Advances in Chemical Engineering and Science

Advances in Chemical Engineering and Science

ISSN Print: 2160-0392
ISSN Online: 2160-0406
www.scirp.org/journal/aces
E-mail: aces@scirp.org
"Nanomechanical Analysis of Hybrid Silicones and Hybrid Epoxy Coatings—A Brief Review"
written by Atul Tiwari,
published by Advances in Chemical Engineering and Science, Vol.2 No.1, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Mechanical analysis of lateral uplift of aluminum film scribed by grating
2020
[2] Mechanical scribing test analysis of lateral ridges law on aluminum
2020
[3] Studies on Mechanical properties of Graphite reinforced Ti (Cx, N1-x) using Nanoindentation techniques
2019
[4] Effect of sulfuric acid solution on thermal conductivity and impact strength of epoxy resin reinforced by silicon dioxide powder
2019
[5] Epoksi nanokompozit kaplamalara katılan silika ve grafen nanopartiküllerin kaplamanın mekanik özelliklerine etkileri
2019
[6] The effect of annealing on the behavior of polyetheretherketone composites compared to pure titanium
2019
[7] ВЛИЯНИЕ СОСТАВА И УСЛОВИЙ ПОЛУЧЕНИЯ НА СВОЙСТВА ЭПОКСИДНО-КРЕМНЕЗЕМНЫХ КОМПОЗИТОВ АМИННОГООТВЕРЖДЕНИЯ
2019
[8] Development and evaluation of aluminium-based thin films as potential alternatives to cadmium coatings
2018
[9] Tribological Assessment on Accelerated Aging Bones in Polymeric Condition
Synthesis and Tribological Applications of Hybrid Materials, 2018
[10] The study of the bending property of the epoxy (Ep/MgO) and (Ep/SiO2) composites in natural conditions and after immersion in chemical solution
2018
[11] Experimentální analýza mechanických vlastností buněčné membrány
2018
[12] УСТОЙЧИВОСТЬ ЭПОКСИДНО-КРЕМНЕЗЁМНЫХ КОМПОЗИТОВ К ВЫСОКОТЕМПЕРАТУРНОМУ ОКИСЛЕНИЮ
2017
[13] Nanoscale Characterization of Glass Flake Filled Vinyl Ester Anti-Corrosion Coatings
Coatings, 2017
[14] Structural and Mechanical Characterization of Nanocrystalline Tungsten and Tungsten-Based Alloy Thin Films for Extreme Environment Applications
ProQuest Dissertations Publishing, 2017
[15] УСТОЙЧИВОСТЬ ЭПОКСИДНО-КРЕМНЕЗЁМНЫХ КОМПОЗИТОВ АМИННОГО ОТВЕРЖДЕНИЯ К ТЕРМООКИСЛИТЕЛЬНОЙ ДЕГРАДАЦИИ
2017
[16] Effect of interface on the thermal mechanical properties of chemically bonded epoxy-silica hybrids
Progress in Organic Coatings, 2017
[17] Enhancement of tribological performance of epoxy bulk composites and composite coatings using micro/nano fillers: a review
Polymers for advanced technologies, 2016
[18] Intrinsic and metal-doped gallium oxide based high-temperature oxygen sensors for combustion processes
2016
[19] Nanodielétricos de matriz polimérica epoxídica reforçada por nanopartículas de óxidos metálicos
2015
[20] Determining the viscoelastic properties obtained by depth sensing microindentation of epoxy and polyester thermosets using a new phenomenological method
Materials Research Express, 2015
[21] Novel epoxy–silica nano-composites using epoxy-modified silica hyper-branched structure
Progress in Organic Coatings, 2015
[22] 机械刻划纯铝侧向隆起规律试验
塑性工程学报, 2015
[23] Preparation and characterization of epoxy–silica networks chemically bonded through aminophenyl-trimethoxysilane
Journal of Sol-Gel Science and Technology, 2014
[24] AFM nanoscale indentation in air of polymeric and hybrid materials with highly different stiffness
Applied Surface Science, 2014
[25] A Novel Integrated Heater and Sensor for Injection Molding Applications
2014
[26] Nanostructured coating based on epoxy/metal oxides: Kinetic curing and mechanical properties
Thermochimica Acta, 2013
[27] A Brief Review of Nanoindentation Technique and its Applications in Hybrid Nanocomposite Coatings
Int. J. Bio-Inorg. Hybd. Nanomat, 2013
[28] Effect of inorganic constituent on nanomechanical and tribological properties of polymer, quasi-ceramic and hybrid coatings
Surface and Coatings Technology, 2012
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top