3D Printing Role in Filling the Critical Gap in the Medical Supply Chain during COVID-19 Pandemic

American Journal of Industrial and Business Management

ISSN Print: 2164-5167
ISSN Online: 2164-5175
www.scirp.org/journal/ajibm
E-mail: ajibm@scirp.org

Google-based Impact Factor: 0.92
Citations h5-index & Ranking*

Journals Menu

"3D Printing Role in Filling the Critical Gap in the Medical Supply Chain during COVID-19 Pandemic"
written by Mohsen Attaran,
published by American Journal of Industrial and Business Management, Vol.10 No.5, 2020

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Worldwide fight against COVID-19 using nanotechnology, polymer science, and 3D printing technology
	Polymer Bulletin, 2023

[2]	Analyzing the Barriers to Building a 3-D Printing Enabled Local Medical Supply Chain Ecosystem
	IEEE Transactions …, 2023

[3]	3D-printed medical models supply chain: barriers modeling and analysis
	Rapid Prototyping Journal, 2023

[4]	Research on Supply Chain Decisions for Production Waste Recovery and Reuse Based on a Recycler Focus
	Sustainability, 2023

[5]	Influence of 3D printing properties on relative dielectric constant in PLA and ABS materials
	Progress in Additive …, 2023

[6]	Organizational and Supply Chain Impacts of 3D Printers Implementation in the Medical Sector
	International Journal of Environmental …, 2022

[7]	L'impacte de la impressió 3D en la logística-Cas d'estudi: Impressió 3D de les plantilles dels jugadors d'hoquei patins de la Parlem Ok Lliga
	2022

[8]	3D Printing and Logistics
	Logistics 4.0 and Future of Supply Chains, 2022

[9]	A Structural Equation Modelling Approach to Develop a Resilient Supply Chain Strategy for the COVID-19 Disruptions
	Handbook of Research …, 2022

[10]	3D Printed Medical Accessories Using FDM Process for COVID-19 Virus
	ECS …, 2022

[11]	Understanding the Role of Existing Technology in the Fight Against COVID-19
	Pandemic Detection and Analysis Through Smart …, 2022

[12]	Covering the Gap between Fashion Industry and 3D Printing by Introducing it in Pakistan
	… Fashion Industry and 3D Printing by …, 2022

[13]	3D PRINTING AND ITS ROLE DURING THE COVID PANDEMIC
	IOP Conference Series …, 2022

[14]	Changes in Thermal Properties of Printouts Made of PETG and PLA Doped with Copper After Electrocorrosive Ageing Process
	Archives of Metallurgy and …, 2022

[15]	Major advancements of industry 4.0 to overcome challenges in manufacturing during the COVID-19 pandemic
	Cyber-Physical Systems, 2022

[16]	Translational design for limited resource settings as demonstrated by Vent-Lock, a 3D-printed ventilator multiplexer
	3D Printing in …, 2022

[17]	Dual-luminophore efficient luminescent solar concentrator fabricated by low-cost 3D printing
	Physica Scripta, 2022

[18]	The COVID-19 impact on supply chain operations of automotive industry: A case study of sustainability 4.0 based on Sense–Adapt–Transform framework
	Sustainability, 2022

[19]	Additive manufacturing is sustainable technology: citespace based bibliometric investigations of fused deposition modeling approach
	Rapid Prototyping …, 2022

[20]	Impact of strategic control and supply chain management on recycled plastic additive manufacturing
	Journal of Cleaner …, 2022

[21]	Bridging the research-practice gap in supply chain risks induced by the COVID-19
	Benchmarking: An International Journal, 2022

[22]	3D Printing During COVID-19: Challenges and Possible Solutions
	2022

[23]	Building supply chain resilience and efficiency through additive manufacturing: An ambidextrous perspective on the dynamic capability view
	International Journal of …, 2022

[24]	The Unprecedented Role of 3D Printing Technology in Fighting the COVID-19 Pandemic: A Comprehensive Review
	Materials, 2022

[25]	Dentistry 4.0 technologies applications for dentistry during COVID-19 pandemic
	2021

[26]	Emerging Technologies for Pandemic and Its Impact
	2021

[27]	Applications of additive manufacturing (AM) in sustainable energy generation and battle against COVID-19 pandemic: The knowledge evolution of 3D printing
	2021

[28]	Discovering the technology evolution pathways for 3D printing (3DP) using bibliometric investigation and emerging applications of 3DP during COVID-19
	2021

[29]	Literature and Media-Based Review of Personal Protective Equipment 3D Printing Efforts During COVID-19
	2021

