Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach"
written by S. Basavarajappa, K.V. Arun, J. Paulo Davim,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2009
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Influence of Arecanut NanoFiller on Mechanical and Tribological Properties of Coir Fiber Reinforced Epoxy Based Polymer Composite
[2] Effect of castor oil on mechanical and thermal behaviours of hybrid fibres reinforced epoxy based polymer composites
2021
[3] Optimization of high speed machining cutting parameters for end milling of AlSi7Cu4 using Taguchi based technique of order preference similarity to the ideal solution
2021
[4] Simulation of wear process parameters of hybrid aluminium micro composite using ANOVA
2021
[5] Thermal and wear properties of sansevieria trifasciata green fiber–carbon fiber polymer hybrid composite
2021
[6] Parametric Optimization and Prediction of Abrasion Wear Behavior of Marble-Particle-Filled Glass–Epoxy Composites Using Taguchi Design Integrated with Neural …
2021
[7] Tribological Properties of Fly Ash Blended Polymer Composites
2021
[8] Influence of filler incorporation on the mechanical and wear behaviour of synthetic fiber reinforced polymer matrix composites-A review
2020
[9] Tribo Performance Studies on Redmud Filled Pineapple Fiber Composite
2020
[10] In uence of areca nut nanofiller on mechanical and tribological properties of coir fibre reinforced epoxy based polymer composite
2020
[11] Processing and wear response study of glass‐polyester composites with waste marble dust as particulate filler
2020
[12] Wear characteristics of glass‐polyester‐based hybrid composites: A parametric analysis using response surface method and fuzzy logic
2020
[13] Effect of Molybdenum Disulfide Nano-particles on Dry Sliding Behavior of Carbon Fiber Reinforced Epoxy.
2020
[14] Dry sliding wear characterization of SGM/boron carbide hybrid polymer matrix composite
2020
[15] Tribological properties of carbon-reinforced epoxy composites-A review
2020
[16] Evaluation of Mechanical and Wear Performances of Natural Fiber Reinforced Epoxy Composites
2020
[17] Impact Strength, Flexural Modulus and Wear Rate of PMMA Composites Reinforced by Eggshell Powders
2020
[18] DEVELOPING AND OPTIMIZING A PROTECTIVE SKATEBOARD SHOE PATCH DESIGNED TO EXTEND THE LIFE OF THE SHOE
UNDERGRADUATE RESEARCH JOURNAL, 2019
[19] Application of Artificial Neural Network: A Case Study of Biomedical Alloy
2019
[20] Wear and Frictional Behavior of Composite Laminates Filled with Agro-Based Waste Materials
2019
[21] Dry sliding wear behavior of GFRP with liquid silicon rubber and reinforced with fine silica powder by Taguchi approach
2019
[22] The study of wear behaviour of glass/epoxy composites reinforced with titanium dioxide and graphite filler materials
2019
[23] Study on Wear Behaviour on Hardfacing Alloy
2019
[24] Friction characteristics of protein-glucose-thermoset composites
2019
[25] Study of Tribo-Performance and Application of Polymer Composite
2019
[26] Manufacturing and Evaluation of Corrosion Resistance of Nickel-Added Co–30Cr–4Mo Metal Alloy for Orthopaedic Biomaterials
2019
[27] A Study of Macrostructure and Wear Behavior of AL7075-B4C MMC Using DoE Method
2019
[28] Optimization of Dry sliding Wear Performance of pongamia oil cake filled Basalt Epoxy Composites by Taguchi Approach
2019
[29] Manufacturing and Evaluation of Corrosion Resistance of Nickel-Added
2019
[30] Synergistic effect of nano graphene on the mechanical behaviour of glass-epoxy polymer composites
2019
[31] Sliding Wear Experimental Investigation and Prediction Using Response Surface Method: Fillers Filled Fiber Reinforced Composites
