Journal of Biomedical Science and Engineering

Journal of Biomedical Science and Engineering

ISSN Print: 1937-6871
ISSN Online: 1937-688X
www.scirp.org/journal/jbise
E-mail: jbise@scirp.org
"A method to fabricate small features on scaffolds for tissue engineering via selective laser sintering"
written by S. Lohfeld, M. A. Tyndyk, S. Cahill, N. Flaherty, V. Barron, P. E. McHugh,
published by Journal of Biomedical Science and Engineering, Vol.3 No.2, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Bone Tissue Regeneration: Rapid Prototyping Technology in Scaffold Design
Journal of The Institution of Engineers (India) …, 2022
[2] A Review of Bone Regeneration Mechanisms and Bone Scaffold Fabrication Techniques (Conventional and Non-Conventional)
Journal of The Institution of Engineers (India) …, 2022
[3] Selective Laser Sintering of Cellulose Reinforced PHBV Powder to Manufacture Scaffolds for Bone Tissue Regeneration
2021
[4] Inner strut morphology is the key parameter in producing highly porous and mechanically stable poly (ε-caprolactone) scaffolds via selective laser sintering
2021
[5] Design of 3D printed scaffolds for bone tissue engineering: A review
Bioprinting, 2021
[6] A Review of biomaterials and scaffold fabrication for organ-on-a-chip (OOAC) systems
Bioengineering, 2021
[7] Design and characterization of multiscale hybrid scaffolds for endochondral ossification
2021
[8] Fabrication of a Porous Three-Dimensional Scaffold with Interconnected Flow Channels: Co-Cultured Liver Cells and In Vitro Hemocompatibility Assessment
2021
[9] Advances in 3D Printing for Tissue Engineering
2021
[10] Trends in Selective Laser Sintering in Biomedical Engineering
2020
[11] Methodische Entwicklung einer modularen Lasersintermaschine zur Herstellung von bioresorbierbaren Implantatmatrizen
2020
[12] Melt-based, solvent-free additive manufacturing of biodegradable polymeric scaffolds with designer microstructures for tailored mechanical/biological properties and …
2020
[13] Recent advances in additive manufacturing technology for bone tissue engineering scaffolds
2020
[14] Novel and Emerging Materials Used in 3D Printing for Oral Health Care
2020
[15] 3D Printing for Hip Implant Applications: A Review
2020
[16] Structural, thermal and mechanical changes in poly (L–lactide)/hydroxyapatite composite extruded foils modified by CO2 laser irradiation
2019
[17] Akermanite reinforced PHBV scaffolds manufactured using selective laser sintering
2019
[18] A 3D‐printed polycaprolactone/β‐tricalcium phosphate mandibular prosthesis: A pilot animal study
2019
[19] Bioprinting for Liver Transplantation
2019
[20] Biomechanical analysis of implantation of polyamide/hydroxyapatite shifted architecture porous scaffold in an injured femur bone
2019
[21] ATINER's Conference Paper Series MEC2017-2378
2018
[22] Synthesis, microstructure, and mechanical behaviour of a unique porous PHBV scaffold manufactured using selective laser sintering
Journal of the Mechanical Behavior of Biomedical Materials, 2018
[23] Implementation of Industrial Additive Manufacturing: Intelligent Implants and Drug Delivery Systems
Journal of Functional Biomaterials, 2018
[24] 3D Printing Cellulose Hydrogels Using LASER Induced Thermal Gelation
Journal of Manufacturing and Materials Processing, 2018
[25] Additive Manufacturing with 3D Printing: Progress from Bench to Bedside
The AAPS Journal, 2018
[26] Morphological Characterization of Hydrogels
Cellulose-Based Superabsorbent Hydrogels, 2018
[27] 3D Printing—Additive Manufacturing of Dental Biomaterials
2018
[28] Manufacturing the Gas Diffusion Layer for PEM Fuel Cell Using a Novel 3D Printing Technique and Critical Assessment of the Challenges Encountered
Materials, 2017
[29] Biocompatible 3D printed polymers via fused deposition modelling direct C 2 C 12 cellular phenotype in vitro
Lab on a Chip, 2017
[30] Designing patient-specific melt-electrospun scaffolds for bone regeneration
2017
[31] Open-Source Selective Laser Sintering (OpenSLS) of Nylon and Biocompatible Polycaprolactone
PloS one, 2016
[32] Tissue Engineering Scaffolds for Repairing Soft Tissues
Microsystems for Enhanced Control of Cell Behavior, 2016
[33] Tissue Engineering Scaffolds for 3D Cell Culture
Microsystems for Enhanced Control of Cell Behavior, 2016
[34] Biofabrication: The Future of Regenerative Medicine
Techniques in Orthopaedics, 2016
