"Predicting Viscosity of Limestone–Water Slurry"
written by Pradipta Kumar Senapati, Dibakar Panda, Ashutosh Parida,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2009
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Particle-laden bubble size and its distribution in microstructured bubbling bed in presence and absence of a surface active agent
2019
[2] ОПРЕДЕЛЕНИЕ РЕОЛОГИЧЕСКИХ ХАРАКТЕРИСТИК ОДНОРОДНЫХ И БИМОДАЛЬНЫХ ЖИДКОСТНЫХ ПУЛЬП ЖЕЛЕЗНОЙ РУДЫ С ПОМОЩЬЮ …
2019
[3] Gas holdup in the gas-liquid-coal slurry flow in a flotation column in presence of surface active agent
2019
[4] A Rheological Method to Describe Metastable Hydrate-in-Oil Slurries
2019
[5] FRICTIONAL PRESSURE DROP IN A FLOTATION COLUMN: AN EXPERIMENTAL INVESTIGATION IN CONTINUOUS MODE AND ITS PREDICTION BY A GENERAL …
2019
[6] Inverse identification of viscosity coefficient for Newtonian and non‐Newtonian slurries during the turbulent pipeline transportation
2019
[7] Gas holdup and frictional pressure drop contributions in microstructured two-and three-phase bubbling bed with Newtonian and non-Newtonian liquids: Effect of …
Chemical Engineering and Processing - Process Intensification, 2018
[8] Study of the rheological behavior of the phosphate-water slurry and search for a suitable model to describe its rheological behavior
2018
[9] 경질탄산칼슘의 pigmentizing 을 위한 표면강도 증강제 탐색
2018
[10] Effect of particle size distribution on rheology of high concentration limestone–water slurry for economic pipeline transportation
Particulate Science And Technology, 2018
[11] Investigation of Rheological and Leaching Characteristics of Ash at Higher Concentrations
2018
[12] Natural bridging as a tertiary well control method in deep-water wells: A case study from Caspian Sea
Journal of Petroleum Science and Engineering, 2018
[13] Some Studies on Rheological and Pipeline Transportation of Concentrated Limestone–Water Slurry
2017
[14] Hydraulic transportation of coal combustion products for mine fill
Separation Science and Technology, 2017
[15] Shell porosity in spray fluidized bed coating with suspensions
Advanced Powder Technology, 2017
[16] Gas holdup characteristics in a flotation column with different solids
Issues in Mental Health Nursing, 2017
[17] STUDIES ON WATER STATUS IN HIGH CONCENTRATED SLURRY BASED ON LOW FIELD NUCLEAR MAGNETIC RESONANCE TECHNOLOGY
18th International Conference on TRANSPORT AND SEDIMENTATION OF SOLID PARTICLES, 2017
[18] Novel supercapacitors made of activated carbon with mechanical activation or through micro-extrusion of high concentration graphene slurries
ProQuest Dissertations Publishing, 2016
[19] Rheological characteristics of mixed kaolin–sand slurry, impacts of pH, temperature, solid concentration and kaolin–sand mixing ratio
International Journal of Environmental Science and Technology, 2016
[20] Effect of addition of bottom ash on the rheological properties of fly ash slurry at varying temperature
IOP Conference Series: Materials Science and Engineering, 2016
[21] Investigation towards a coupling between population balance and solidification models
2016
[22] Formulation and micro-extrusion of high concentration graphene slurries
Ceramics International, 2016
[23] Interfacial phenomena in gas hydrate systems
Chemical Society Reviews, 2016
[24] Modelling the pumping characteristics of power station ash in a dense phase hydraulic conveying system
2015
[25] VARIACIÓN DE LA VISCOSIDAD Y LA CALIDAD DEL LODO UTILIZADO PARA LA CONSTRUCCIÓN DE PILOTES, CONSIDERANDO LA CANTIDAD DE …
2015
[26] 以微粒子影像流速儀發展微量血液黏度量測技術
成功大學生物醫學工程學系學位論文, 2014
[27] Characterisation of highly active nuclear waste simulants
2014
[28] Characterization, Rheological and Pipe Loop Test Studies on Fly Ash Samples
2014
[29] Novel method for the identification of the maximum solid loading suitable for optimal extrusion of ceramic pastes
Journal of Advanced Ceramics, 2014
[30] Rheological properties of ceramic slurries with colloidal binders used in the investment casting technology
Metalurgija, 2013
[31] Effect of ball size and powder loading on the milling efficiency of a laboratory-scale wet ball mill
Ceramics International, 2013
[32] Two fluid model for solid liquid flows in pipeline systems
2013
[33] Analysis of Potential Bridging Scenarios During Blowout Events
SPE/IADC Drilling Conference, 2013
[34] Cuttings re-injection: studio di fattibilità del processo e progettazione della pompa centrifuga operante nel sistema
2013
[35] Rheological behaviour of NiO/YSZ slurries for drying-free casting
Powder Technology, 2012
[36] A Wellbore Stability Approach For Self-Killing Blowout Assessment
SPE Deepwater Drilling and Completions Conference, 2012
[37] Influence of particle size distributions on yield stress and viscosity of cement–fly ash pastes
Cement and Concrete Research, 2012
[38] Effect of Particle Size on the Lamellar Pore Microstructure of Porous Al2O3 Ceramics Fabricated by the Unidirectional Freezing
Applied Mechanics and Materials, 2012
[39] Interfacial phenomena of cyclopentane hydrate
ProQuest Dissertations Publishing, 2012
[40] Machining of micro-channels on brittle glass using an abrasive slurry jet
Key Engineering Materials, 2010
[41] 微磨料水射流加工脆性玻璃的冲蚀机理研究
金刚石与磨料磨具工程, 2010