The Influence of Different Sterilization Techniques on the Time-Dependent Behavior of Polyamides

Journal of Biomaterials and Nanobiotechnology

ISSN Print: 2158-7027
ISSN Online: 2158-7043
www.scirp.org/journal/jbnb
E-mail: jbnb@scirp.org

Google-based Impact Factor: 1.69
Citations h5-index & Ranking*

Journals Menu

"The Influence of Different Sterilization Techniques on the Time-Dependent Behavior of Polyamides"
written by G. Kubyshkina, B. Zupančič, M. Štukelj, D. Grošelj, L. Marion, I. Emri,
published by Journal of Biomaterials and Nanobiotechnology, Vol.2 No.4, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	The influence of UV irradiation on fish skin collagen films in the presence of xanthohumol and propanediol
	Spectrochimica Acta Part A: Molecular and …, 2022

[2]	Effects of Steam Heat and Dry Heat Sterilization on Thermal and Mechanical Properties of Nylon and Policarbonate in Fabrication with Fused Filament
	Key Engineering …, 2021

[3]	The external manipulation of collagen type I using inorganic ions and topographical cues
	2020

[4]	Vpliv aditiva na morfološke, mehanske in reološke lastnosti recikliranega polipropilena
	2020

[5]	Removal of Aluminium in Contaminated Soil using Locally Isolated Vibrio alginolyticus
	2019

[6]	Tailoring mechanical properties of polyamide by affecting its inherent structure
	2019

[7]	Karakterisasi Bakteri Brochothrix thermosphacta dan Vibrio alginolyticus serta Potensinya untuk Mereduksi Aluminium dalam Air Limbah
	2018

[8]	Low-energy electron-beam treatment as alternative for on-site sterilization of highly functionalized medical products–A feasibility study
	Radiation Physics and Chemistry, 2018

[9]	RobustNot-Dokumentasjon av mekaniske egenskaper og dimensjoner til notlin i oppdrettsnøter
	2018

[10]	Toxicity test of aluminium to Vibrio alginolyticus as a preliminary test of contaminated soil remediation
	2018

[11]	Importance of crosslinking strategies in designing smart biomaterials for bone tissue engineering: A systematic review
	2018

[12]	UJI KEMAMPUAN BAKTERI Azotobacter DALAM PROSES PENYISIHAN LOGAM KROMIUM PADA TANAH TERCEMAR KROMIUM
	2017

[13]	Isolation and characterization of bacteria capable of degrading poly (lactic acid) at ambient temperature
	Polymer Degradation and Stability, 2017

[14]	Tensile Strength of Nylon Netting Subjected to Various Concentrations of Disinfecting Chemicals
	2017

[15]	Sterilization effects on ultrathin film polymer coatings for silicon‐based implantable medical devices
	Journal of Biomedical Materials Research Part A, 2017

[16]	Uji Pemanfaatan Pupuk Organik Cair Lindi Dengan Penambahan Bakteri Starter Terhadap Pertumbuhan Tanaman Pangan (Sorghum bicolor dan Zea mays)
	2017

[17]	UJI PEMANFAATAN PUPUK ORGANIK CAIR LINDI DENGAN PENAMBAHAN BAKTERI STARTER TERHADAP PERTUMBUHAN TANAMAN PANGAN …
	2017

[18]	Uji Pemanfaatan Pupuk Organik Cair Lindi Dengan Penambahan Bakteri Starter Terhadap Pertumbuhan Tanaman Pangan (Sorghum bicolor dan Zea …
	2017

[19]	Study on mechanical, thermal and morphological properties of wood polymer composites
	2016

[20]	Microbiological Load of Ethylene Oxide Sterilized Medical Devices and its Elimination by Cobalt 60 Source
	2016

[21]	Optimisation of UV irradiation as a binding site conserving method for crosslinking collagen-based scaffolds
	Journal of Materials Science: Materials in Medicine, 2016

[22]	Viscosity and creep compliance of polyoxymethylene copolymers of various average molecular weights
	Polimery, 2015

[23]	Processability and mechanical properties of extensively recycled high density polyethylene
	Polymer Degradation and Stability, 2015

[24]	Selection of appropriate polyoxymethylene based binder for feedstock material used in powder injection moulding
	Journal of Physics: Conference Series, 2015