[35] Adaptive modeling method for 3-D printing with various polymer materials
Fibers and Polymers, 2016
[36] Tissue Engineering Scaffolds for Bone Repair: General Aspects
Microsystems for Enhanced Control of Cell Behavior, 2016
[37] Design, analysis and fabrication of polyamide/hydroxyapatite porous structured scaffold using selective laser sintering method for bio-medical applications
Journal of Mechanical Science and Technology, 2016
[38] Assessment of biocompatibility of 3D printed photopolymers using zebrafish embryo toxicity assays
Lab on a Chip, 2016
[39] Composite scaffolds for osteochondral repair obtained by combination of additive manufacturing, leaching processes and hMSC-CM functionalization
Materials Science and Engineering: C, 2016
[40] A New File Format to Describe Fiber-reinforced Composite Workpiece Structure for Additive Technology Machines
Procedia Engineering, 2015
[41] The Fabrication of Integrated Strain Sensors for “Smart” Implants using a Direct Write Additive Manufacturing Approach
2015
[42] Evaluating the effect of increasing ceramic content on the mechanical properties, material microstructure and degradation of selective laser sintered polycaprolactone/β-tricalcium phosphate materials
Medical engineering & physics, 2015
[43] Evaluating the effect of increasing ceramic content on the mechanical properties, material microstructure and degradation of selective laser sintered polycaprolactone …
Medical Engineering & Physics, 2015
[44] Improving the finite element model accuracy of tissue engineering scaffolds produced by selective laser sintering
Journal of Materials Science: Materials in Medicine, 2015
[45] Optimisation of process parameters for lattice structures
Rapid Prototyping Journal, 2015
[46] Recent advances in 3D printing of biomaterials
Journal of biological engineering, 2015
[47] Free-Form Rapid Prototyped Porous PDMS Scaffolds Incorporating Growth Factors Promote Chondrogenesis
Advances in Materials Science and Engineering?2014?, 2014
[48] Controlling the porosity of collagen, gelatin and elastin biomaterials by ultrashort laser pulses
Applied Surface Science, 2014
[49] Predicting the Elastic Properties of Selective Laser Sintered PCL/β-TCP Bone Scaffold Materials Using Computational Modelling
Annals of biomedical engineering, 2014
[50] Evaluation of a Multiscale Modelling Methodology to Predict the Mechanical Properties of PCL/β-TCP Sintered Scaffold Materials
Materials Science and Engineering: C, 2014
[51] Fabrication of dual-pore scaffolds using SLUP (salt leaching using powder) and WNM (wire-network molding) techniques
Rapid Prototyping Journal, 2014
[52] 삼차원 폴리카프로락톤 스캐폴드 지지대 형상에 따른 조골모세포의 부착에 관한 연구
2014
[53] Review of rapid prototyping techniques for tissue engineering scaffolds fabrication
Characterization and Development of Biosystems and Biomaterials. Springer Berlin Heidelberg, 2013
[54] DEVELOPMENT OF COMPLEX POROUS POLYVINYL ALCOHOL SCAFFOLDS: MICROSTRUCTURE, MECHANICAL, AND BIOLOGICAL EVALUATIONS
Journal of Mechanics in Medicine and Biology, 2013
[55] Processing and characterization of laser sintered hydroxyapatite scaffold for tissue engineering
Biotechnology and Bioprocess Engineering, 2013
[56] Additive manufacturing of lab-on-a-chip devices: promises and challenges
SPIE Micro+ Nano Materials, Devices, and Applications. International Society for Optics and Photonics, 2013., 2013
[57] A Process Engineering Perspective of Scaffold Fabrication Methods in Regenerative Medicine: A Review
IIE Annual Conference. Proceedings, 2012
[58] Rapid prototyping for biomedical engineering: current capabilities and challenges
Annual review of biomedical engineering, 2012
[59] Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds
Acta biomaterialia, 2012
[60] Tissue Engineering Using Novel Rapid Prototyped Diamond‐Like Carbon Coated Scaffolds
Plasma Processes and Polymers, 2012
[61] Fabrication of Tissue Engineering Scaffolds Using Rapid Prototyping Techniques
World Academy of Science, Engineering and Technology, International Science Index, 2011
[62] Selective Laser Melting of Porous Structures
Proceedings of the 22nd Annual International Solid Freeform Fabrication (SFF) Symposium, University of Texas, Austin, 2011
[63] Fabrication of Tissue Eng Using Rapid Prototyp
OA Abdelaal, SM Darwish - Citeseer, 2011
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top