Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Carbon Nanotube Reinforced Ceramic Matrix Composites- A Review"
written by Subhranshu Sekhar Samal, Smrutisikha Bal,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2008
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Multi-phase field modeling for various fracture mechanisms in composites
2021
[2] Influence of Cracking on the Durability of Reinforced Concrete with Carbon Nanotubes
2021
[3] Technical Review: Improvement of Mechanical properties and suitability towards Armor Applications–Alumina Composites
2021
[4] Effect of sintering temperature on the physiochemical properties, microstructure, and compressive strength of a bioceramic root canal sealer reinforced with multi …
2021
[5] Комбинационное рассеяние света и механизмы электропроводности в гибридных пленках из углеродных и неорганических нанотрубок
2020
[6] A Mass Approach towards Carbon Nanotubes in the Field of Nanotechnology
2020
[7] Modelling and optimisation of natural fibre reinforced polymer nanocomposite: application of mixture-design technique
2020
[8] Performance Testing of Ceramic-Metal Composites: A Review
2020
[9] Influence of Zinc Oxide Nanoparticles on the Optical, Dielectric and Electromagnetic Interference Shielding Performance of Polystyrene Films
2020
[10] A Review on
2020
[11] A review of non-soil biochar applications
2020
[12] Influence of Graphene and Graphene Oxide on Properties of Spark Plasma Sintered Si3N4 Ceramic Matrix
2020
[13] An investigation on the development and wear performance of chromium-MWCNTs transformed HVOF sprayed nano-WC-CoCr coatings
2020
[14] Graphene-Based Thermoelectrics
2020
[15] A comparative review of Mg/CNTs and Al/CNTs composite to explore the prospect of bimetallic Mg-Al/CNTs composites
2020
[16] Temporomandibular Disorders and BIO-IPNs: in vitro approach to find molecular solution to biological problem.
2020
[17] Intellectual Property Issues in Nanotechnology
2020
[18] A Review on Nanocomposites. Part 1: Mechanical Properties
2020
[19] Synthesis and material properties of polymer-derived niobium carbide and niobium nitride nanocrystalline ceramics
2020
[20] Ceramic Composite Based on Zirconia Reinforced by Single-Walled Carbon Nanotubes
2019
[21] Reinforcement effect of textured GnPs on advanced ceramics densified by SPS
2019
[22] Керамический композит на основе диоксида циркония, армированный одностенными углеродными нанотрубками
2019
[23] Reinforcement of alumina with carbon nano cones and characterization
2019
[24] Carbon-based polymer nanocomposites with enhanced conductive properties
2019
[25] Thermal Behavior of Spark Plasma Sintered Alumina-Based Nanocomposites
2019
[26] Effect of IrO2 crystallinity on electrocatalytic behavior of IrO2–Ta2O5/MWCNT composite as anodes in chlor-alkali membrane cell
2019
[27] LOW-DIMENSIONAL MATERIALS WITH PROTECTIVE COATINGS FOR APPLICATIONS UNDER EXTREME CONDITIONS
2019
[28] Effect of graphene nano-platelet addition on the microstructure and spark plasma sintering kinetics of zirconium diboride
2019
[29] Thermal Behavior of Spark Plasma Sintered Alumina-Based Nanocomposites.
