|
[1]
|
Optimization of 3D printed polylactic acid structures with different infill patterns using Taguchi-grey relational analysis
Advanced Industrial and Engineering Polymer Research,
2023
DOI:10.1016/j.aiepr.2022.06.002
|
|
|
|
|
[2]
|
Adaptive 3D Printing for In Situ Adjustment of Mechanical Properties
Advanced Intelligent Systems,
2023
DOI:10.1002/aisy.202200229
|
|
|
|
|
[3]
|
Fracture Analysis of a 3D-Printed ABS Specimen: Effects of Raster Angle and Layer Orientation
Physical Mesomechanics,
2023
DOI:10.1134/S1029959923010034
|
|
|
|
|
[4]
|
PETG/carbon fiber composites with different structures produced by 3D printing
Polymer Testing,
2023
DOI:10.1016/j.polymertesting.2023.107949
|
|
|
|
|
[5]
|
Modal response of hybrid raster orientation on material extrusion printed acrylonitrile butadiene styrene and polyethylene terephthalate glycol under thermo-mechanical loads
Polymer Testing,
2023
DOI:10.1016/j.polymertesting.2023.107953
|
|
|
|
|
[6]
|
Compressive response versus power consumption of acrylonitrile butadiene styrene in material extrusion additive manufacturing: the impact of seven critical control parameters
The International Journal of Advanced Manufacturing Technology,
2023
DOI:10.1007/s00170-023-11202-w
|
|
|
|
|
[7]
|
Compressive response versus power consumption of acrylonitrile butadiene styrene in material extrusion additive manufacturing: the impact of seven critical control parameters
The International Journal of Advanced Manufacturing Technology,
2023
DOI:10.1007/s00170-023-11202-w
|
|
|
|
|
[8]
|
Experimental investigation of parameters in fused filament fabrication 3D printing process of ABS plus using response surface methodology
The International Journal of Advanced Manufacturing Technology,
2023
DOI:10.1007/s00170-023-11468-0
|
|
|
|
|
[9]
|
Mixed-mode fracture prediction of acrylonitrile butadiene styrene material fabricated via fused deposition modeling
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,
2023
DOI:10.1177/14644207221133458
|
|
|
|
|
[10]
|
Materials Design and Applications IV
Advanced Structured Materials,
2023
DOI:10.1007/978-3-031-18130-6_6
|
|
|
|
|
[11]
|
The effect of printing parameters on tensile properties of thermoplastics prepared by fused deposition modeling (FDM) based additive manufacturing technique
Materials Today: Proceedings,
2023
DOI:10.1016/j.matpr.2023.06.212
|
|
|
|
|
[12]
|
Experimental Study of the Effect of Strain Rate on the Mechanical Behavior of Assorted Thermoplastic Polymers
Journal of Materials Engineering and Performance,
2023
DOI:10.1007/s11665-023-08452-w
|
|
|
|
|
[13]
|
Effect of FDM printing patterns on mechanical properties of ABS
Rapid Prototyping Journal,
2023
DOI:10.1108/RPJ-04-2023-0130
|
|
|
|
|
[14]
|
Adaptive 3D Printing for In Situ Adjustment of Mechanical Properties
Advanced Intelligent Systems,
2022
DOI:10.1002/aisy.202200229
|
|
|
|
|
[15]
|
Effect of printing speed on tensile and fracture behavior of ABS specimens produced by fused deposition modeling
Engineering Fracture Mechanics,
2022
DOI:10.1016/j.engfracmech.2022.108393
|
|
|
|
|
[16]
|
Effect of printing speed on tensile and fracture behavior of ABS specimens produced by fused deposition modeling
Engineering Fracture Mechanics,
2022
DOI:10.1016/j.engfracmech.2022.108393
|
|
|
|
|
[17]
|
Optimization of FDM Printing Process Parameters on Surface Finish, Thickness, and Outer Dimension with ABS Polymer Specimens Using Taguchi Orthogonal Array and Genetic Algorithms
Mathematical Problems in Engineering,
2022
DOI:10.1155/2022/2698845
|
|
|
|
|
[18]
|
Effect of printing speed on tensile and fracture behavior of ABS specimens produced by fused deposition modeling
Engineering Fracture Mechanics,
2022
DOI:10.1016/j.engfracmech.2022.108393
|
|
|
|
|
[19]
|
Advances in Chemical, Bio and Environmental Engineering
Environmental Science and Engineering,
2022
DOI:10.1007/978-3-030-96554-9_33
|
|
|
|
|
[20]
|
Optimization of 3D printed polylactic acid structures with different infill patterns using Taguchi-grey relational analysis
Advanced Industrial and Engineering Polymer Research,
2022
DOI:10.1016/j.aiepr.2022.06.002
|
|
|
|
|
[21]
|
Mixed-mode fracture prediction of acrylonitrile butadiene styrene material fabricated via fused deposition modeling
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,
2022
DOI:10.1177/14644207221133458
|
|
|
|
|
[22]
|
Thickness effect on the fracture behavior of structural components fabricated via Fused Deposition Modeling
Procedia Structural Integrity,
2021
DOI:10.1016/j.prostr.2021.12.014
|
|
|
|
|
[23]
|
Fused filament printing of specialized biomedical devices: a state-of-the art review of technological feasibilities with PEEK
Rapid Prototyping Journal,
2021
DOI:10.1108/RPJ-06-2020-0139
|
|
|
|
|
[24]
|
The influence of process parameters on the impact resistance of 3D printed PLA specimens under water-absorption and heat-treated conditions
Rapid Prototyping Journal,
2021
DOI:10.1108/RPJ-02-2020-0037
|
|
|
|
|
[25]
|
Thickness effect on the fracture behavior of structural components fabricated via Fused Deposition Modeling
Procedia Structural Integrity,
2021
DOI:10.1016/j.prostr.2021.12.014
|
|
|
|
|
[26]
|
On the Compressive Response of Polymeric Cellular Materials
Materials,
2020
DOI:10.3390/ma13020457
|
|
|
|
|
[27]
|
The influence of in-plane raster angle on tensile and fracture strengths of 3D-printed PLA specimens
Engineering Fracture Mechanics,
2020
DOI:10.1016/j.engfracmech.2020.107225
|
|
|
|
|
[28]
|
On the Strain Rate Sensitivity of Fused Filament Fabrication (FFF) Processed PLA, ABS, PETG, PA6, and PP Thermoplastic Polymers
Polymers,
2020
DOI:10.3390/polym12122924
|
|
|
|
|
[29]
|
Mechanical Properties, Structure and Fracture Behavior of Additive Manufactured FFF-ABS Specimens
Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology,
2020
DOI:10.35219/awet.2020.11
|
|
|
|