY SQUEEZE CASTING
G Singh, CS Kalra - confabjournals.com, 2014
[395] FABRICATION AND MECHANICAL PROPERTIES OF STIR CAST Al-Si12Cu/B4C COMPOSITES
T Raviteja, N Radhika, R Raghu - ijret.org, 2014
[396] A Fatigue Model for Discontinuous Particulate-Reinforced Aluminum Alloy Composite: Influence of Microstructure
Journal of materials engineering and performance, 2014
[397] Mechanical Behavior of Aluminum (AlSi10Mg)-RHA Composite
International Journal of Engineering and Technology, 2014
[398] Wear Characterization of Aluminium/Sic/Al2O3 Hybrid Metal Matrix Composite Using Taguchi Technique
International Journal of Innovative Research and Development, 2014
[399] Development of Aluminium based Titanium Carbide Particulate Metal Matrix Composite
2014
[400] Influence of fly ash particles on tensile and impact behaviour of aluminium (Al/3Cu/8.5 Si) metal matrix composites
Science and Engineering of Composite Materials, 2014
[401] PROCESSING AND CHARACTERIZATION OF SiCp REINFORCED ZINC-ALUMINUM METAL MATRIX COMPOSITES AS BEARING MATERIALS
M Khan Hasib Kaisar, N Haque, KM Shorowordi - buet.ac.bd, 2014
[402] Machining Behavior of Al6061-Fly Ash Composites
Procedia Materials Science, 2014
[403] Tribological and mechanical behavior of particulate aluminum matrix composites
Journal of Reinforced Plastics and Composites, 2014
[404] Study of Mechanical Properties & Residual Stresses on Post Wear Samples of A356-SiC Metal Matrix Composites
Procedia Materials Science, 2014
[405] SOME THEORETICAL AND PRACTICAL ASPECTS IN PRODUCING CAST ALUMINIUM-SILICON CARBIDE PARTICLES COMPOSITES
IJ ODAGIU, F ?TEF?NESCU, G NEAGU - scientificbulletin.upb.ro, 2014
[406] A Comparative Study on the Properties of Al-7% Si-Rice Husk Ash and Al-7% Si-Bagasse Ash Composites Produced by Stir Casting
AM Usman, A Raji, MA Hassan, NH Waziri - theijes.com, 2014
[407] In-situ synthesis of SiC particles by the structural evolution of TiC x in Al–Si melt
Journal of Alloys and Compounds, 2014
[408] Microstructural Studies of Aluminium 7075-Silicon Carbide-Alumina Metal Matrix Composite
Advanced Materials Research, 2014
[409] A Comparative Analysis of Transimpedance Amplifier in Giga-bit Optical Communication
Research Journal of Engineering Sciences, 2014
[410] Mechanical and Microstructure Characterization of A356 (Al/SiC) MMC
Advanced Materials Research, 2014
[411] A Study on Mechanical Properties of Silicon Carbide, E-Glass and Red Mud Reinforced Aluminium (LM25) Composite.