2019
[30] Computational Modeling of Growth and Mechanical Behavior of Carbon-based Nanomaterials
2018
[31] FEATURES OF SYNTHESIS OF COMPOSITE MATERIAL BASED ON SILICON DIOXIDE AND CARBON NANOTUBES
Siberian Journal of Science and Technology, 2018
[32] Nanomaterials: Classification and Properties-Part I
2018
[33] Influence of SiC fiber on thermal cycling lifetime of SiC fibers/YSZ thermal barrier coatings by atmospheric plasma spraying
Ceramics International, 2018
[34] A simple and efficient route to synthesize hafnium carbide nanowires by catalytic pyrolysis of a polymer precursor
Ceramics International, 2018
[35] A Review on the Use of Hydroxyapatite-Carbonaceous Structure Composites in Bone Replacement Materials for Strengthening Purposes
Materials, 2018
[36] Nanocomposite Containing Cross‐linked Poly(Methyl‐Methacrylate)/Multiwall Carbon Nanotube as a Selective Y3+ Sensor Probe
Polymer composites, 2018
[37] On the Performance of Carbon Nanotubes on Sintered Alumina-Zirconia Ceramics
Sintering Technology-Method and Application, 2018
[38] Boron Nitride Nanotubes (BNNTs) Reinforced-polymer Derived Ceramic (PDC) Nanocomposites for Structural and Thermal Applications
2018
[39] Glass composites reinforced with silicon-doped carbon nanotubes
Carbon, 2018
[40] Synthesis and characterisation of multi-walled carbon nanotubes (MWCNTs)
International Journal of Ambient Energy, 2018
[41] A bridging cell multiscale modeling of carbon nanotube-reinforced aluminum nanocomposites
Composite Structures, 2018
[42] Получение композита Al2O3/МУНТ из наноразмерных порошков Al2O3 и его механические свойства
2017
[43] Multi-functionality of carbon nanotubes reinforced 3 mol% yttria stabilized zirconia structural biocomposites
Materials Science and Engineering: A, 2017
[44] Effects of Temperature on Thermodynamic parameters and Carbon Nanotubes Growth Rate on Aluminum Electrode in Electrochemical deposition Process
2017
[45] Fabrication and toughening behavior of carbon nanotube (CNT) scaffold reinforced SiBCN ceramic composites with high CNT loading
Ceramics International, 2017
[46] Fabrication and mechanical properties of SiC composites toughened by buckypaper and carbon fiber fabrics alternately laminated
Ceramics International, 2017
[47] Reinforcing mechanism of graphene at atomic level: Friction, crack surface adhesion and 2D geometry
Carbon, 2017
[48] Grain size effect in conductive phosphate/carbon nanotube ceramics
Ceramics International, 2017
[49] The Life Cycle of Engineered Nanoparticles
Modelling the Toxicity of Nanoparticles, 2017
[50] Desempenho Materiais Cerâmicos Refratários com adição de Sílica Residual da Casca de Arroz e NTC
2017
[51] Preparation of SiC–MgAl2O4–Y3Al5O12-MWCNTs nanocomposites by spark plasma sintering
IOP Conference Series: Materials Science and Engineering, 2017
[52] Thermal resistant, mechanical and electrical properties of a novel ultrahigh-content randomly-oriented CNTs reinforced SiC matrix composite-sheet
Composites Part B: Engineering, 2017
[53] Carbon Nanotubes Reinforced Aluminum Matrix Composites-A Review of Processing Techniques
2017
[54] Non-linear electrical conductivity of carbon nanotubes/WS2 nanotubes (nanoparticles) hybrid films
2017
[55] ASCIENTIAE RERUM
2016
[56] Влияние дисперсий многослойных углеродных нанотрубок на физико-механические характеристики и структуру строительной керамики
2016
[57] SWCNTs versus MWCNTs as Reinforcement Agents in Zirconia-and Alumina-based Nanocomposites: Which One to Use