[30]	UNIVERSITY CAPACITY TO RAISE PUBLIC AWARENESS OF MEASURES TO COMBAT COVID 19: A RUSSIAN UNIVERSITY EXPERIENCE
	2021

[31]	Development of Personal Protective Respirator Based on Additive Manufacturing Technologies in Fighting Against Pandemic
	Kocaeli Journal of Science and Engineering, 2021

[32]	Industrial applications of 3D printing to scale-up production of COVID-19-related medical equipment
	2021

[33]	Restoring the medical supply chain from below. The role of social entrepreneurship in the production of face masks during the COVID-19 crisis.
	2021

[34]	Coalitional strategies of the pharmaceutical supply chain with an option contract to cope with disruption risks
	2021

[35]	Lessons learned from humanitarian logistics to manage supply chain disruptions
	2021

[36]	Supply chain operations management in pandemics: a state-of-the-art review inspired by COVID-19
	2021

[37]	Additively manufactured respirators: quantifying particle transmission and identifying system-level challenges for improving filtration efficiency
	2021

[38]	Pedagogy and innovative care tenets in COVID-19 pandemic: An enhancive way through Dentistry 4.0
	2021

[39]	Transfiguring Healthcare: Three-Dimensional Printing in Pharmaceutical Sciences; Trends during COVID-19: A Review
	2021

[40]	Optimization of FFF Processing Parameters to Improve Geometrical Accuracy and Mechanical Behavior of Polyamide 6 Using Grey Relational Analysis (GRA)
	2021

[41]	The Vent-Lock Protocol: 3D Printing and Testing of A Ventilator Multiplexer to Enhance the Capacity of Treating Patients with COVID-19
	2020

[42]	Occupational Safety and Health and Response to COVID-19 using the Fourth Industrial Revolution Technologies
	2020

[43]	An analysis of the global additive manufacturing response to the COVID-19 pandemic
	2020

[44]	Partially RepRapable automated open source bag valve mask-based ventilator
	2020

[45]	Evaluate the impact of COVID-19 prevention policies on supply chain aspects under uncertainty
	2020

[46]	3D printing novel PPE for response to COVID-19 related shortages
	2020

[47]	Additive Manufacturing Enabled Supply Chain in Combating COVID-19
	2020

[48]	Exploring smart material applications for COVID-19 pandemic using 4D printing technology
	2020

[49]	Effect of 3D Printing Technology on 3C Product Manufacturing
	2020

[50]	Role of Additive Manufacturing in Medical Application COVID-19 Scenario: INDIA Case study
	2020

[51]	A review on additive manufacturing of polymers composites
	2020

[52]	Vent-Lock: A 3D Printed Ventilator Multiplexer to Enhance the Capacity of Treating Patients with COVID-19
	2020

[53]	Particle Transmission through Respirators Fabricated with Fused Filament Fabrication and Powder Bed Fusion Additive Manufacturing
	2020

[54]	Towards Reinforcing Healthcare 4.0: A Green Real-Time IIoT Scheduling and Nesting Architecture for COVID-19 Large-Scale 3D Printing Tasks
	2020

[55]	Sensors International

[1]	Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing 2023 DOI:10.1016/B978-0-323-91834-3.00018-1

[2]	3D-printed medical models supply chain: barriers modeling and analysis Rapid Prototyping Journal, 2023 DOI:10.1108/RPJ-11-2021-0312

[3]	Influence of 3D printing properties on relative dielectric constant in PLA and ABS materials Progress in Additive Manufacturing, 2023 DOI:10.1007/s40964-023-00411-0

[4]	Challenges of blockchain implementation in SMEs’ supply chains: an integrated IT2F-BWM and IT2F-DEMATEL method Electronic Commerce Research, 2023 DOI:10.1007/s10660-023-09696-3

[5]	Toward the development of a Preparedness and Response Protocol for epidemics and pandemics Production, 2023 DOI:10.1590/0103-6513.20220034

[6]	Dual- luminophore efficient luminescent solar concentrator fabricated by low-cost 3D printing Physica Scripta, 2023 DOI:10.1088/1402-4896/acab8f

[7]	Influence of 3D printing properties on relative dielectric constant in PLA and ABS materials Progress in Additive Manufacturing, 2023 DOI:10.1007/s40964-023-00411-0

[8]	Influence of 3D printing properties on relative dielectric constant in PLA and ABS materials Progress in Additive Manufacturing, 2023 DOI:10.1007/s40964-023-00411-0

[9]	Bridging the research-practice gap in supply chain risks induced by the COVID-19 Benchmarking: An International Journal, 2023 DOI:10.1108/BIJ-02-2022-0111

[10]	Supply chain risk assessment and mitigation under the global pandemic COVID-19 International Journal of Production Management and Engineering, 2023 DOI:10.4995/ijpme.2024.19240

