Journal of Surface Engineered Materials and Advanced Technology

Journal of Surface Engineered Materials and Advanced Technology

ISSN Print: 2161-4881
ISSN Online: 2161-489X
www.scirp.org/journal/jsemat
E-mail: jsemat@scirp.org
"The Behaviour of Superalloys in Marine Gas Turbine Engine Conditions"
written by I. Gurrappa, A. K. Gogia, I. V. S. Yashwanth,
published by Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Influence of Temperature, Impingement Angle, Velocity and Standoff Distance on the Erosion Characteristics of Inconel 718 and Ti-6Al-4V
Surface Review and …, 2022
[2] Corrosion Mechanism of a Plasma Nitriding–Treated Alloy
2021
[3] High temperature erosion behavior of cast nickel base 73Ni-13Cr-4Sn-4Bi-Mo alloy
2019
[4] Solid Particle Erosion Behavior of Cast CY5SnBiM at Room Temperature
2019
[5] THE UTILIZATION OF BAY LEAF (SyzygiumpolyanthumWalp) FLOUR IN FEED ON CARCASS QUALITY, MICROFLORA INSTESTINE OF BROILER
2019
[6] PASSIVE DOSIMETRY: COMPARATIVE STUDY BETWEEN TWO EVALUATION METHODS OF OCCUPATIONAL EXPOSURE TO PESTICIDES
International Journal of Research - GRANTHAALAYAH, 2019
[7] Mechanistic studies on degradation in High-temperature sliding wear behavior of Al2O3-60TiO2 on Hastelloy X superalloy at 500οC
2018
[8] Degradation mechanism for high-temperature sliding wear in surface-modified In718 superalloy
Cogent Engineering, 2018
[9] EXPERIMENTAL STUDY ON THE STRENGTH DEVELOPMENT ON CONCRETE BY PARTIAL REPLACEMENT OF COARSE AGGREGATES BY WASTED TRUCK …
2017
[10] Effect of Heat Treatment on the Corrosion Behaviour of GTM-SU-718 Superalloy in NaCl, HCl and H2SO4 environments
2017
[11] High-Temperature Erosion and its Mechanisms of Hastelloy X Superalloy under Hot Air Jet Conditions
2017
[12] EXPERIMENTAL STUDY ON THE STRENGTH DEVELOPMENT ON CONCRETE BY PARTIAL REPLACEMENT OF COARSE AGGREGATES BY WASTED TRUCK TYRE PIECES
International Journal of Research, 2017
[13] Corrosion Characteristics of New Superalloy Under Industrial Environmental Conditions
Journal of Materials Engineering and Performance, 2017
[14] Studies on thermally grown oxide as an interface between plasma-sprayed coatings and a nickel-based superalloy substrate
International Journal of Minerals, Metallurgy, and Materials, 2017
[15] An investigation and comparative analysis on marine gas turbine rotor blade with cooling holes using FEA
International Journal of Aerodynamics, 2016
[16] Manufacturing and Application of Gas Turbines
ProQuest Dissertations Publishing, 2016
[17] Mechanistic studies on degradation in sliding wear behavior of IN718 and Hastelloy X superalloys at 500° C
Tribology International, 2016
[18] COMPARATIVE ANALYSIS OF ADVANCED GAS TURBINE BLADE MATERIALS USED IN AIRCRAFT APPLICATIONS
International Journal of Innovative Research in Technology, Science & Engineering, 2015
[19] Paper No. YSF4
2015
[20] The corrosion mechanism of 1Cr18Ni9Ti alloy used for an underwater craft component
Anti-Corrosion Methods and Materials, 2015
[21] Degradation Through Erosion: Mechanistic Studies on IN-718 Superalloy Under Hot Air Jet Conditions
Journal of Materials Engineering and Performance, 2015
[22] Paper No. YSF24
2015
[23] Degradation mechanism for high temperature erosion in surface modified IN718 superalloy
Surface Engineering, 2015
[24] Hot Corrosion behaviourof Nanostructured AlCrN and TiAlN Coatings on Super Co 605 Substrate
RS Bangari, VK Tewari, 2014
[25] Oxidation & Hot Corrosion Behavior of Nickel Based Superalloy for Gas Turbine Applications
Materials and Manufacturing Processes, 2014
[26] ANALYTICAL COMPARATIVE STUDY OF GAS TURBINE BLADE MATERIALS USED IN MARINE APPLICATIONS USING FEA TECHNIQUES
environments, 2014
[27] Corrosion Mechanism of 12Cr2NiWVA Cylinder Liners
Asian Journal of Chemistry, 2014
[28] Corrosion Mechanism of 12Cr2NiWVA Cylinder Liners [dagger]
Asian Journal of Chemistry, 2014
[29] Oxidation and hot corrosion behavior of nickel-based superalloy for gas turbine applications
Materials and Manufacturing Processes, 2014
[30] The Importance of Corrosion and the Necessity of Applying Intelligent Coatings for Its Control
Intelligent Coatings for Corrosion Control, 2014
[31] Effect of Salt Coatings o Nickel-base Su
2013
[32] Hot corrosion behaviour of nickel based superalloy
2013
[33] CORROSION BEHAVIOUR OF SUPERALLOYS AT HIGH TEMPERATURE
KS VADAYAR, SD RANI - irnetexplore.ac.in, 2013
[34] Sulfidation Characteristics of an Advanced Superalloy and Comparison with Other Superalloys Intended for Gas Turbine Use
Metallurgical and Materials Transactions A, 2013
[35] Effect of Salt Coatings on Low Cycle Fatigue Behavior of Nickel-base Superalloy GTM-SU-718
Procedia Engineering, 2013
[36] HOT CORROSION BEHAVIOUR OF NICKEL BASED SUPERALLOYS
KS VADAYAR, SD RANI - interscience.in, 2013
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top