2016
[58] REINFORCING EFFECT OF GRAPHENE OXIDE ON CEMENT MORTAR UNDER HIGH STRAIN RATE LOADINGS
2016
[59] Building stonewares modifications by dispersions of multi-walled carbon nanotubes
2016
[60] Chitin and Chitosan: Structure, Properties and Applications in Biomedical Engineering
Journal of Polymers and the Environment, 2016
[61] Preparation and properties of a composite SiC with addition of multi-walled carbon nanotubes synthesized in the plasma jet
Journal of Physics: Conference Series, 2016
[62] МОДИФИКАЦИЯ СТРОИТЕЛЬНОЙ КЕРАМИКИ СУСПЕНЗИЯМИ, СОДЕРЖАЩИМИ УГЛЕРОДНЫЕ НАНОТРУБКИ
2016
[63] A study of processing and slurry erosion behaviour of multi-walled carbon nanotubes modified HVOF sprayed nano-WC-10Co-4Cr coating
Surface and Coatings Technology, 2016
[64] Fabrication of Carbon Nanotube Reinforced Al2O3/Cr2O3 Nanocomposites by Coprecipitation Process
Al-Khwarizmi Engineering Journal, 2016
[65] POWER GENERATION FROM UNTAPPED SOURCES IN DAY TO DAY LIFE
International Journal of Research in Advanced Technology -IJORAT, 2016
[66] МОДИФИКАЦИЯ СТРОИТЕЛЬНОЙ КЕРАМИКИ ДИСПЕРСИЯМИ МНОГОСЛОЙНЫХ УГЛЕРОДНЫХ НАНОТРУБОК
2016
[67] Ударопрочные материалы на основе технической керамики: достижения и перспективы повышения их баллистической эффективности
2016
[68] Nanocomposites
Characterization of Carbon Nanotube Based Composites under Consideration of Defects, 2016
[69] In-situ synthesis silicon nitride nanowires in carbon fiber felts and their effect on the mechanical properties of carbon/carbon composites
Materials & Design, 2016
[70] Role of Microstructural Features in Toughness Improvement of Zirconia Toughened Alumina
Journal of Minerals and Materials Characterization and Engineering, 2016
[71] Characterisation and Properties Improvement of Armour Ceramics
2016
[72] Fabrication of Al2O3–Ni–CNTs nanocomposites by co-precipitation of CNTs and Ni nanoparticle on Al2O3 powder and spark plasma sintering
Journal of the Ceramic Society of Japan, 2016
[73] Utilization of Nanofibers in Sintered Ceramic Body Based on Calcium Aluminous Cement
Materials Science Forum, 2016
[74] Shock-Resistant Materials Based on Commercial Grade Ceramic: Achievements and Prospects for Improving Their Ballistic Efficiency
Refractories and Industrial Ceramics, 2016
[75] Production of graphene based materials and their potential applications
2015
[76] Characterization of yttria stabilized zirconia and carbon nanotube doped: YSZ ceramic composites fabricated by spark plasma sintering
2015
[77] MODELING THE HYGRO-THERMO-MECHANICAL AGGLOMERATION RELATIONS OF CARBON-EPOXY HYBRID NANOCOMPOSITES
International Journal for Multiscale Computational Engineering, 2015
[78] Applications of Carbon Nanotubs and Other Nanomagnetic Nanowires
Progress In Electromagnetics Research Symposium Proceedings, 2015
[79] Nanomaterials Release from Nano-Enabled Products
Indoor and Outdoor Nanoparticles, 2015
[80] An exact analysis for the hoop elasticity and pressure-induced twist of CNT-nanovessels and CNT-nanopipes
Mechanics of Materials, 2015
[81] Fabrication and tensile behaviors of mini C/SiC composites Reinforced by Si3N4 Nanowires
Materials Science and Engineering: A, 2015
[82] In-vitro bioactivity of nanocrystalline and bulk larnite/chitosan composites: comparative study
Journal of Sol-Gel Science and Technology, 2015
[83] Alumina Matrix Composites with Non-Oxide Nanoparticle Addition and Enhanced Functionalities
Nanomaterials, 2015