2019
[32] Wear analysis of waste marble dust-filled polymer composites with an integrated approach based on design of experiments and neural computation
2019
[33] Study of Friction and Wear Behaviour of Epoxy/Nano SiO2 based Polymer Matrix Composites-A Review
2019
[34] DRILLING OF GFRP COMPOSITES WITH RUBBER AS A INTERMEDIATE LAYER
2019
[35] Wear Behavior Performance of Polymeric Matrix Composites Using Taguchi Experiments
2019
[36] Experimental investigation of dry sliding wear behaviour of jute/epoxy and jute/glass/epoxy hybrids using Taguchi approach
2018
[37] Tribological performance evaluation of polytetrafluoroethylene composites under dry sliding and aqueous environments using taguchi approach and grey relational …
2018
[38] APPLICATION OF ARTIFICAIL NEURAL NETWORK ON ABRASIVE WEAR BEHAVIOUR OF CARBON FIBER REINFORCED EPOXY COMPOSITES WITH AND WITHOUT FILLER
INTERNATIONAL JOURNAL OF RESEARCH INAERONAUTICAL AND MECHANICAL ENGINEERING, 2018
[39] INFLUENCE OF VACUUM APPLICATION ON THE TRIBOLOGICAL PROPERTIES OF PORCELAIN WASTE REINFORCED EPOXY COMPOSITES
2018
[40] Multi-Response Optimization of Al2024/red mud MMC using Hybrid Taguchi-GRA-Entropy Optimization Technique
Materials Today: Proceedings, 2018
[41] Taguchi Technique for Dry Sliding Wear Behavior of PEEK Composite Materials
Materials Today: Proceedings, 2018
[42] EFFECT OF AGEING ON EROSIVE WEAR BEHAVIOUR OF CARBON FIBER REINFORCED EPOXY COMPOSITES
INTERNATIONAL JOURNAL OF RESEARCH INAERONAUTICAL AND MECHANICAL ENGINEERING, 2018
[43] Tribological and Physical Characterization of Citrus-Limetta Peel Reinforced Polyester Composites
International Journal of Applied Engineering Research [IJAER], 2018
[44] Marvelous abilities for polyhedral oligomeric silsesquioxane to improve tribological properties of polyamide-imide/polytetrafluoroethylene coatings
Journal of Materials Science, 2018
[45] Porselen Atık Takviyeli Epoksi Kompozitlerinin Tribolojik Özelliklerine Vakum Uygulamasının Etkisi
Selçuk Üniversitesi Mühendislik, Bilim Ve Teknoloji Dergisi, 2018
[46] The effect of fiber orientation on wear behavior of glass fiber-epoxy filled with particles
Industrial Lubrication and Tribology, 2018
[47] 1School of Engineering and Technology Navrachana University, Vadodara, India
2018
[48] Dry Sliding Wear Behavior of Pultruded Glass Fiber Epoxy Composites: Effect of Temperature
Materials Today: Proceedings, 2018
[49] E-Cam Elyaf Takviyeli Epoksi Matrisli Kompozit Malzemelerin Elyaf Oranındaki Artış İle Mekanik Özelliklerindeki Değişimlerin İncelenmesi
El-Cezeri Journal of Science and Engineering, 2018
[50] FRICTION AND WEAR BEHAVIOUR OF POLYMER MATRIX COMPOSITES–A REVIEW
International Research Journal of Engineering and Technology, 2017
[51] Experimental investigation and prediction of wear behavior of cotton fiber polyester composites
Friction, 2017
[52] Effect Of TiO2 On Polymer Fiber/Foam Reinforced Nano Composites
2017
[53] Tribology on Epoxy/Glass Fiber/Carbon Composites-Taguchi Approach
Journal of Computational and Theoretical Nanoscience, 2017
[54] INVESTIGATING THE MECHANICAL PROPERTIES OF POLYESTER-NATURAL FIBER COMPOSITE
International Research Journal of Engineering and Technology, 2017
[55] Optimization on Abrasive Wear Performance of Pultruded Kenaf-Reinforced Polymer Composite Using Taguchi Method
Key Engineering Materials, 2017
[56] Abrasive Wear Performance of Aluminium Modified Epoxy-Glass Fibre Composites
2017
[57] Studies on the static and Dynamics Behaviors of Surface Treated Luffa Cylindrica Polyester Composites
2016
[58] An Experimental Investigation and Improvement of Insulated Rail Joints (IRJs) End Post Performance.