[11]	Logistics 4.0 and Future of Supply Chains Accounting, Finance, Sustainability, Governance & Fraud: Theory and Application, 2022 DOI:10.1007/978-981-16-5644-6_5

[12]	Logistics 4.0 and Future of Supply Chains Accounting, Finance, Sustainability, Governance & Fraud: Theory and Application, 2022 DOI:10.1007/978-981-16-5644-6_5

[13]	3D PRINTING AND ITS ROLE DURING THE COVID PANDEMIC IOP Conference Series: Materials Science and Engineering, 2022 DOI:10.1088/1757-899X/1224/1/012006

[14]	Additive manufacturing is sustainable technology: citespace based bibliometric investigations of fused deposition modeling approach Rapid Prototyping Journal, 2022 DOI:10.1108/RPJ-05-2021-0112

[15]	Handbook of Research on Supply Chain Resiliency, Efficiency, and Visibility in the Post-Pandemic Era Advances in Logistics, Operations, and Management Science, 2022 DOI:10.4018/978-1-7998-9506-0.ch013

[16]	The COVID-19 Impact on Supply Chain Operations of Automotive Industry: A Case Study of Sustainability 4.0 Based on Sense–Adapt–Transform Framework Sustainability, 2022 DOI:10.3390/su14105855

[17]	Organizational and Supply Chain Impacts of 3D Printers Implementation in the Medical Sector International Journal of Environmental Research and Public Health, 2022 DOI:10.3390/ijerph19127057

[18]	3D-printed medical models supply chain: barriers modeling and analysis Rapid Prototyping Journal, 2022 DOI:10.1108/RPJ-11-2021-0312

[19]	Bridging the research-practice gap in supply chain risks induced by the COVID-19 Benchmarking: An International Journal, 2022 DOI:10.1108/BIJ-02-2022-0111

[20]	Dentistry 4.0 technologies applications for dentistry during COVID-19 pandemic Sustainable Operations and Computers, 2021 DOI:10.1016/j.susoc.2021.05.002

[21]	An analysis of the global additive manufacturing response to the COVID-19 pandemic Journal of Manufacturing Technology Management, 2021 DOI:10.1108/JMTM-07-2020-0263

[22]	3D Printing in Medicine and Its Role in the COVID-19 Pandemic 2021 DOI:10.1007/978-3-030-61993-0_2

[23]	Lessons learned from humanitarian logistics to manage supply chain disruptions Journal of Supply Chain Management, 2021 DOI:10.1111/jscm.12253

[24]	Supply Chain Operations Management in Pandemics: A State-of-the-Art Review Inspired by COVID-19 Sustainability, 2021 DOI:10.3390/su13052504

[25]	Development of Personal Protective Respirator Based on Additive Manufacturing Technologies in Fighting Against Pandemic Kocaeli Journal of Science and Engineering, 2021 DOI:10.34088/kojose.833205

[26]	Hybrid Artificial Intelligence and IoT in Healthcare Intelligent Systems Reference Library, 2021 DOI:10.1007/978-981-16-2972-3_14

[27]	Coalitional strategies of the pharmaceutical supply chain with an option contract to cope with disruption risks International Journal of Logistics Research and Applications, 2021 DOI:10.1080/13675567.2021.1949700

[28]	Lessons learned from humanitarian logistics to manage supply chain disruptions Journal of Supply Chain Management, 2021 DOI:10.1111/jscm.12253

[29]	Development of Personal Protective Respirator Based on Additive Manufacturing Technologies in Fighting Against Pandemic Kocaeli Journal of Science and Engineering, 2021 DOI:10.34088/kojose.833205

[30]	Additive Manufacturing Enabled Supply Chain in Combating COVID-19 Journal of Industrial Integration and Management, 2020 DOI:10.1142/S2424862220500244

[31]	Exploring Smart Material Applications for COVID-19 Pandemic Using 4D Printing Technology Journal of Industrial Integration and Management, 2020 DOI:10.1142/S2424862220500219

[32]	A review on additive manufacturing of polymers composites Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.10.490

[33]	Towards Reinforcing Healthcare 4.0: A Green Real-Time IIoT Scheduling and Nesting Architecture for COVID-19 Large-Scale 3D Printing Tasks IEEE Access, 2020 DOI:10.1109/ACCESS.2020.3040544

[34]	3D printing novel PPE for response to COVID-19 related shortages 16th International Symposium on Medical Information Processing and Analysis, 2020 DOI:10.1117/12.2579555

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

American Journal of Industrial and Business Management

American Journal of Industrial and Business Management

Journals Menu

Home

About SCIRP

Service

Policies