[84] Role of Defect Density in Optimizing MWCNT-Polymer Composite Sensor Performance: Tuning of Its Acceptable Limit by Acid Treatment Condition
Science of Advanced Materials, 2015
[85] Hygro-Thermo-Electric Properties of CNT Epoxy Nanocomposites With Agglomeration Effects
Mechanics of Advanced Materials and Structures, 2015
[86] Effect of Incorporation Techniques of Nanomaterials on Strength of Cement-based Materials
The 2nd International Conference of Buildings, Construction and Environmental Engineering (BCEE2-2015), 2015
[87] CHARACTERIZATION of HIGH STRAIN RATE BEHAVIOR of TAC/CNTs/SIC CMCs PREPARED by SPARK PLASMA SINTERING
2015
[88] Fracture behaviour of α-Al2O3 ceramics reinforced with a mixture of single-wall and multi-wall carbon nanotubes
Composites Part B: Engineering, 2014
[89] МОДЕЛИРОВАНИЕ НЕСТАЦИОНАРНЫХ ПРОЦЕССОВ КАТАЛИТИЧЕСКОГО СИНТЕЗА УГЛЕРОДНЫХ НАНОТРУБОК В ПСЕВДООЖИЖЕННОМ СЛОЕ
2014
[90] МОДЕЛИРОВАНИЕ СВОЙСТВ КЕРАМИЧЕСКОГО КОМПОЗИТА С ПОМОЩЬЮ ПЕРЦЕПТРОННЫХ КОМПЛЕКСОВ
2014
[91] Role Of Carbon Nanotubes Reinforcement And Processing Parameters On Mechanical Properties Of Alumina Based Nanocomposites
2014
[92] Tailoring Carbon Fiber/Carbon Nanotubes Interface to Optimize Mechanical Properties of Cf‐CNTs/SiC Composites
International Journal of Applied Ceramic Technology, 2014
[93] MWCNT-conducting polymer composite based ammonia gas sensors: A new approach for complete recovery process
Sensors and Actuators B: Chemical, 2014
[94] Investigation of thermal stability studies of MWCNT-conducting polymer based composites for heat sensing application
interaction, 2014
[95] Investigations on the surface characteristics of grinding and edm processes using carbon nanotubes
2014
[96] Simulation of transient processes of the catalytic synthesis of carbon nanotubes in a fluidized bed
Theoretical Foundations of Chemical Engineering, 2014
[97] Effect of sintering temperature and nanotube concentration on microstructure and properties of carbon nanotube/alumina nanocomposites
Ceramics International, 2014
[98] In-situ synthesis and growth mechanism of silicon nitride nanowires on carbon fiber fabrics
Ceramics International, 2014
[99] Improving the mechanical and thermal properties of semi-coke based carbon/copper composites reinforced using carbon nanotubes
S Kumari, A Kumar, PR Sengupta, PK Dutta, RB Mathur - amlett.com, 2014
[100] Phase transformation-dependent sensing performance of multi-walled carbon nanotube–alumina nanocomposite-based gas sensors
Materials Science in Semiconductor Processing, 2014
[101] MWCNT/Alumina Nanocomposite Characterization and Toughening Mechanism of Uniform Dispersion
Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 2014
[102] Dielectric Properties of Elastomeric Modified Epoxies
Micro and Nanostructured Epoxy/Rubber Blends, 2014
[103] A Novel Approach for the Processing of Advanced Polymer Derived Ceramics with Carbon Nanotubes with the Help of Pores
Advanced Engineering Materials, 2014
[104] Novel Functionalized Polymers in Drug Delivery: A Brief Review
Journal of Current Pharma Research, 2014
[105] Vyu?ití nanovláken ve st?epu tradi?ní keramiky
2014
[106] In Situ Formation of Nanoparticle Titanium Carbide/Nitride Shaped Ceramics from Meltable Precursor Composition
The Journal of Physical Chemistry C, 2014
[107] Tailoring carbon nanotube/matrix interface to optimize mechanical properties of multiscale composites
Carbon, 2014
[108] DISPERSION OF MULTI-WALLED CARBON NANOTUBES IN BUILDING SCIENCE OF MATERIALS.