2016
[59] Studies on Tribological Properties of SiC and Fly Ash Reinforced Glass Fiber Epoxy Composites by Taguchi Method
2016
[60] Mechanical Characterization of Carbon Fiber Reinforced Epoxy Composite with & without MoS2 Filler
2016
[61] Optimization of Machining Parameters on Al–SI (LM 6) Alloy Using Taguchi Method and Utility Concept
2016
[62] Wear Behavior of TiO2 and WC Reinforced Epoxy Resin Composites
International Research Journal of Engineering and Technology, 2016
[63] Analysis of wear behavior of thermoplastic Bio-composite
2016
[64] Evaluation of Mechanical and Tribological Behavior of Al–4% Cu–x% SiC Composites Prepared Through Powder Metallurgy Technique
Transactions of the Indian Institute of Metals, 2016
[65] STUDIES ON DRY SLIDING WEAR BEHAVIOR OF ALUMINIUM METAL MATRIX COMPOSITE PREPARED FROM DISCARDED WASTE PARTICLES
2016
[66] Dry Sliding Wear Behavior of Epoxy Based Composites Filled With WS2 and B4C
International Journal of Material Sciences and Technology, 2016
[67] Dry Sliding Wear of Coconut Shell Powder Filled Glass Fiber Reinforced Polymer Composites
International Research Journal of Engineering and Technology, 2016
[68] International Journal of Informative & Futuristic Research ISSN: 2347-1697
2016
[69] Investigation of Tribological Properties of Plasma Sprayed Ceramic Coating AISI-1020 Stainless Steel
2016
[70] Tribological behavior of Al2O3 and B4C particle-reinforced copper matrix investigated by the Taguchi method
2016
[71] Composites as TRIBO materials in engineering systems: significance and applications
2015
[72] Abrasive Wear Performance of Aluminium Modified Epoxy-Glass Fiber Composites
Journal of Molecular and Engineering Materials, 2015
[73] Analysis of abrasive wear behavior of PTFE composite using Taguchi's technique
Cogent Engineering, 2015
[74] Optimal Maching Parameter Using Taguchi Method On Al-Si (Lm 6)
International Refereed Journal of Engineering and Science (IRJES), 2015
[75] Influence of cutting parameters during drilling of filled glass fabric-reinforced epoxy composites
Science and Engineering of Composite Materials, 2015
[76] Mechanical properties and sliding wear behavior of jatropha seed cake waste/epoxy composites
Journal of Material Cycles and Waste Management, 2015
[77] A Taguchi with principal component analysis based approach for the assessment of the cutting parameters during drilling of GFRP composite
Electrical, Electronics, Signals, Communication and Optimization (EESCO), 2015 International Conference on, 2015
[78] Tribology of fiber reinforced polymer matrix composites—A review
Journal of Reinforced Plastics and Composites, 2015
[79] Prediction and optimization of tribological behavior of nylon composites using Taguchi analysis method
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2015
[80] Preparation of polyimide-graphite composite and evaluation of its friction behavior at elevated temperatures
Science and Engineering of Composite Materials, 2015
[81] Physical and Mechanical Properties of Polymer Composites with High Content of Wastes Including Boron
Materials Research, 2015
[82] Wear Characteristics of Polymer-Based Composites
Mechanics of Composite Materials, 2015
[83] MECHANICAL AND TRIBOLOGICAL CHARATERISTICS OF CENOSPHERE PARTICLATES FILLED E-GLASS FIBER REIFORCED VINYLESTER COMPOSITES USING TAGUCHI METHOD AND ANN
AGU International Journal of Engineering & Technology, 2015
[84] Notice of Retraction A Taguchi with principal component analysis based approach for the assessment of the cutting parameters during drilling of GFRP composite
2015
[85] An optimization approach to the dry sliding wear behavior of particulate filled glass fiber reinforced hybrid composites
2015
[86] Sliding Wear Characteristics of Fiber Reinforced Fillers Filled Polymer Based Composites: A Review
2015
[87] Polimer esaslı fiber takviyeli kompozit malzemelerin tribolojik ve mekanik özelliklerinin incelenmesi
2015
[88] Sliding wear characteristics of fiber reinforced fillers filled polymer-based composites: a review
2015
[89] Influence of bolt configuration and TiO 2/ZnS fillers content on the strength of composites fasteners
Materials & Design, 2014
[90] Studies on dry sliding wear behaviour of functionally graded graphite particle-filled glass-epoxy composites
Composite Interfaces, 2014
[91] Estudio del desempe?o tribológico de un material compuesto de matriz fenólica cargado con partículas de caucho estireno butadieno SBR.
2014
[92] Optimisation of Dry Sliding Wear Process Parameters for Aluminium Hybrid Metal Matrix Composites.