2014
[412] Mechanical properties of Magnesium Inoculated 6063 Aluminium Alloy
MA Bodude, EF Ochulor, WA Ayoola, SO Adeosun - 2013, 2014
[413] A STUDY ON MECHANICAL PROPERTIES OF REINFORCED AL6061 USING REINFORCING MATERIALS OF Al2O3 AND SiC COMPOSITE
Journal of Advanced Manufacturing Technology (JAMT), 2014
[414] Evaluation of mechanical characteristics for Aluminum-copper Metal matrix composite
2014
[415] Microstructural analysis, micro hardness and tensile strength of silicon carbide and zirconium silicate dual reinforced particle ADC-12 alloy composite
International Journal of Applied Science and Engineering Research, 2014
[416] Microstructural and Medium Silica Quartz Slurry Erosion Wear Behavior of Silicon Carbide and Zircon Sand Dual Reinforced Particle (DRP) LM-13 Alloy Composites
International Journal of Engineering Innovations and Research, 2014
[417] Study on the Effect of the Roof Opening on the Temperature Underneath
International Journal of Applied Engineering Research, 2014
[418] Study of Machinability Characteristics on E-Glass Fiber and Silicon Carbide Reinforced Aluminum 2618 Hybrid Composite
Journal of Basic and Applied Engineering Research, 2014
[419] Microstructure and erosion wear of LM-13 alloy composites with dual reinforcement by silicon carbide and zircon sand in fine silica quartz slurry
Usak University Journal of Material Sciences, 2014
[420] EFFECT OF POURING TEMPERATURE AND STIRRING SPEED ON MECHANICAL, MICROSTRUCTURE AND MACHINING PROPERTIES OF AL6061-CU REINFORCED SiCP METAL MATRIX COMPOSITES
International Journal of Research in Engineering and Technology , 2014
[421] MICROSTRUCTURAL ANALYSIS, MICRO HARDNESS AND TENSILE STRENGTH OF SILICON CARBIDE AND ZIRCONIUM SILICATE DUAL REINFORCED PARTICLE LM- 13 ALLOY COMPOSITE
JOURNAL OF INTERNATIONAL ACADEMIC RESEARCH FOR MULTIDISCIPLINARY, 2014
[422] FARKLI MATRİS KOMPOZİSYONLARI VE TAKVİYE ORANLARI İÇİN ALÜMİNYUM ESASLI KOMPOZİTLERİN TOZ METALURJİSİ YÖNTEMİYLE ÜRETİMİ VE KARAKTERİZASYONU
Celal Bayar University Journal of Science, 2014
[423] 中间层对高体积分数 SiC_p/Al 复合材料真空钎焊的影响
焊接学报, 2014
[424] Physical, mechanical, and tribological attributes of stir-cast AZ91/SiCp composite
Acta Metallurgica Sinica (English Letters), 2014
[425] Effect of silicon carbide percentage on fracture toughness of aluminum silicon carbide metal matrix composites
2014
[426] Production and characterization of aluminum based composites by powder metallurgy method for different matrix composition and amounth of the reinforcement
Celal Bayar Üniversitesi Fen Bilimleri Dergisi, 2014
[427] Statistical Modeling and Analysing of Wear Behaviour of LM25 Al/B4C/Gr Hybrid Composites
2014
[428] Study of Hardness of Al-SiC Composites Using Powder Metallurgy
2014
[429] Mechanical and machining properties analysis of Al6061-Cu-reinforced SiCP metal matrix composite
2014
[430] Investigation of Tool Wear during Friction Stir Welding of Metal Matrix Composites
2014
[431] EXPERIMENTAL ANALYSIS OF THERMOPHYSICAL AND MECHANICAL CHARACTERISTICS OF AlSiCp METAL MATRIX COMPOSITE
2014
[432] A Novel Composite with Nacreous Designed to Resist Wear and Corrosion
2014
[433] Study on mechanical properties and wear behavior of LM6 aluminum/nano Al2O3 composites
Applied Mechanics and Materials, 2014
[434] EFFECT OF POURING TEMPERATURE AND STIRRING SPEED ON MECHANICAL, MICROSTRUCTURE AND MACHINING PROPERTIES OF AL6061-CU …
2014
[435] The Effect of Milling Time on Aluminium Silicon Carbide Composite
2014
[436] Physical, Mechanical, and Tribological Attributes of Stir-Cast AZ91/SiC p Composite
2014
[437] Microstructural and medium silica quartz slurry erosion wear behavior of silicon carbide and zircon sand dual reinforced particle (DRP) LM-13 alloy …
2014
[438] Production and characterization of aluminum based composites by powder metallurgy method for different matrix composition and amounth of the …
2014
[439] Development of Al-Sic MMC and Experimental investigation by Electro discharge machining-A Review
International Journal for Scientific Research & Development, 2014