Science & Technique, 2014
[109] ДИСПЕРСИИ МНОГОСЛОЙНЫХ УГЛЕРОДНЫХ НАНОТРУБОК В СТРОИТЕЛЬНОМ МАТЕРИАЛОВЕДЕНИИ
2014
[110] VYUŽITÍ NANOVLÁKEN VE STŘEPU TRADIČNÍ KERAMIKY
2014
[111] Simulations of Carbon Nano-Structures for High-Strength Composites, Thermal Transport, and Hydrogen Storage
2014
[112] Titaankarbiidi ja süsiniknanotorude komposiidi sünteesimeetodi väljatöötamine kasutades sool-geel tehnoloogiat
2014
[113] Zrc-tic Kompozitinin Spark Plazma Sinterleme (sps) Yöntemi İle Üretimi Ve Karakterizasyonu
2013
[114] THµSE
2013
[115] Multi-Walled Carbon Nanotube/Alumina Composite: Synthesis, Characterization and Its Promising Application for Ammonia Detection
Energy and Environment Focus, 2013
[116] Development of MWCNTs/alumina composite-based sensor for trace level ammonia gas sensing
Applied Physics A, 2013
[117] Mechanics and morphology of single-walled carbon nanotubes: from graphene to the elastica
Philosophical Magazine, 2013
[118] Nanocomposites nanotubes de carbone-céramique à microstructure contrôlée: préparation et propriétés
2013
[119] In‐Situ Growth of Carbon Nanotubes in Three Dimensional Needle‐Punched Carbon Fabrics and Hybrid Enhancement to C/SiC Composites
Nanostructured Materials and Nanotechnology, 2013
[120] Tribological properties and applications of alumina
2013
[121] A methodology for constitutive relationships estimation for SWNT reinforced composites
Engineering Computations, 2013
[122] Analysis of Aluminium Nano Composites using Anova in CNC Machining Process
2013
[123] Properties and Applications of Aligned Carbon Nanotube Arrays
Aligned Carbon Nanotubes, 2013
[124] An enhanced continuum modeling of the ideal strength and the angle of twist in tensile behavior of single-walled carbon nanotubes
Journal of Applied Physics, 2013
[125] 骨组织工程支架材料应用于大段骨缺损的实验研究进展
创伤外科杂志, 2013
[126] Carbon nanotubes in new materials
Russian Chemical Reviews, 2013
[127] Nanostructured Materials and Nanotechnology VI Edited by Sanjay Mathur and Suprakas Sinha Ray Copyright© 2013 The American Ceramic Society
2013
[128] Наномодифицирование керамических материалов строительного назначения
2013
[129] Перспективы наномодифицирования керамических материалов строительного назначения
2013
[130] Керамои стеклокерамоматричные нанокомпозиты, армированные углеродными нанотрубками
2013
[131] Laser micromachining, sintering, and laser-induced plasma deburring
ProQuest Dissertations Publishing, 2013
[132] Zrc-sic Kompozitlerinin Spark Plazma Sinterleme (sps) Yöntemi İle Üretimi Ve Karakterizayonu
2013
[133] Perspectives of nano-modification of ceramic materials for building purposes
2013
[134] Углеродные нанотрубки в новых материалах
2013
[135] Examples for Nanotechnological Applications in the Energy Sector
2012
[136] ИОНООБМЕННАЯ СОРБЦИЯ ЦИРКОНИЯ ФУНКЦИАЛИЗОВАННЫМИ УГЛЕРОДНЫМИ НАНОВОЛОКНАМИ
2012
[137] Al2o3–Zro2–Ceo2 Kompozitlerinin Spark Plazma Sinterleme (sps) yöntemi İle Üretimi Ve Karakterizasyonu
2012
[138] Selectively depositing Pt nanoparticles on pre-treated electrically conductive porous alumina and its electrochemical studies
Ceramics International, 2012
[139] Ion-exchange zirconium sorption by functionalized carbon nanofibers
Inorganic Materials, 2012
[140] Microstructure and physicomechanical properties of pressureless sintered multiwalled carbon nanotube/alumina nanocomposites
Ceramics International, 2012
[141] Laponite assisted dispersion of carbon nanotubes in water
Journal of colloid and interface science, 2012
[142] Temperature and load dependent mechanical properties of pressureless sintered carbon nanotube/alumina nanocomposites
Materials Science and Engineering: A, 2012