Tribology in Industry, 2014
[93] Ultrastructure and wear patterns of the ventral epidermis of four snake species (Squamata, Serpentes)
Zoology, 2014
[94] Comparative study of wear performance of particulate and fiber-reinforced nano-ZnO/ultra-high molecular weight polyethylene hybrid composites using response surface methodology
Materials & Design, 2014
[95] Comparative study of wear performance of particulate and fiber-reinforced nano-ZnO/ultra-high molecular weight polyethylene hybrid composites using response …
Materials & Design (1980-2015), 2014
[96] Application of Taguchi Approache to Study the Effect of Filler Type on Tribological Behavior of Polymer Composite Under Dry Conditions
2014
[97] PHYSICAL, MECHANICAL AND ABRASIVE WEAR BEHAVIOUR OF JUTE FIBER REINFORCED POLYMER COMPOSITES
Thesis, 2014
[98] Tribology Studies and Microscopic Analysis of Polyester-Based Red Mud Polymer Composites
Journal of Advanced Microscopy Research, 2014
[99] Tribological Investigation of Brass by Centrifugal Casting Process
2014
[100] OPTIMIZATION OF PROCESS PARAMETERS OF PLASTIC INJECTION MOLDING FOR POLYPROPYLENE TO ENHANCE PRODUCTIVITY AND REDUCE TIME FOR DEVELOPMENT
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY, 2014
[101] Drilling Of Tio2 and Zns Filled Gfrp Composites: A Taguchi Approach
International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), 2014
[102] Dry sliding wear behaviour of glass fibre reinforced epoxy composites filled with natural fillers
Reason-A Technical Journal, 2013
[103] Effect of TiO2 and ZnS Fillers on the Bending Characteristics of GFRP Composites under Varied Flaw Configurations
International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), 2013
[104] Tribological Characterisation and Morphological Study of Epoxy Composites filled with WS under Dry Sliding‖
2013
[105] Influence of service temperature and secondary fillers on the impact toughness of glass-epoxy composites
International Journal of Plastics Technology, 2013
[106] Tribological Characterisation and Morphological Study of Epoxy Composites filled with WS2 under Dry Sliding
International Journal, 2013
[107] Strengthening and Toughening of Unsaturated Polyester by Using Some Additives in Gear Application
Applied Mechanics and Materials, 2013
[108] Mechanical Property of Glass Fiber Reinforcement Epoxy Composites
International Journal, 2013
[109] Role of Silicon Dioxide Filler on Mechanical and Dry Sliding Wear Behaviour of Glass-Epoxy Composites
Advances in Tribology, 2013
[110] Tribological studies on effect of mixture of fillers in polystyrene matrix composites
Journal of Thermoplastic Composite Materials, 2013
[111] Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites
Materials & Design, 2013
[112] Investigation of surface properties and mechanical and tribological behaviors of polyimide based composite coatings
Surface and Coatings Technology, 2013
[113] Manuscript Info Abstract
2013
[114] INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET)
2013
[115] Tribological Characterization and Morphological Study of Epoxy Composites filled with WS2 under Dry Sliding
2013
[116] Study of mechanical and Wear behavior of carbon fiber reinforced epoxy resin composites with alumina filler additions
2013
[117] The Wear & Friction Characteristics of Glass-Epoxy Composites for Coal Handling Parts in Thermal Power Plants
2013
[118] The Effect of Silicon Carbide Addition into Fibreglass Reinforced Composites
2012
[119] The Effect ofSilicon CarbideAddition into Fibreglass Reinforced Composites
International Journal of Composite Materials, 2012
[120] Effect of micro size cenosphere particles reinforcement on tribological characteristics of vinylester composites under dry sliding conditions
Journal of Minerals and Materials Characterization and Engineering, 2012
[121] TM METODU İLE ÜRETİLEN Al2O3-TAKVİYELİ ALUMINYUM ESASLI KOMPOZİTLERİN AŞINMA DAVRANIŞI İÇİN İSTATİSTİKSEL MODEL OLUŞTURULMASI
2012
[122] Grey-based Taguchi approach for wear assessment of SiC filled carbon–epoxy composites
Materials & Design, 2012
[123] Nanoreinforced bacterial cellulose–montmorillonite composites for biomedical applications
Carbohydrate polymers, 2012
[124] Epidermis architecture and material properties of the skin of four snake species
Journal of The Royal Society Interface, 2012
[125] FRICTION AND DRY SLIDING WEAR BEHAVIOR OF RED MUD FILLED BANANA FIBRE REINFORCED UNSATURATED POLYESTER COMPOSITES USING TAGUCHI APPROACH
Materials Physics and Mechanics, 2012
[126] INFLUENCE OF FILLER MATERIAL ON GLASS FIBER/EPOXY COMPOSITE LAMINATES DURING DRILLING
International Journal of Advances in Engineering & Technology, 2012
[127] Investigation on sliding wear behaviour and mechanical properties of jatropha oil cake-filled glass-epoxy composites
Journal of the American Oil Chemists' Society, 2011
[128] Influence of Material Condition on the Dry Sliding Wear Behavior of Spring Steels
Journal of Minerals and Materials Characterization and Engineering, 2011
[129] Effect of Molybdenum Disulfide Nano-particles on Dry Sliding Behavior of Carbon Fiber Reinforced Epoxy
Tribology in Industry, 2010
[130] Tribological behavior of diamond-reinforced Fe-Co composite by Taguchi method
2009
[131] MECHANICAL AND TRIBOLOGICAL CHARATERISTICS OF CENOSPHERE PARTICLATES FILLED E-GLASS FIBER REIFORCED VINYLESTER …
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top