|
[1]
|
Optimization of hot turning parameters using principal component analysis method
|
|
2020 |
|
|
|
|
[2]
|
Performance analysis of peristaltic pump with non-newtonian fluid: A taguchi approach
|
|
2020 |
|
|
|
|
[3]
|
Optimization of Turning Process: Optimization of Turning Process Parameters by Using Tool Inserts
|
|
2019 |
|
|
|
|
[4]
|
Optimization of Process Parameters in TIG Welded Joints of AISI 304L-Austenitic Stainless Steel using Taguchi's Experimental Design Method
|
|
2019 |
|
|
|
|
[5]
|
A multivariate quality loss function approach for parametric optimization of non-traditional machining processes
|
|
2018 |
|
|
|
|
[6]
|
Application of utility concept approach for multi-response optimisation of wire electrical discharge machining during profile cutting of Inconel-625
|
|
International Journal of Machining and Machinability of Materials,
2018 |
|
|
|
|
[7]
|
Multi-Feature Optimization of WEDM for Ti-6Al-4V by Applying a Hybrid Approach of Utility Theory Integrated With the Principal Component Analysis
|
|
International Journal of Materials Forming and Machining Processes (IJMFMP),
2018 |
|
|
|
|
[8]
|
Multi-quality Response Optimization of Wire EDM for Ni-75 using PCA based Utility theory
|
|
Materials Today: Proceedings,
2018 |
|
|
|
|
[9]
|
Analysis of Surface Roughness during Turning Operation by Taguchi Method
|
|
2018 |
|
|
|
|
[10]
|
Effect of Process Parameters in Turning 20MnCr5 using Taguchi's Technique
|
|
2018 |
|
|
|
|
[11]
|
Optimization of WEDM Process using Taguchi Utility Analysis
|
|
2018 |
|
|
|
|
[12]
|
Desirability Function with Principal Component Analysis for Multi-response Optimization
|
|
2017 |
|
|
|
|
[13]
|
Experimental Investigation of Turning Process Parameters of Nimonic-80 Using Taguchi's Design Of Experiment
|
|
2017 |
|
|
|
|
[14]
|
Parametric modelling of multiple quality characteristics in turning of CP titanium grade-2 with cryo-treated inserts
|
|
International Journal of Materials and Product Technology,
2017 |
|
|
|
|
[15]
|
Multi objective optimization of turning parameters considering spindle vibration by Hybrid Taguchi Principal component analysis (HTPCA)
|
|
Materials Today: Proceedings,
2017 |
|
|
|
|
[16]
|
Evaluation of Optimum Turning Process of Process Parameters Using DOE and PCA Taguchi Method
|
|
Materials Today: Proceedings,
2017 |
|
|
|
|
[17]
|
Optimizing The Process Parameters Of Electrical Discharge Machining On AA7075-SiC Alloys
|
|
Materials Today: Proceedings,
2017 |
|
|
|
|
[18]
|
Multi-objective optimization in end milling of GFRP composites using Taguchi techniques with principal component analysis
|
|
Multidiscipline Modeling in Materials and Structures,
2017 |
|
|
|
|
[19]
|
Framework for computing machining parameter settings in CNC machines: an industrial case study
|
|
International Journal of Computational Systems Engineering,
2015 |
|
|
|
|
[20]
|
Experimental investigations and optimization of the machinability aspects of AISI 4340 alloy steel using uncoated carbide and coated cermet inserts in dry hard turning
|
|
Thesis,
2015 |
|
|
|
|
[21]
|
Study on Optimizing the Best Additives to be Added to Vegetable Based Lubricant to Improve Machinability Performance
|
|
International Review of Mechanical Engigeering,
2015 |
|
|
|
|
[22]
|
Study on optimizing the best additives to be added to vegetable based lubricant to improve machinability performance.
|
|
2015 |
|
|
|
|
[23]
|
Effect of Process Parameters in Turning 20MnCr5 using Taguchi's
|
|
2015 |
|
|
|
|
[24]
|
Optimization of Surface Roughness in CNC Turning of Mild Steel (1018) using Taguchi method
|
|
Carbon,
2014 |
|
|
|
|
[25]
|
Experimental Study and Analysis of Grinding of Glass Fibre Reinforced Epoxy Composite Material
|
|
Diss. JADAVPUR UNIVERSITY KOLKATA, 2014.,
2014 |
|
|
|
|
[26]
|
Multi-performance optimisation in WEDM using Taguchi method embedded with utility concept
|
|
International Journal of Procurement Management,
2014 |
|
|
|
|
[27]
|
Optimization of Material Removal Rate in CNC Turning of Mild Steel 1018 using Taguchi method
|
|
Carbon,
2014 |
|
|
|
|
[28]
|
PERFORMANCE EVALUATION AND PARAMETRIC OPTIMIZATION OF HOT MACHINING PROCESS ON EN-8 MATERIAL
|
|
International Journal For Technological Research In Engineering,
2014 |
|
|
|
|
[29]
|
Multi-response Optimization in Dry Turning Process Using Taguchi's Approach and Utility Concept
|
|
Procedia Materials Science,
2014 |
|
|
|
|
[30]
|
Study the Effect of Vegetable-Based Lubricant on Surface Roughness during Milling Operation by Using Response Surface Methodology
|
|
Applied Mechanics and Materials,
2014 |
|
|
|
|
[31]
|
Multi response process parameter optimization of turning Al SiCP metal matrix composites
|
|
2014 |
|
|
|
|
[32]
|
A mathematical framework for parameter designing under the noise: A case study from a conventional turning machine
|
|
Industrial Engineering and Engineering Management (IEEM), 2013 IEEE International Conference on,
2013 |
|
|
|
|
[33]
|
Optimization of Turning Process Parameters by Using Tool Inserts-A Review
|
|
International Journal of Engineering and Innovative Technology (IJEIT)? ,
2012 |
|
|
|
|
[34]
|
Optimisation of the correlated responses of EDM process using modified principal component analysis–based utility theory
|
|
International Journal of Manufacturing Technology and Management? ,
2012 |
|
|
|
|
[35]
|
A modified principal component analysis-based utility theory approach for optimization of correlated responses of EDM process
|
|
International Journal of Engineering, Science and Technology,
2012 |
|
|
|
|
[36]
|
Optimisation of the correlated responses of EDM process using modified principal component analysis-based utility theory
|
|
International Journal of Manufacturing Technology and Management,
2012 |
|
|
|
|
[37]
|
Optimization of turning process parameters by using tool inserts− a review
|
|
Int. J. Eng. Innov. Technol.,
2012 |
|
|
|
|
[38]
|
A CASE STUDY ON SURFACE QUALITY IMPROVEMENT IN MACHINING PTFE USING PCA BASED TOPSIS METHOD
|
|
Advances in Modeling, Optimization and Computing,
2011 |
|
|
|