[440] FARKLI MATRİS KOMPOZİSYONLARI VE TAKVİYE ORANLARI İÇİN ALÜMİNYUM ESASLI KOMPOZİTLERİN TOZ METALURJİSİ YÖNTEMİYLE ÜRETİMİ VE …
Celal Bayar University Journal of Science, 2014
[441] e-Governance in India
2013
[442] Frictional and wear characteristics of stir-cast hybrid composite aluminium Al6061reinforced with SiC particulates
2013
[443] Effect of process parameters on microstructure and properties of spark plasma sintered Al-SiC nanocomposites
ProQuest Dissertations Publishing, 2013
[444] بررسی تاثیر کاربید تیتانیوم بر‌ریز‌ساختار و خواص نهایی کامپوزیت‌های آلومینیوم-کاربید سیلیسیم تهیه شده به روش‌های حرارت‌دهی معمولی و مایکروویو‎
2013
[445] The effect of sintering temperature on mechanical properties of Al/SiC composites
2013
[446] Mechanical behaviour of alumina reinforced AA 6063 metal matrix composites developed by two step-stir casting process
Acta Technica Corviniensis-bulletin of engineering, 2013
[447] Effect of process parameters on corrosion rate of friction stir welded aluminium SiC–Gr hybrid composites
Corrosion Engineering, Science and Technology, 2013
[448] Microstructure Analysis of Aluminium metal matrix alloy with Silicon Carbide
2013
[449] Development of Al/Sic5%, Al/Sic10%, Al/Sic15%, Metal Matrix Composite And Its Comparision With Alumi-nium Alloy – LM25 On Tribological Parameters
International Journal of Emerging Technology and Advanced Engineering, 2013
[450] Process Capability Analysis of MMC Prepared by Combining FDM, Vacuum Moulding and Stir Casting
Asian Journal of Engineering and Applied Technology, 2013
[451] Investigation of Dry Sliding Wear Behaviour of B4C Particulate Reinforced Mg Matrix Composites
Acta Physica Polonica A, 2013
[452] Enhancing the Properties of Al–WC Nanocomposites Using Liquid Metallurgy
Experimental Techniques, 2013
[453] Investigation of the effect of aging variables on the impact behaviour of Al 6061 alloy and its composites
Research & Technology in the Coming Decades (CRT 2013), National Conference on Challenges in, 2013
[454] Experimental and finite element analysis of mechanical and fracture behavior of SiC particulate filled A356 alloy composites: Part I
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 2013
[455] Experimental Investigation of Effect of Gear Milling Parameters of Al-B4C Composite Gears on Surface Roughness
Advanced Materials Research, 2013
[456] Mechanical Behaviour of Cold Deformed and Solution Heat-treated Alumina Reinforced AA 6063 Metal Matrix Composites
KK Alaneme - criticalthinking.uwi.tt, 2013
[457] Production of Aluminium AC8H/Al2O3p Coated Metal Matrix Composites by Stir Casting Route
KMUTNB: International Journal of Applied Science and Technology, 2013
[458] Research Review On Corrosion Behaviour Of Metal Matrix Composites
2013
[459] Study of Dry Sliding Wear Behavior of Aluminium/SiC/Al2O3/Graphite Hybrid Metal Matrix Composite Using Taguchi Technique
International Journal of Scientific and Research Publications, 2013
[460] Machinability of aluminum metal matrix composite reinforced with in-situ ceramic composite developed from mines waste colliery shale
Materials and Manufacturing Processes, 2013
[461] Sliding wear of LM25 aluminium alloy with 7.5% SiC+ 2.5% TiO2 and 2.5% SiC+ 7.5% TiO2 hybrid composites
Journal of Composite Materials, 2013
[462] Tribological Behavior of Novel Hybrid Composite Materials Using Taguchi Technique
Journal of Tribology, 2013
[463] The key attributes of synthesizing ceramic particulate reinforced al-based matrix composites through stir casting process: a review
Materials and Manufacturing Processes, 2013
[464] Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material
Metallurgical and Materials Transactions B, 2013
[465] IN SITU SEM MICROBENDING TESTS OF ALUMINIUM ALLOYS AND ALUMINIUM MATRIX COMPOSITES
LM Laorden, P Rodrigo, B Torres, J Rams, 2013
[466] Nonlinear elastic properties of Al-alloy/Nanodiamond composite
Proceedings of Meetings on Acoustics. Acoustical Society of America, 2013
[467] Study of Particle Distribution in Al-SiC Particulate Composite by Random Motion of Mould