[25]	Effectiveness of internal chemical indicator strips for class iv and v
	Indonesian Journal of …, 2015

[26]	Antimicrobial coatings for soft materials
	Thèse, 2014

[27]	Prediction of viscoelastic material functions from constant stress-or strain-rate experiments
	Mechanics of Time-Dependent Materials, 2014

[28]	Gradient Implants and Solid-State Drug Delivery Systems
	Conference Paper, 2014

[29]	Insights into discharge argon-mediated biofilm inactivation
	Biofouling, 2013

[30]	Powder Injection Molding of Metal and Ceramic Parts
	Some Critical Issues for …, 2012

[31]	Time-dependent properties of multimodal polyoxymethylene based binder for powder injection molding
	Journal of Solid Mechanics and Materials Engineering, 2012

[32]	Time-Dependent Properties of Multimodal Polyoxymethylene based binder for Powder Injection Molding* ?asovno odvisne lastnosti multimodalnih, na polioksimetilenu temelje?ih veziv pra?kov za brizganje
	J GONZALEZ-GUTIERREZ, GB STRINGARI… - anali-pazu.si, 2011

[1]	The influence of UV irradiation on fish skin collagen films in the presence of xanthohumol and propanediol Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 2022 DOI:10.1016/j.saa.2022.121652

[2]	The influence of UV irradiation on fish skin collagen films in the presence of xanthohumol and propanediol Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 2022 DOI:10.1016/j.saa.2022.121652

[3]	The influence of UV irradiation on fish skin collagen films in the presence of xanthohumol and propanediol Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 2022 DOI:10.1016/j.saa.2022.121652

[4]	Effects of Steam Heat and Dry Heat Sterilization on Thermal and Mechanical Properties of Nylon and Policarbonate in Fabrication with Fused Filament Key Engineering Materials, 2021 DOI:10.4028/www.scientific.net/KEM.891.150

[5]	3D printed polymers are less stable than injection moulded counterparts when exposed to terminal sterilization processes using novel vaporized hydrogen peroxide and electron beam processes Polymer, 2019 DOI:10.1016/j.polymer.2019.121870

[6]	Low-energy electron-beam treatment as alternative for on-site sterilization of highly functionalized medical products – A feasibility study Radiation Physics and Chemistry, 2018 DOI:10.1016/j.radphyschem.2018.04.008

[7]	Tensile Strength of Nylon Netting Subjected to Various Concentrations of Disinfecting Chemicals Journal of Offshore Mechanics and Arctic Engineering, 2018 DOI:10.1115/1.4040562

[8]	Toxicity test of aluminium to Vibrio alginolyticus as a preliminary test of contaminated soil remediation 2018 DOI:10.1063/1.5082435

[9]	Isolation and characterization of bacteria capable of degrading poly(lactic acid) at ambient temperature Polymer Degradation and Stability, 2017 DOI:10.1016/j.polymdegradstab.2017.08.023

[10]	Sterilization effects on ultrathin film polymer coatings for silicon-based implantable medical devices Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2017 DOI:10.1002/jbm.b.34039

[11]	AAMI TIR17:2017/(R)2020; Compatibility of materials subject to sterilization 2017 DOI:10.2345/9781570207006.ch1

[12]	Optimisation of UV irradiation as a binding site conserving method for crosslinking collagen-based scaffolds Journal of Materials Science: Materials in Medicine, 2016 DOI:10.1007/s10856-015-5627-8

[13]	Processability and mechanical properties of extensively recycled high density polyethylene Polymer Degradation and Stability, 2015 DOI:10.1016/j.polymdegradstab.2015.01.012

[14]	Selection of appropriate polyoxymethylene based binder for feedstock material used in powder injection moulding Journal of Physics: Conference Series, 2015 DOI:10.1088/1742-6596/602/1/012001

[15]	Prediction of viscoelastic material functions from constant stress- or strain-rate experiments Mechanics of Time-Dependent Materials, 2014 DOI:10.1007/s11043-013-9231-3

[16]	Insights into discharge argon-mediated biofilm inactivation Biofouling, 2013 DOI:10.1080/08927014.2013.832222

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Biomaterials and Nanobiotechnology

Journal of Biomaterials and Nanobiotechnology

Journals Menu

Home

About SCIRP

Service

Policies