[143] Thermomechanical behavior of bulk Ni/MWNT composites produced via powder metallurgy
Advanced Engineering Materials, 2012
[144] Ionoobmennaya sorbtsiya tsirkoniya funktsializovannymi uglerodnymi nanovoloknami
Neorganicheskie materialy, 2012
[145] Analysis of Cnt/Fe415 Steel Nan composites Using Taguchi Analysis in Cnc Lathe Process
J Singh, K Maheshwari, K Ankit - SRM University, 2012
[146] Molecular Simulations on Interfacial Sliding of Carbon Nanotube Reinforced Alumina Composites
2012
[147] Research Progress in SiC-Based Ceramic Matrix Composites
Journal of the Korean Ceramic Society, 2012
[148] Carbon nanotubes (CNTs) and mechanical properties of Al2O3 and zirconia toughened alumina (ZTA) composites reinforced by them: a review
2012
[149] Properties of carbon nano-tubes–Cf/SiC composite by precursor infiltration and pyrolysis process
Materials & Design, 2011
[150] Thermal Sprayed CNT Reinforced Nanocomposite Coatings–A Review
Journal of Minerals and Materials Characterization and Engineering, 2011
[151] Fabrication and Characterization of Alumina/CNTs Nanocomposite Powders, by CCVD Method and Investigation of the Parameter Involved
Journal of Chemistry and Chemical Engineering, 2011
[152] Processing and properties of alumina–carbon nano fibre ceramic composites using standard ceramic technology
Ceramics International, 2011
[153] Thermally Conductive Ceramic Matrix Composites
Advanced Materials for Thermal Management of Electronic Packaging. Springer New York, 2011
[154] Laser sintering of carbon nanotube-reinforced ceramic nanocomposites
International Journal of Smart and Nano Materials, 2011
[155] A novel zeolite-multiwalled carbon nanotube composite for the electroanalysis of copper (II) ion
Journal of Applied Electrochemistry, 2011
[156] Interaction behavior of a silicon dioxide nanotube interface
Journal of Computational and Theoretical Nanoscience, 2011
[157] A comparison of the effects of multi-wall and single-wall carbon nanotube additions on the properties of zirconia toughened alumina composites
Carbon, 2011
[158] Non-isothermal oxidation kinetics of single-and multi-walled carbon nanotubes up to 1273 K in ambient
Journal of thermal analysis and calorimetry, 2011
[159] Макроматериалы из углеродных нанотрубок и с углеродными нанотрубками
2011
[160] Investigation into gas flaring reduction in the oil and gas industry
2010
[161] Chitosan composites for bone tissue engineering—An overview
Marine drugs, 2010
[162] Characterization of exposures to nanoscale particles and fibers during solid core drilling of hybrid carbon nanotube advanced composites
International journal of occupational and environmental health, 2010
[163] High-aspect-ratio, free-form patterning of carbon nanotube forests using micro-electro-discharge machining
Diamond and Related Materials, 2010
[164] Sinter and hot isostatic pressing (HIP) of multi-wall carbon nanotubes (MWCNTs) reinforced ZTA nanocomposite: microstructure and fracture toughness
International Journal of Refractory Metals and Hard Materials, 2010
[165] Effect of Carbon Nanotube on Gun Metal
HA Gafoor, S Murugesh - SRM University, 2010
[166] Effect of Multi-Walled Carbon Nanotubes on Viability and Superoxide Dismutase Expression in Human Wound Pathogens
International Journal of Nanoscience, 2009
[167] Effect of Incorporation Techniques of Nanomaterials on Strength of Cement-based Materials‖
[168] Studijní program N3607 Stavební inženýrství
[169] SYNTHESIS AND CHARACTERIZATION OF SEMI COKE BASED CARBON NANO COMPOSITES WITH CARBON AND COPPER
[170] 3D Nanomaterials and Their Optoelectronic Applications
Free SCIRP Newsletters
Copyright © 2006-2022 Scientific Research Publishing Inc. All Rights Reserved.
Top