Key Engineering Materials, 2013
[468] Fractographic aspects of al-alloy-sicp metal matrix composite subjected to static, dynamic and cyclic mechanical loading
ECF19, 2013
[469] OPTIMIZATION OF PROCESS PARAMETER FOR STIR CASTED ALUMINIUM METAL MATRIX COMPOSITE USING TAGUCHI METHOD
L Singh, B Ram, A Singh - ijret.org, 2013
[470] SiCAl 电子封装材料制备工艺研究进展
兵器材料科学与工程, 2013
[471] The Effect of Sintering Duration on Mechanical Properties of Al/SiC Composites
International Review of Mechanical Engineering (IREME), 2013
[472] Caracterização fratográfica de compósito de matriz metálica submetido a ensaios de impacto, flexão e fadiga
Thesis, 2013
[473] Parametric Optimization of Wear Test on Al/SiC–Metal Matrix Composite Using Taguchi Method
2013
[474] Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite
Journal of Minerals and Materials Characterization and Engineering, 2013
[475] Thermal, Hardness and Microstructural Characterization of Al-Si-SiCp Composites
Journal of Minerals and Materials Characterization and Engineering, 2012
[476] Dry Sliding Wear Behaviour of Aluminium/Be3Al2 (SiO3) 6 Composite Using Taguchi Method
Journal of Minerals and Materials Characterization and Engineering, 2012
[477] Fabrication and Characterizations of Mechanical Properties of Al-4.5% Cu/10TiC Composite by In-Situ Method
Journal of Minerals and Materials Characterization and Engineering, 2012
[478] Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compocasting method and study of its properties
Journal of Alloys and Compounds, 2012
[479] The Optimization of Sliding Wear Behaviour of Aluminium/Be3Al2 (SiO3) 6 Composite using Taguchi Approach
Optimization, 2012
[480] Experimental Analysis in Machining Aluminium Matrix Composites
2012
[481] An Experimental investigation of Mechanical behavior of Aluminum by adding SiC and Alumina
International Journal on Emerging Technologies, 2012
[482] Corrosion behaviour of Al (6063) alloy (as-cast and age hardened) in H2SO4 solution
Journal of Materials Science Research, 2012
[483] Hot rolling behaviour of stir-cast Al 6061 and Al 6082 alloys–SiC fine particulates reinforced composites
Journal of Materials Processing Technology, 2012
[484] Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063)–silicon carbide particulate composites
Scientia Iranica, 2012
[485] Microstructural and wear behavior of dual reinforced particle (DRP) aluminum alloy composite
Journal of Materials Science, 2012
[486] Thermo-mechanical and crack position on stress intensity factor in particle-reinforced Zinc–aluminium alloy composites
Computational Materials Science, 2012
[487] Effect of particle size on mechanical properties and tribological behaviour of aluminium/fly ash composites
Science and Engineering of Composite Materials, 2012
[488] Aluminum-Silicon Carbide Composites for Enhanced Physio-Mechanical Properties
Advanced Materials Research, 2012
[489] Evaluation of Mechanical Properties of Aluminum Alloy 6061-Glass Particulates reinforced Metal Matrix Composites
MK Yc, U Shankar - academia.edu, 2012
[490] Dry sliding wear behaviour of aluminium/alumina/graphite hybrid metal matrix composites
Industrial Lubrication and Tribology, 2012
[491] Observations on the Electrical Properties of Al-Sic Composite
2012
[492] Fabrication and Characterization of Aluminium Matrix Composites by High Velocity Oxy-Fuel Thermal Spraying
Advanced Materials Research, 2012
[493] Mechanical Behavior of A356/Albite Composite Material
2012
[494] Entangled dilaton dyons
2012
[495] Production and age-hardening behavior of borax premixed SiC reinforced Al-Mg-Si alloy composites developed by double stir-casting technique
2012
[496] DEVELOPMENT OF ELECTROMAGNETIC STIR CASTING PROCESS FOR METAL MATRIX COMPOSITE (MMC)
2012
[497] Измерение упругих модулей дисперсно-наполненных композиционных материалов лазерным оптико-акустическим методом
2011
[498] An Investigation on the Influence of SiC Volume Percent and Heat-treatment on the Corrosion Behaviour of Al-6063/SiCp Composites in HCL - H2SO4 Environment
NSE Technical Transactions, 2011