Journal of Analytical Sciences, Methods and Instrumentation

Journal of Analytical Sciences, Methods and Instrumentation

ISSN Print: 2164-2745
ISSN Online: 2164-2753
www.scirp.org/journal/jasmi
E-mail: jasmi@scirp.org
"Comparison between Pigment Printing Systems with Acrylate and Butadiene Based Binders"
written by Mansoor Iqbal, Javaid Mughal, Munazza Sohail, Arsheen Moiz, Kamran Ahmed, Khalil Ahmed,
published by Journal of Analytical Sciences, Methods and Instrumentation, Vol.2 No.2, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] A New Route for Synthesis of Polyurethanevinyl Acetate Acrylate Emulsions as Binders for Pigment Printing of Cotton Fabrics
2020
[2] Optimization of Self-crosslinking Comonomer Composition of Polymer Binder for DTP Pigment Ink
2020
[3] DTP 안료 잉크용 고분자 바인더의 Self-crosslinking 공단량체 조성 최적화 연구
2020
[4] The effect of ultraviolet‐curable water‐borne polyurethane acrylate binder concentration on the printing performance of synthetic leather
Coloration Technology, 2019
[5] Preparation of Silicone-Modified Acrylate Latex and its Application for Low-Emission Printing of Pet Fibre
2019
[6] A novel approach in pigment printing using nano-keratin based binder
2018
[7] A novel study of comparison properties of pigment and reactive dye-printed cotton fabric
Journal of Natural Fibers, 2018
[8] Advances in textile printing
International Journal of Textile Science and Engineering, 2018
[9] Mejoramiento de la absorción de nanopartículas de plata en telas de algodón, utilizando un ligante
2017
[10] Improvement of silver nonoporticle impregnation on cotton fabrics using o binder
Revista Facultad de Ingeniería?, 2017
[11] Synthesis of Polyacrylate Binder by Emulsion Polymerization and Application on Cotton.
Asian Journal of Chemistry, 2017
[12] Synthesis of core–shell-type styrene acrylic latexes with low NMA content and their application in pigment printing pastes
Journal of Coatings Technology and Research, 2017
[13] Effect of pigment concentration on fastness and color values of thermal and UV curable pigment printing
IOP Conference Series: Materials Science and Engineering, 2017
[14] Comparative analysis of granular neighborhoods in a Tabu Search for the vehicle routing problem with heterogeneous fleet and variable costs (HFVRP)
Revista Facultad de Ingeniería, 2017
[15] Optimization study for Waterproof Breathable Polyester fabric
2016
[16] Evaluación de las propiedades bactericidas de tejidos impregnados con nanopartículas de plata
2016
[17] EVALUATION OF FLEXURAL RIGIDITY AND ABRASION RESISTANCE OF POST AND META-FINISHED PIGMENT DYED P/C FABRICS
2016
[18] 聚倍半硅氧烷改性聚丙烯酸酯涂料印花性能
印染助剂, 2016
[19] Pigment Printing of Cotton Fabrics using Microwave Irradiation
Research Journal of Chemical Sciences, 2015
[20] Single-stage process for bifunctionalization and eco-friendly pigment coloration of cellulosic fabrics
The Journal of The Textile Institute, 2015
[21] SIMULTANEOUS PIGMENT DYEING AND FUNCTIONAL FINISHING OF COTTON/POLYESTER BLENDED FABRICS
2015
[22] 功能性织物印花用胶粘剂的研究进展
中国胶粘剂, 2014
[23] Evaluation of Washfastness and Crockfastness Values: Pigment Printed Fabrics
AATCC Journal of Research, 2014
[24] Pigment Dyeing and Finishing of Cotton/Polyester Fabrics with a Modified Dihydroxyethyleneurea and various Softener Treatment
Life Science Journal, 2014
[25] A smart approach to add antibacterial functionality to cellulosic pigment prints
Carbohydrate polymers, Elsevier , 2013
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top